<<  >> (p.793)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591478 times)

    • johndoe2
    Newbie
    *
    Offline Offline

    Activity: 21
    Merit: 0


    View Profile
    September 04, 2017, 06:46:48 PM
    Last edit: September 04, 2017, 08:51:13 PM by johndoe2
     #15841
    How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.

  • mccampser
    Sr. Member
    ****
    Offline Offline

    Activity: 290
    Merit: 250



    View Profile
    September 04, 2017, 06:56:38 PM
     #15842
    Quote from: Klaasje on September 04, 2017, 04:43:48 PM
    Quote from: ginmac on September 04, 2017, 04:04:06 PM
    Quote from: P00P135 on September 04, 2017, 02:09:47 PM
    Quote from: ginmac on September 04, 2017, 10:28:47 AM
    Wow,  Vega 64 - 43.5MH/s at 130W: http://wccftech.com/amd-rx-vega-64-pushed-43-5mhs-130w-mining-ethereum-eclipsing-polaris-efficiency-factor-2x/  Really???

    "Our test bed idles at 138 watts and the entire system consumes an average of about ~385 watts under load while mining."  Big difference than that clickbait 130w.

    OK, so this screens is a fake? https://imgur.com/a/1GgvR



    And no FAKE that high hashrate iff you look closely they get it on Ubiq NOT ether haha
    So DAG file much smaller only way to get higher hashrate so far

    i am just testing it and i get 44.2mh on vega 64 (custom water cooled) but only with power target +50% core 852 mem 1100.
    while setting power target to -25% max ram speed is 500 - there seems to be a bug in blockchain driver. will test stable driver soon

  • stef_stef
    Full Member
    ***
    Offline Offline

    Activity: 144
    Merit: 100


    View Profile
    September 04, 2017, 07:34:43 PM
     #15843
    What could be the cause for this error message and how do I fix it?

    "Socket was closed remotely (by pool)"

    After that, the miner shuts down

  • Munhenhos
    Member
    **
    Offline Offline

    Activity: 72
    Merit: 10


    View Profile
    September 04, 2017, 07:37:56 PM
     #15844
    Quote from: waster29 on September 04, 2017, 06:59:25 AM
    Hi Claymore .
    Can you please add allcoins ubq next update .. Thats will be great
    Thanks

    what do you mean by adding ubq? I'm mining with ubq with Claymore miner at the moment.

  • Munhenhos
    Member
    **
    Offline Offline

    Activity: 72
    Merit: 10


    View Profile
    September 04, 2017, 07:39:32 PM
     #15845
    Quote from: Evan on September 04, 2017, 12:34:50 AM
    Quote from: Frynew on September 03, 2017, 06:37:51 PM
    Im brand new here, trying to mine eth with a G73 laptop running windows 7 w/ a GTX 460M, currently getting this error:


    -----------------------------------------------------------------------------------------------------------------------
    12:29:22:153   129c   ETH: job changed
    12:29:22:153   129c   new buf size: 0
    12:29:22:278   8bc   Setting DAG epoch #141...
    12:29:23:994   1974   NVML: cannot get fan speed, error 3
    12:29:25:088   8bc   Setting DAG epoch #141 for GPU0
    12:29:25:088   8bc   Create GPU buffer for GPU0
    12:29:25:104   8bc   CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

    12:29:27:275   1974   NVML: cannot get fan speed, error 3
    12:29:28:117   8bc   Set global fail flag, failed GPU0
    12:29:28:117   8bc   GPU 0 failed
    12:29:28:149   1864   Setting DAG epoch #141 for GPU0
    12:29:28:164   1864   GPU 0, CUDA error 11 - cannot write buffer for DAG
    ------------------------------------------------------------------------------------------------------------------------


    Any help would be greatly appreciated!, Thank you




    sidenote: just checked GPU RAM &:

    Total available memory: 4095 MB
    Dedicated Video Memory: 1536 MB
    System Video Memory : 0 MB
    Sharsed System Memory: 2559 MB

    IF you are trying to break your laptop - just give it to me.


    you can't mine ethereum, not enough dedicated memory on your GPU.

  • sanhwy
    Newbie
    *
    Offline Offline

    Activity: 13
    Merit: 2


    View Profile
    September 04, 2017, 08:05:52 PM
     #15846
    When the computer restart and claymore dual start, GPU0 have 30mh and the others GPU have 26MH! If i close claymore and start again the .bat file, all the GPU have 30mh!
    Why is that ? Is a bug in claymore 10.0 ?
    Tested in win 10 32 bit with rx580 8gb and 4gb, all the rigs make the same problem and need to close miner and start again!

  • slazarov
    Newbie
    *
    Offline Offline

    Activity: 8
    Merit: 0


    View Profile
    September 04, 2017, 08:45:22 PM
     #15847
    Hello,

    I am mining ETH+DCR using 1070@384.94 NVIDIA drivers on Win10 Creators Update.
    I have noticed that people get much higher DCR hash rate than what I am getting.
    Mine seems to be capped to the ETH hash rate.

    Here is a snapshot of the log without any overclock (100%/0/0):
    Quote
    23:37:39:900   fdc   ETH - Total Speed: 209.768 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:04
    23:37:39:915   fdc   ETH: GPU0 26.021 Mh/s, GPU1 25.878 Mh/s, GPU2 25.980 Mh/s, GPU3 27.873 Mh/s, GPU4 25.981 Mh/s, GPU5 25.984 Mh/s, GPU6 26.009 Mh/s, GPU7 26.041 Mh/s
    23:37:39:915   fdc    DCR - Total Speed: 2097.676 Mh/s, Total Shares: 29, Rejected: 0
    23:37:39:915   fdc    DCR: GPU0 260.210 Mh/s, GPU1 258.776 Mh/s, GPU2 259.802 Mh/s, GPU3 278.734 Mh/s, GPU4 259.813 Mh/s, GPU5 259.838 Mh/s, GPU6 260.093 Mh/s, GPU7 260.410 Mh/s

    This is my start.bat:
    Quote
    EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal wallet.user/email -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal userName.worker -dpsw x -platform 2

    Please advise.

  • Skol600ml
    Full Member
    ***
    Offline Offline

    Activity: 158
    Merit: 100


    View Profile
    September 04, 2017, 09:11:54 PM
     #15848
    Quote from: slazarov on September 04, 2017, 08:45:22 PM
    Hello,

    I am mining ETH+DCR using 1070@384.94 NVIDIA drivers on Win10 Creators Update.
    I have noticed that people get much higher DCR hash rate than what I am getting.
    Mine seems to be capped to the ETH hash rate.

    Here is a snapshot of the log without any overclock (100%/0/0):
    Quote
    23:37:39:900   fdc   ETH - Total Speed: 209.768 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:04
    23:37:39:915   fdc   ETH: GPU0 26.021 Mh/s, GPU1 25.878 Mh/s, GPU2 25.980 Mh/s, GPU3 27.873 Mh/s, GPU4 25.981 Mh/s, GPU5 25.984 Mh/s, GPU6 26.009 Mh/s, GPU7 26.041 Mh/s
    23:37:39:915   fdc    DCR - Total Speed: 2097.676 Mh/s, Total Shares: 29, Rejected: 0
    23:37:39:915   fdc    DCR: GPU0 260.210 Mh/s, GPU1 258.776 Mh/s, GPU2 259.802 Mh/s, GPU3 278.734 Mh/s, GPU4 259.813 Mh/s, GPU5 259.838 Mh/s, GPU6 260.093 Mh/s, GPU7 260.410 Mh/s

    This is my start.bat:
    Quote
    EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal wallet.user/email -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal userName.worker -dpsw x -platform 2

    Please advise.


    No information about overclock or powerlimit. You need that for best performance.
    Try -dcri 75 (or near)

    Expect to GTX 1070 do 29.5 730 @ 150w

    pl 75%
    +200
    +650

  • ascaloon
    Newbie
    *
    Offline Offline

    Activity: 36
    Merit: 0


    View Profile
    September 04, 2017, 09:32:23 PM
     #15849
    Quote from: Evan on September 04, 2017, 04:00:14 PM
    Quote from: sir4o on September 04, 2017, 03:54:49 PM
    Quote from: Evan on September 04, 2017, 03:30:00 PM
    Okay all m y cards are hynix so I can OC them a bit? My screen for timing looks nothing like his.

    Seems wrong version of PBE, you need to find one which display the timings properly... did you try the one in the article I've sent earlier?
    ...and always 'Run As admin'....

    Yea Ia m using Polaris Bios editor 1.4 and atiwinflash

    You need this hacked one for rx 5xx series. This version can properly read your VRAM.
    https://drive.google.com/open?id=0BxvfcjcsbYTwVFM1anRSSk9iaTQ

  • fredeq
    Legendary
    *
    Offline Offline

    Activity: 1536
    Merit: 1005


    View Profile WWW
    September 04, 2017, 10:03:26 PM
     #15850
    Quote from: johndoe2 on September 04, 2017, 06:46:48 PM
    How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.

    You need to make one of your Furys a main card.
    Main slot + plug monitor.
    https://whattomine.com - Check what to mine Smiley

  • Evan
    Hero Member
    *****
    Offline Offline

    Activity: 507
    Merit: 500



    View Profile
    September 04, 2017, 11:38:38 PM
     #15851
    Quote from: fredeq on September 04, 2017, 10:03:26 PM
    Quote from: johndoe2 on September 04, 2017, 06:46:48 PM
    How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.

    You need to make one of your Furys a main card.
    Main slot + plug monitor.

    I didnt have to. try MSi After burner 4.4 beta 16
    I am poor, but i do work for Coin Smiley
    1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM

  • Andrey123
    Sr. Member
    ****
    Offline Offline

    Activity: 1848
    Merit: 305



    View Profile
    September 05, 2017, 12:12:33 AM
     #15852
    Guys help!
    I put a new riser, worked the card for three hours, and again showed 511 degrees (
    The driver installed through the Task Manager.
    The latest from AMD, corrected for mining.
    Earlier there were versions 16.9.2 such problem was not.
    He put version 17, Wattman was built in, and he was in conflict with MSI berner.

    Is it really worth it in these drivers?
    Windows did not find anything.

    How to overclock the cards without MSI berner?
    I already panic (
    Three days the card is idle, I can not find a solution to the problem (

    Could not the card break?
    Hello! Voluntary donations that will go towards the development of my coin.
    34bwEhH3GMx6swYXt2NBfFbYGkdTcaWtXz....BTC

  • Raja_MBZ
    Legendary
    *
    Offline Offline

    Activity: 1806
    Merit: 1520



    View Profile
    September 05, 2017, 12:16:57 AM
     #15853
    Has some around used Halnziye thermal paste for their GPU's? How good is it?

  • SummersideGuy
    Sr. Member
    ****
    Offline Offline

    Activity: 518
    Merit: 250


    I am a meat Popsicle


    View Profile
    September 05, 2017, 12:26:25 AM
     #15854
    Quote from: orgon3 on September 05, 2017, 12:21:47 AM
    These days, does mining ethereum need >2GB vram or just 2GB Vram?
    greater then 2GB

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    September 05, 2017, 12:57:57 AM
     #15855
    The latest version of Polaris Bios Editor v1.6 from jaschaknack makes it simple to apply the right performance timings for your card. With the 'One click timing patch' option it will apply the bundled performance strap to the correct timings. I tried it with several brands of RX 570/580with Hynix, Elpidia and Samsung memory and they all now get 29 M/s+ stable. Much better than randomly copying timings from the diffrent straps. Some cards like the Sapphire Nitro+ have two diffrent sets of straps from diffrent brands of memory and PBE will corretly detect and apply the right strap to the right timing. Great update!

    https://github.com/jaschaknack/PolarisBiosEditor

  • SummersideGuy
    Sr. Member
    ****
    Offline Offline

    Activity: 518
    Merit: 250


    I am a meat Popsicle


    View Profile
    September 05, 2017, 02:14:35 AM
     #15856
    Quote from: Vann on September 05, 2017, 12:57:57 AM
    The latest version of Polaris Bios Editor v1.6 from jaschaknack makes it simple to apply the right performance timings for your card. With the 'One click timing patch' option it will apply the bundled performance strap to the correct timings. I tried it with several brands of RX 570/580with Hynix, Elpidia and Samsung memory and they all now get 29 M/s+ stable. Much better than randomly copying timings from the diffrent straps. Some cards like the Sapphire Nitro+ have two diffrent sets of straps from diffrent brands of memory and PBE will corretly detect and apply the right strap to the right timing. Great update!

    https://github.com/jaschaknack/PolarisBiosEditor

    Going to try this out now

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    September 05, 2017, 02:34:11 AM
     #15857
    Quote from: SummersideGuy on September 05, 2017, 02:14:35 AM
    Quote from: Vann on September 05, 2017, 12:57:57 AM
    The latest version of Polaris Bios Editor v1.6 from jaschaknack makes it simple to apply the right performance timings for your card. With the 'One click timing patch' option it will apply the bundled performance strap to the correct timings. I tried it with several brands of RX 570/580with Hynix, Elpidia and Samsung memory and they all now get 29 M/s+ stable. Much better than randomly copying timings from the diffrent straps. Some cards like the Sapphire Nitro+ have two diffrent sets of straps from diffrent brands of memory and PBE will corretly detect and apply the right strap to the right timing. Great update!

    https://github.com/jaschaknack/PolarisBiosEditor

    Going to try this out now

    Remember to save the Bios after it's patched Smiley

  • yonton
    Sr. Member
    ****
    Offline Offline

    Activity: 868
    Merit: 262



    View Profile
    September 05, 2017, 03:42:05 AM
     #15858
    I get error 43 after flashing straps with atiwinflash. Is it true that I need pixel patcher to solve the bios signature check?

  • YIz
    Hero Member
    *****
    Offline Offline

    Activity: 700
    Merit: 502


    WOLFBET.COM - Exclusive VIP Rewards


    View Profile
    September 05, 2017, 03:44:48 AM
     #15859
    I'll update after I get my new shiny Vega. Hopefully, it improves the hashrate a bit.

    .WOLFBET....
    CRYPTO CASINO
    &     SPORTSBOOK
    ████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████
    		███████
    ███████████
    █████████████
    ██████████████
    ███████████████
    ████████████████
    ████████████████
    ████████████████
    ███████████████
    ███████████████
    ██████████████
    ████████████
    ████████████████    		|
    |    		|
    |    		|
    |


    ███████████████████
    █████████████████████████
    █████████████████████████████
     
    ████████████████████████████
    █████████████████████████
    █████████████████████
    █████████████████
    ███████████████
    ████████████
    ████████████████████████
    		▄▄▄▄▄▄▄▄▄▄▄▄▄▄

    EXCLUSIVE VIP
    REWARDS

    ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄

    ....PLAY NOW.

  • mengy
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    September 05, 2017, 04:15:46 AM
     #15860
    anyone having issues with Eth Mining + Sia (using rx vega)

    v9.8 works perfect, get around 36 Mhs and 900 Mh/s Sia.

    v10 works with ETH however SIA reports all shares rejected ?

    I'm using the same command line for both versions.

    EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal xxxx  -epsw x  -dpool stratum+tcp://asia.siamining.com:7777 -dwal yyyyyy -dcoin sia

    tried searching for others with same, but can't find any hits.

    Any ideas would be great ? currently rolled back to 9.8 as it mines flawlessly.
    Pages: « 1 ... 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 [793] 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 ... 1409 »
      Print  
Page 792
Viewing Page: 793

IRLBTC™ © 2025 IRLBTC.com