So after more struggling, i still cant fix it :/

Here is a link to the driver 352.84.

An update that allows solo mining of PASC/PASL in dual mode would be much appreciated.

Hi @Claymore

I just decided to mine both ETH and SIA at the same time using EthDcrMiner64 v9.7 but I see a big difference in speed when mining.
On the front page you listed that I can dual mine "with no impact on Ethereum mining speed".
I have 2 R9 290x which mine at around 32mh/s on ETH (single mode). When dual mining ETH & SIA, I get around 20-23mh/s on ETH and 700 mh/s on SIA.

Am I doing something wrong?

Here's my config.txt file


And my start.bat


Both pools are accepting my shares so I know those are configured right.
Thanks!

Thank you very much, i'll give that a go

Hi, i have a rx 580 Nitro+ 4Gb gpu, with a power supply of 650w

if I only use ethereum mode, all its fine (24mh/s) but, when I try dual mining, after a short time, my pc reboots, could it be caused by lack of current or voltage?

I run the miner only with required parameters, epool dpool wallets, and passwords, my rx 580 is NOT modded and running at 60-64ºC

Could anyone help me with that?

Also.. which pool is the best for 1 GPU?

Thanks

Hi team,
New to mining so apologize for the noob quesition. If I'm mining with Claymore at ~42Mh/s, and I have 550 total shares, when does the account get setup? GPU GTX 1080
Account# 0xea515a90ee5598b38cc9eb3de23d03e3006aa921

Claymore settings:
epools
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.

 POOL: eth-eu.dwarfpool.com:8008, WALLET: 0xea515a90ee5598b38cc9eb3de23d03e3006aa921/YourWorker, PSW: x, ESM: 0, ALLPOOLS: 0
 POOL: us1.ethermine.org:4444, WALLET: 0xea515a90ee5598b38cc9eb3de23d03e3006aa921.YourWorker, PSW: x, ESM: 1, ALLPOOLS: 0
# POOL: coinotron.com:3344, WALLET: YourUserName.YourWorkerName, PSW: YourWorkerPass, WORKER: , ESM: 2, ALLPOOLS: 1
# POOL: us-east1.ethereum.miningpoolhub.com:20535, WALLET: YourLogin.YourWorkerName, PSW: YourWorkerPass, WORKER: YourLogin.YourWorkerName, ESM: 2

Config

# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!

-epool http://us1.ethpool.org:3333
-ewal 0xea515a90ee5598b38cc9eb3de23d03e3006aa921
-epsw x
#-dpool stratum+tcp://yiimp.ccminer.org:4252
#-dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4
#-dpsw x
-esm 1
-mode 1
-tt 70
#-asm 0

I use Win 7 64 bit on one my pc and drivers are 372.70 v. And my Asus nvidia 1060 3 Gb give 24 Mh eth average

Hi guys
I have gone crazy to setup 6 GPU, 5 works ok with no problem
When I enable the 6th one after 10-15 minutes   cpu usage goes high and reach 90%. no program with high cpu in task manager but "system"
tried with MSI afterburner running to speed up fans, and without it  
If I leave it like that after a while claymore gives error. or system freeze before WatchDog could restart.

All 6 GPU are detected and working fine, tried to run with 5 and cycle the 6th one to check if problem is from risers or power cables ( Disabled pcie1 , run with 5, disabled pcie2 run with 5 .... )
All ok with 5 GPU no matter which one, as soon as I enable 6th the cpu goes high.
system is :
Windows 10, 1703 , all drivers updated to latest with "Driver Booster"
Mobo: MSI Z170A XPower Gaming Titanium Edition
PSU: Thermaltake Toughpower XT Gold 1275W
GPU: 6x 1070 Asus Dual 8OG
Ram: ADATA XPG Z1 DDR4 8GB 2800MHz CL17 Dual Channel
CPU: Pentium G4400 3.3GHz LGA 1151 Skylake CPU
HDD: SAMSUNG 750 EVO 120GB SATAIII Solid State Drive


PEG0, PEG1, PEG2 gen 1 (tried with auto too)
4G enabled
IGD disabled (tried with enable too)