I thought this problem with claymore's eth miner and ethermine.org was solved but again today (( eu server

constant dag regeneration ((
Anyone with the same problem?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal MYKEY.MYPC/MYEMAIL -epsw x -mode 1 -ftime 10 -wd 0 -ethi 7 -r 20

I use this but the miner just kills itself after everything between 5-60 minutes. I have tried this too, it seems to be a little bit more stable but still closing:
epsw x -mode 1 -ftime 10 -ethi 4 -wd 0 -r 40

I have uninstalled Malwarebytes antimalware, added exceptions to windows defender and set it inactive, made exceptions to Webroot security without results.
I have a GTX 970 black edition to start with. Computing mode, no difference when overclocked or standard clocked. My solution for the moment is to reboot the computer every 40 minutes and set it to autostart. Not very good but it will mine.

Any other ideas? I went from version 10.0 to 10.6 too without any better results.

Last lines in log 1
15:27:30:647   4044   parse packet: 38
15:27:30:648   4044   ETH: Authorized
15:27:30:649   4044   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

15:27:30:649   4044   remove first packet 243
15:27:30:650   4044   new buf size: 243
15:27:30:651   4044   parse packet: 242
15:27:30:652   4044   ETH: job changed
15:27:30:652   4044   new buf size: 0
15:27:30:698   4044   got 243 bytes
15:27:30:698   4044   buf: {"jsonrpc":"2.0","id":0,"result":["0x02abe34e119e825aa5230bb07216d337236d3cabdf042ebf57e573161e516d9b","0xb683d2a971567602a1931b76b9fb447dd5563f0e4ab5dd69250556e7c1c94783","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

15:27:30:699   4044   parse packet: 242
15:27:30:700   4044   ETH: job is the same
15:27:30:700   4044   new buf size: 0
15:27:30:720   21bc   Setting DAG epoch #167...
15:27:32:380   21bc   Setting DAG epoch #167 for GPU0
15:27:32:383   21bc   Create GPU buffer for GPU0


Last lines in log 2
15:27:12:034   3f84   parse packet: 242
15:27:12:035   3f84   ETH: job changed
15:27:12:035   3f84   new buf size: 0
15:27:12:036   3f84   ETH: 02/01/18-15:27:12 - New job from eth-eu1.nanopool.org:9999
15:27:12:037   3f84   target: 0x000000006df37f67 (diff: 10000MH), epoch 167(2.30GB)
15:27:12:127   3f84   ETH - Total Speed: 10.052 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04
15:27:12:297   3f84   ETH: GPU0 10.052 Mh/s
15:27:15:601   2fa0   em hbt: 0, fm hbt: 16,
15:27:15:603   2fa0   watchdog - thread 0 (gpu0), hb time 250
15:27:15:604   2fa0   watchdog - thread 1 (gpu0), hb time 78

The memory speed will not change in Afterburner, it stays pretty low on 3004MHz.
https://imgur.com/hnsi0RO

All mentions - purely arbitrary, purely theoretical calculations.
Solo mining:
Claymore takes 1%, you are left with 99% ETH PoW time (effort)
Ethermine pool takes 1% of your 99% ETH effort
Ideally, you should be left with 98%
Dual mining:
Claymore takes 2%, 98% left, can be truncated to 95% (dual gives more incorrect and stale shares)
Ethermine takes 1% of your 95%
You are left with ~94%
Siamining takes 3% of your Sia effort, Claymore takes none

PS:
1. Siacoin is not anymore viable for GPU mining (difficulty and net hashrate skyrocketed).
2. Luck factor makes the effective hashrate fluctuate 10-15% up and down.
3. For AMD RX, optimal dcri values can boost the ETH hashrate by 2-3%. However, incorrect share ratio tends to be about 1-2%, so it levels out.

This is your problem. Too high dual mining intensity crashes the GPUs.

I have a stable System with 13 cards

13 GPUs
370 MHs
GPU: 1100,1100,1150,1150,1250,1250,1150,1250,1150,1150,1150,1150,1100
Memory: 1900,1900,2000,2000,2150,2150,2000,2150,2000,2000,2000,2000,1900
Stage: 1
Undervolting: 880
1900 Watt

What is your setup in Claymore start.bat? Your GPUs?

Probably use the same config for the 3 GPUs is hanging.

Finally to I also contribute.
Claymore, thanks for this excellent treed and all members.
After my first month of mining, results are amazing.
No.1 rig - 6 GPU RX580-8 g
MB Gigabyte H110-D3a - Bios upgraded
No.2 rig - 5 GPU RX480-4 g
MB Asus Prime Z270 - Bios upgraded

On bouth
Ram 4 Gig
Win 10
After burner 440 beta 16
Claymore 10.2
Rig 1 - Drivers from August 2017
Rig 2 - Drivers RobinHood

Rig 1 - ETH 180-182 MH/s , PASC 1800 MH/s
Rig 2 - ETH 149 MH/s , PASC 1490 MH/s
dcri 10
Temp 48-55 C
Fun 80-90%
Undervolted
Still need to see my electric bill

Had a few problems, but after downclocking all its smooth.
Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.

Keep up good work Claymore

You could also buy a thingy like the smos guy who sells the simple rig resetter.  im sure there are other variations, but it just shorts your power pins remotelly.

WHAT I SHUT DOWNLOAD THE SOFTWARE FOR WINDOW 7
 

hello,

since SIA is not minable anymore due to ASIC miners, is it possible for the dev to switch the dual mining to other coins like XVG on blake2s for example?
or maybe implementing other algo compatible with Ethash dual mining?

any ideas?

thx


Ok, I read the CLaymore dev is working on 2 new algo for dual mining and should be out soon