is the fan control working for you. I use the same combination FCU + 17.10.3 + v10.0 and one of my cards the fan just starts and stops randomly even though I set the minimal speed to be 1000 rpm in wattman. Another problem is the fan and temp settings in wattman would reset to default values if I restart the rig. It is weird because only one out of six cards showed the fan start/stop symptom.

Finally happy with latest 17.10.3 drivers (rigs are quite stable) with one exception - I use Claymore's settings for voltages and frequencies (not AfterBurner or something similar) and have to run it twice. This is because of low hashrate after first start for some cards - cards start with 23-25MH, but after stopping the miner and running it again they sdstart at normal rate. It is a clue for me.

FCU = Windows 10 Fall Creators Update

I found a small bug in last Claymore's Manager 3.5: some time later after app is minimised to tray, website shows some or all rigs in red colour like there's some fault, but all numbers are OK. if I restore manager from tray, rigs become black in browser. I guess something happens to a rig (e.g. hashrate drop), than it restores, but Manager "forgets" to reset warning status upon restoring from tray (or is it a feature to review faults??)

Yes, fan settings work fine if the cards are not NVIDIA. Try setting all:  -tstop -tt -fanmin -fanmax. Take a look at the miner's readme.txt file for details.

Ok, so I've nearly got there.

Claymore 10 is working better for me than 10.1. What I have now is a situation where voltages, clocks etc stay perfectly stable provided I use GPUz to monitor (hwinfo seems to reset voltages oddly).

So with 1150/2000 and 810 as my settings, I'm getting 29.7mhs and hovering around 100-110w per card. Great!

But there's a catch. I can only set these clocks in overdriveN tool, which is ok, but now I have to figure out how to set it that the profile is applied on startup

Are you using Win 10 FCU?

Got incorrect temperature 511, ignore

I can not find out which card caused this error. Can you add di number to that kind of log Claymore?

Thanks

I try run miner on ubuntu 16_04. But get error. I have install AMD APP SDK toopt/AMDAPPSDK-3.0

./ethdcrminer64
./ethdcrminer64: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory