Obviously depends on the devices and the pool protocol ...

I've had 8 SC and 2 FPGA on one Pi running MinePeon 0.2.2, it worked, only ran it for a day or so. I opted for one Pi per shelf in the rack so if I had a failure, I minimized the impact. Time is money, redundancy is king. Pi r cheap. (Or Pi r squared, whichever you prefer.  )

Thanks, I enjoy doing it and I am glad you enjoy using it.


Possibly (probably).  I believe they both use standard drivers that are already present in cgminer and bfgminer.

Neil

P.S. It is one of my pet peeves that mining hardware companies release these things and expect the developers to buy a device to build support for them.  At the very least they should be sending one to Con, Kano and Luke.

I think neither of them will work up front.
BKK has written a cgminer driver for the Klondike (and I have provided minor input into that) but I've no idea what's actually going to happen there with the actual hardware.

Bitburner? We've never heard anything from them.
If it is a pure Avalon clone, it may work.
But I've also got nothing to do with Avalon at all (ckolivas has one) so I can't say what will happen there.
(He had to pay for his Avalon ... 50BTC ... and since then the Avalon performance has gone from ~70GH/s to ~80GH/s thanks to him ...)

The problem is that a lot of people seem to think we ask for hardware with an agenda to simply be given stuff for free.
(The whole Me vs GitSyncom drama should have made that clear - "proper support" is provided by ckolivas - many months after they said they would provide it but never did)

When Klondike finally appears and people release them, the basic board is like ... 15GH/s?
So yeah I'm really gonna make a fortune from that in a month or two
Next week I'll have 130GH/s courtesy of the company that a lot of people hate (I already have 70)
So it sorta puts the whole "You only want a Klondike for free" into the realms of ... why should I have people abuse me for that ...

I sold an Icarus for $1800 back in Apr coz I had 2, I kept the 2nd one coz I need it to support cgminer.
I will keep the 'tiny' devices mining probably long after they cost more to run than they generate coz it means I can easily test changes on the hardware "We Support"

Yes it peeves me also

... and I will add of course what most know but never hurts to remind people, MineForeman.com paid and posted my RPi to me.
Thanks again

... and sorry to derail the thread ... yeah this is how I sometimes start a war around here ... but I don't think it will this time

Yep post a link I'll even run it - the clock next to me is getting rather boring

Thanks for your replies,
sounds there is some trouble between free software developers and hardware companys.

BKK and Burnin will deliver their own cgminer driver. I believe cgminer have to be compiled with this drivers.
Obviously I over estimated the importance of these custom designs, so i thought there will be a newer MinePeon version with the special compiled
cgminer.

Greetings


P.s. Link for Burnins Bitburner:

https://bt.irlbtc.com/view/179769.0

Hi cardcomm (again)
Could you post a link to what you've done please?
As I said, would be good to have anything useful showing on it rather than just the time
(Yes I will get to doing something about it soon ...)

Please try to "kill a cat" and you'll see the problem is solved... But I can't do any more comments or I'm risking to be slapped again by Neil...

See my comment, regarding this problem, in this thread (and Neil's answer): https://bt.irlbtc.com/view/137934.msg2732667#msg2732667

Hi Kano,

Here's the link to to code on github:

https://github.com/cardcomm/cgminerLCDStats

Sorry for the delay. I got bogged down last night with some last minute changes adding some rounding code. I belatedly realized the display would get badly scrambled if the hash rate was too large. I'm still not sure how well it's going to display higher average hash rates - looking for your input on that one since I only have the one Block Erupter at the moment  haha

Also, I'm attempting to check for problems with cgminer, and display a warning screen. Right now I'm showing the error screen if I can't connect to the API, if cgminer isn't returning "Alive" in the STATUS call, or if the NOTIFY call is returning "Reason Not Well" other than none, or a "Last Not Well" code of non-zero. Is there anything else I should be checking?

Thanks for trying the code, looking forward to any feedback you have.