<<  >> (p.973)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591489 times)

    • MrDeity
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    February 07, 2018, 01:44:47 PM
     #19441
    Quote from: MrDeity on February 06, 2018, 12:38:22 PM
    Quote from: MrDeity on February 05, 2018, 02:14:54 PM
    I have 3 GPUs (one Vega 64, two RX 580s) and I can only consistently keep the vega 64 and one RX580 connected after reboots.  I've checked the risers (they appear to be good).  I saw on youtube that sometimes the video cards don't work without them thinking that they have a video card attached so I have two monitors (or I can use the HDMI plugin that fakes a monitor).  I have an older MOBO that should have the appropriate requirements but as I mentioned earlier, sometime I can get the rig to see the third card but sometimes I can't. 

    Any suggestions?

    Bumped for reference to my next post...

  • mshordja
    Member
    **
    Offline Offline

    Activity: 145
    Merit: 10


    View Profile WWW
    February 07, 2018, 01:45:50 PM
     #19442
    any news about the new version? i am really exiting to see the next dual mine coin  Undecided

  • MrDeity
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    February 07, 2018, 01:54:23 PM
     #19443
    Quote from: Amkolino on February 06, 2018, 12:42:41 PM
    When the card is not accessible do you get a yellow triangle sign in your device manager (if you use windows 10 e.g.)?

    I hade some gtx 1070, they worked from time to time - then again they didn't.
    After some reboot they worked then they didnt etc..

    Replaced the card, everything fine.. :-(

    I do use Windows 10.  The card is powered up (I can see the lights on the card) but I don’t see it at all on the device manager.  

    If I disconnect one of the other cards, I can see it so I know the card is working but I’m having trouble getting all three to work at the same time.  

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    February 07, 2018, 02:25:10 PM
     #19444
    Quote from: mshordja on February 07, 2018, 01:45:50 PM
    any news about the new version? i am really exiting to see the next dual mine coin  Undecided

    I will release new version in 1-2 days.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • Ratledge
    Jr. Member
    *
    Offline Offline

    Activity: 84
    Merit: 1


    View Profile
    February 07, 2018, 02:28:36 PM
     #19445
    Quote from: Amkolino on February 07, 2018, 09:48:40 AM
    Quote from: valev1 on February 06, 2018, 04:02:49 PM
    increase your swap size with 10 or 20 GB

    What do you mean with SWAP Size? :-/

    Windows "Swap" file size = virtual memory settings in the control panel.  Look up "adjust virtual memory size" using Google for you OS (assumed to be Windows 10?) and follow the instructions to increase the amount of available disk space for memory swapping.

  • fr4nkthetank
    Legendary
    *
    Offline Offline

    Activity: 2294
    Merit: 1182


    Now the money is free, and so the people will be


    View Profile
    February 07, 2018, 02:30:44 PM
     #19446
    The suspense is killing me !  At the same time, I dont wish to upgrade all my rigs again... but progress is progress and we need more profits Smiley

  • mshordja
    Member
    **
    Offline Offline

    Activity: 145
    Merit: 10


    View Profile WWW
    February 07, 2018, 02:33:28 PM
     #19447
    Quote from: Claymore on February 07, 2018, 02:25:10 PM
    Quote from: mshordja on February 07, 2018, 01:45:50 PM
    any news about the new version? i am really exiting to see the next dual mine coin  Undecided

    I will release new version in 1-2 days.
    thanks for the reply  Grin

  • MaryAngela_Fantocci
    Sr. Member
    ****
    Offline Offline

    Activity: 462
    Merit: 252


    Buy/Sell crypto at BestChange


    View Profile
    February 07, 2018, 04:09:40 PM
     #19448
    So decred, sia and pascal already has asic's? What about pascal and coins on the same algo?
    .BEST.CHANGE..███████████████
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ███████████████
    		..BUY/ SELL CRYPTO..

  • Victorio
    Full Member
    ***
    Offline Offline

    Activity: 281
    Merit: 100



    View Profile
    February 07, 2018, 05:25:18 PM
     #19449
    Quote from: audioempire on February 06, 2018, 10:31:15 PM
    we want to make two rig for this time. one is located in czech republic and one in germany. We want to mine in dodopool. I check txt and there is different spec in each pool. What do u advice? Mine separate or its possible to mine together?
    Use the same miner commands for both rigs, except worker name:
    EthDcrMiner64.exe -epool stratum+tcp://etp.dodopool.com:8008 -ewal %EWAL% -eworker rigCZ -epsw x -allpools 1 -allcoins 1
    EthDcrMiner64.exe -epool stratum+tcp://etp.dodopool.com:8008 -ewal %EWAL% -eworker rigDE -epsw x -allpools 1 -allcoins 1
    OR
    Use the same epools.txt, modify just WORKER name:
    POOL: stratum+tcp://etp.dodopool.com:8008, WALLET: %EWAL%, WORKER: rigCZ, PSW: x, ESM: 0, ALLPOOLS: 1, ALLCOINS: 1
    POOL: stratum+tcp://etp.dodopool.com:8008, WALLET: %EWAL%, WORKER: rigDE, PSW: x, ESM: 0, ALLPOOLS: 1, ALLCOINS: 1

  • RYXES
    Member
    **
    Offline Offline

    Activity: 140
    Merit: 10

    Merit me or don't.


    View Profile
    February 07, 2018, 05:30:10 PM
     #19450
    Quote from: Claymore on February 07, 2018, 02:25:10 PM
    Quote from: mshordja on February 07, 2018, 01:45:50 PM
    any news about the new version? i am really exiting to see the next dual mine coin  Undecided

    I will release new version in 1-2 days.

    Exciting. Best I blow off the cob webs of my dual mining Reg's.
    Merit me or don't.

  • Xkeeper
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    February 07, 2018, 06:13:41 PM
    Last edit: February 07, 2018, 06:57:44 PM by Xkeeper
     #19451
    Hello

    I have flashed the bios on my Sapphire Nitro+ RX570 4GB under Windows and I'm getting 30MH stable with Claymores.

    But when I try same flashed card under Ubuntu I get only 21.2MH with Claymores

    Any Idea what I might be missing?
    I realy dont want to end up mining under windows.

    I'm running Xubuntu 16.04
    Kernel 4.10.0-28
    amdgpu-pro beta mining driver 17.40.3.12
    Claymores 10.6

  • Ratledge
    Jr. Member
    *
    Offline Offline

    Activity: 84
    Merit: 1


    View Profile
    February 07, 2018, 07:19:17 PM
     #19452
    Quote from: MaryAngela_Fantocci on February 07, 2018, 04:09:40 PM
    So decred, sia and pascal already has asic's? What about pascal and coins on the same algo?
    Those ASIC folks don't miss a beat: it would be rather silly of them to bake in support for any particular algo and not make it extensible.

    Bottom line: if one algo fits multiple coins, it's likely going to be eat up by ASICs.

  • hashestohashes
    Newbie
    *
    Offline Offline

    Activity: 63
    Merit: 0


    View Profile
    February 07, 2018, 08:55:06 PM
     #19453
    So, somewhere in these 1k pages, is the answer I need probably, sadly  google searches failed me. Each time the miner has to reload the DAG file (dev fee as an example) the gpu's show less VRAM, and won't load the dag, causing the miner to crash.

    I went -nofee to solve this, and obviously everyone loses here, but it's been running non stop since (long enough for it to fail if it was going to). Anyone have an obvious solution that's been stated 37 times in here and I failed to find it?

    I am thinking a parameter or something would work (besides nofee). Linux, Smos rx580s

  • Ratledge
    Jr. Member
    *
    Offline Offline

    Activity: 84
    Merit: 1


    View Profile
    February 07, 2018, 09:05:52 PM
    Merited by vapourminer (1)
     #19454
    "Overclocking resistant" graphics cards?

    I finally figured out exactly what the problem was with my shiny new Gigabyte GTX 1060 6GB "OC" card.

    It's always a good idea not to have more than one overclocking tool installed, but I suppose that I didn't look closely enough at software downloads for the new replacement video card? Their website doesn't seem to differentiate between the VGA Tool (for overclocking) and their Aorus graphics card software which I thought was simply a support and required load, but it turns out that it is simply a different style overclocking tool.

    Their basic (now v 1.25) version is a glitzy graphical tool with more bells and whistles, whereas the Aorus tool is more straightforward and easier to use - sort of. Your mileage will vary!

    Anyway, apparently having both of them installed causes them to fight over which has control over the overclocking - and neither wins. Frankly they both pretty much lose bumping the opposite tool in the head.

    Once I had removed both of them, I installed "nVidia Inspector", more or less a generic overclocking solution for nVidia cards sort of along the lines of CCC for the AMD cards.  I used the parameters that I knew worked well for this specific card, and now it is always mining at 18.7MHm/sec as opposed to the 14.8-MH/sec it ran out of the box.

    Just a little tuning and ended up with 18.8MH/s every time. I should note that Claymore Miner seems to be a little temperamental if you adjust the GPU clock while it is running, so use the tool to create a shortcut to your preferred settings, and add it to your START.BAT file.

    Now I will futz around and see if I can get back to 20+

  • HFman
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    February 07, 2018, 10:19:44 PM
     #19455
    Quote from: idontknowmining on February 06, 2018, 10:57:25 PM
    Odd situation.

    Have a rig with 3 x RX570 4GB.  Was getting 27Mh/s with Claymore 10.6.

    Had to change rig to different board and hard drive.  Board is the same, hard drive is slightly different (slower, but didn't think this mattered).
    Same amount or RAM *GB, same pagefile, 16GB, same divers, same version of windows but now only getting 20Mh/s.

    ANy ideas?  Really frustrated.

    Drivers version is the latest, 18.2 blockchain from amd site.
    Bios is modded the same
    "UberMix v3.1

    777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354"

    Card info:

    Radeon Software Version - 18.2.1
    Radeon Software Edition - Adrenalin
    Graphics Chipset - Radeon RX 570 Series
    Memory Size - 4096 MB
    Memory Type - GDDR5
    Core Clock - 1244 MHz
    Windows Version - Windows 10 (64 bit)
    System Memory - 8 GB
    CPU Type - Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz

    Radeon Settings Version - 2018.0131.1849.33856
    Driver Packaging Version - 17.50.17.03-180131a-323782E-RadeonSoftwareAdrenalin
    Provider - Advanced Micro Devices, Inc.
    2D Driver Version - 8.1.1.1634
    Direct3D® Version - 9.14.10.01316
    OpenGL® Version - 6.14.10.13506
    OpenCL™ Version - 23.20.15017.3010
    AMD Audio Driver Version - 10.0.1.6
    Vulkan™ Driver Version - 2.0.1
    Vulkan™ API Version - 1.0.65

    Graphics Card Manufacturer - Powered by AMD
    Graphics Chipset - Radeon RX 570 Series
    Device ID - 67DF
    Vendor ID - 1002
    SubSystem ID - 22F7
    SubSystem Vendor ID - 1458
    Revision ID - EF
    Bus Type - PCI Express 3.0
    Current Bus Settings - Not Available
    BIOS Version - 015.050.002.001
    BIOS Part Number - xxx-xxx-xxx
    BIOS Date - 2017/05/18 08:21
    Memory Size - 4096 MB
    Memory Type - GDDR5
    Memory Clock - 1750 MHz
    Core Clock - 1244 MHz
    Total Memory Bandwidth - 224 GByte/s
    Memory Bit Rate - 7.00 Gbps
    2D Driver File Path -REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0005

    TIA



    Sounds like you need still to change from graphics to compute :

    https://i0.wp.com/mining.help/wp-content/uploads/2018/01/ethereum_mining_windows_amd_settings_gpu_workload.jpg?w=1050&ssl=1

    What memory does your card have ? your hashrate is still quite low...

  • achalmersman
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    February 08, 2018, 02:29:00 AM
     #19456
    So my AMD rig updated to the latest Windows build and screwed my drivers up.  Downloaded the latest AMD drivers (18.2.1) and MSI Afterburner 4.4.0 and Claymore 10.6.  I cannot get afterburner to recognize the cards control the cards at all.  Is Afterburner not yet compatible with the latest drivers?  Didn't find anything via google searches

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    February 08, 2018, 02:34:54 AM
     #19457
    If you want to use the compute drivers, Afterburner will not work with the AMD Adrenaline drivers and multiple cards. Either use the Claymore config file to apply the overclock and undervolt settings at runtime, or use OverdriveNtool to create overclocking profiles for your cards as explained on www.mining.help.

    If you want to use Afterburner with multiple cards you need to use the AMD blockchain drivers and you are limited to 8 AMD cards. You still need to use the pixel patcher with RX 470/480 and 570 cards after installing the driver.

    Since you don't want Windows updating your drivers, I would disable drivers updates in Windows Update.

    gpedit ==> Computer Configuration ==> Administrative Templates ==> Windows Components ==> Windows Update and set 'Do not include drivers with Windows Update' to enabled.

  • Ursul0
    Sr. Member
    ****
    Offline Offline

    Activity: 857
    Merit: 262


    View Profile
    February 08, 2018, 08:02:01 AM
     #19458
    Quote from: Ratledge on February 07, 2018, 09:05:52 PM
    "Overclocking resistant" graphics cards?

    I finally figured out exactly what the problem was with my shiny new Gigabyte GTX 1060 6GB "OC" card.

    It's always a good idea not to have more than one overclocking tool installed, but I suppose that I didn't look closely enough at software downloads for the new replacement video card? Their website doesn't seem to differentiate between the VGA Tool (for overclocking) and their Aorus graphics card software which I thought was simply a support and required load, but it turns out that it is simply a different style overclocking tool.

    Their basic (now v 1.25) version is a glitzy graphical tool with more bells and whistles, whereas the Aorus tool is more straightforward and easier to use - sort of. Your mileage will vary!

    Anyway, apparently having both of them installed causes them to fight over which has control over the overclocking - and neither wins. Frankly they both pretty much lose bumping the opposite tool in the head.

    Once I had removed both of them, I installed "nVidia Inspector", more or less a generic overclocking solution for nVidia cards sort of along the lines of CCC for the AMD cards.  I used the parameters that I knew worked well for this specific card, and now it is always mining at 18.7MHm/sec as opposed to the 14.8-MH/sec it ran out of the box.

    Just a little tuning and ended up with 18.8MH/s every time. I should note that Claymore Miner seems to be a little temperamental if you adjust the GPU clock while it is running, so use the tool to create a shortcut to your preferred settings, and add it to your START.BAT file.

    Now I will futz around and see if I can get back to 20+

    I'm not entirely sure what's the meaning of your post, but 1060 should be stable at about 23-24MH with mem oc to +800-900

  • gglala
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    February 08, 2018, 10:37:34 AM
     #19459
    @claymore any advice on the below error?

    Quote from: gglala on February 05, 2018, 03:09:40 PM
    Dear all, need your advice on my new rig. I constantly get the following error message and the miner restarts itself, which is a good thing instead of just hanging and sit idle. This happens as short as 2 hours or up to 5 hours. Tried searching around but yet to find any solutions. Thanks.

    quote
    21:09:47:912   16b8   ETH: checking pool connection...
    21:09:47:991   16b8   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    21:09:48:288   16b8   got 243 bytes
    21:09:48:397   16b8   buf: {"jsonrpc":"2.0","id":0,"result":["0xfa97d85090728cba653f36496f8395cd4e120d4dfc4ebf62ef84ff8a1a83c70d","0xb683d2a971567602a1931b76b9fb447dd5563f0e4ab5dd69250556e7c1c94783","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

    21:09:48:491   16b8   parse packet: 242
    21:09:48:569   16b8   ETH: job is the same
    21:09:48:662   16b8   new buf size: 0
    21:09:51:397   18b8   ETH: put share nonce 31272c01dbf3959
    21:09:51:491   9b0   GPU 3, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:51:569   1b34   GPU 0, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:51:663   2a8   GPU 6, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:51:757   d18   GPU 4, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:51:835   226c   GPU 5, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:51:491   18b8   ETH round found 1 shares
    21:09:52:007   16b8   ETH: 02/05/18-21:09:51 - SHARE FOUND - (GPU 5)
    21:09:52:085   16b8   send: {"id":15,"method":"eth_submitWork","params":["0x031272c01dbf3959","0xfa97d85090728cba653f36496f8395cd4e120d4dfc4ebf62ef84ff8a1a83c70d","0xb1c8e687425ef63e31ab56f46f302ed8f5c949eba43483f0f118681f19b06c97"]}

    21:09:52:178   2d10   GPU 1, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:52:272   1e5c   GPU 7, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:52:350   9b0   GPU 3, GpuMiner kx failed 1
    21:09:52:429   1b34   GPU 0, GpuMiner kx failed 1
    21:09:52:522   2a8   GPU 6, GpuMiner kx failed 1
    21:09:52:600   d18   GPU 4, GpuMiner kx failed 1
    21:09:52:694   226c   GPU 5, GpuMiner kx failed 1
    21:09:52:772   16bc   GPU 2, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:52:866   2d10   GPU 1, GpuMiner kx failed 1
    21:09:52:944   1e5c   GPU 7, GpuMiner kx failed 1
    21:09:52:397   16b8   got 40 bytes
    21:09:53:116   16b8   buf: {"jsonrpc":"2.0","id":15,"result":true}

    21:09:53:194   16b8   parse packet: 39
    21:09:53:272   16b8   ETH: Share accepted (1094 ms)!

    21:09:53:366   16b8   new buf size: 0
    21:09:52:772   226c   Set global fail flag, failed GPU5
    21:09:53:522   16bc   GPU 2, GpuMiner kx failed 1
    21:09:52:944   2d10   Set global fail flag, failed GPU1
    21:09:53:022   1e5c   Set global fail flag, failed GPU7
    21:09:52:429   9b0   Set global fail flag, failed GPU3
    21:09:52:522   1b34   Set global fail flag, failed GPU0
    21:09:52:600   2a8   Set global fail flag, failed GPU6
    21:09:52:694   d18   Set global fail flag, failed GPU4
    21:09:54:116   18b8   GPU 5, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:54:194   226c   GPU 5 failed
    21:09:53:616   16bc   Set global fail flag, failed GPU2
    21:09:54:366   1984   GPU 1, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:54:460   2d10   GPU 1 failed
    21:09:54:538   2a7c   GPU 7, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:54:616   1e5c   GPU 7 failed
    21:09:54:710   20cc   GPU 3, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:54:788   9b0   GPU 3 failed
    21:09:54:882   208   GPU 0, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:54:960   1b34   GPU 0 failed
    21:09:55:038   28b8   GPU 6, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:55:132   2a8   GPU 6 failed
    21:09:55:210   2cb0   GPU 4, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:55:288   d18   GPU 4 failed
    21:09:55:382   18b8   GPU 5, GpuMiner kx failed 1
    21:09:55:460   2b90   GPU 2, GpuMiner cu_k03 failed 73, an illegal instruction was encountered
    21:09:55:538   16bc   GPU 2 failed
    21:09:55:632   1984   GPU 1, GpuMiner kx failed 1
    21:09:55:710   2a7c   GPU 7, GpuMiner kx failed 1
    21:09:55:804   20cc   GPU 3, GpuMiner kx failed 1
    21:09:55:882   208   GPU 0, GpuMiner kx failed 1
    21:09:55:976   28b8   GPU 6, GpuMiner kx failed 1
    21:09:56:054   2cb0   GPU 4, GpuMiner kx failed 1
    21:09:55:460   18b8   Set global fail flag, failed GPU5
    21:09:56:226   2b90   GPU 2, GpuMiner kx failed 1
    21:09:55:710   1984   Set global fail flag, failed GPU1
    21:09:55:804   2a7c   Set global fail flag, failed GPU7
    21:09:55:882   20cc   Set global fail flag, failed GPU3
    21:09:55:976   208   Set global fail flag, failed GPU0
    21:09:56:054   28b8   Set global fail flag, failed GPU6
    21:09:56:132   2cb0   Set global fail flag, failed GPU4
    21:09:56:820   18b8   GPU 5 failed
    21:09:56:304   2b90   Set global fail flag, failed GPU2
    21:09:56:991   1984   GPU 1 failed
    21:09:57:070   2a7c   GPU 7 failed
    21:09:57:148   20cc   GPU 3 failed
    21:09:57:242   208   GPU 0 failed
    21:09:57:320   28b8   GPU 6 failed
    21:09:57:398   2cb0   GPU 4 failed
    21:09:57:492   2b90   GPU 2 failed
    21:09:57:085   4fc   srv_thr cnt: 1, IP: 127.0.0.1
    21:09:57:648   4fc   recv: 60
    21:09:57:742   4fc   srv pck: 59
    21:09:57:835   4fc   srv bs: 0
    21:09:57:913   4fc   sent: 241
    21:09:57:929   16b8   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x00000000000000000000000000000000000000000000000000000000d2e3fbe7"]}

    21:09:58:085   1dcc   GPU0 t=51C fan=75%, GPU1 t=57C fan=75%, GPU2 t=56C fan=75%, GPU3 t=57C fan=74%, GPU4 t=52C fan=74%, GPU5 t=54C fan=75%, GPU6 t=57C fan=74%, GPU7 t=52C fan=74%
    21:09:58:101   16b8   ETH: checking pool connection...
    21:09:58:257   16b8   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    21:09:58:539   16b8   got 243 bytes
    21:09:58:617   16b8   buf: {"jsonrpc":"2.0","id":0,"result":["0xfa97d85090728cba653f36496f8395cd4e120d4dfc4ebf62ef84ff8a1a83c70d","0xb683d2a971567602a1931b76b9fb447dd5563f0e4ab5dd69250556e7c1c94783","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

    21:09:58:695   16b8   parse packet: 242
    21:09:58:789   16b8   ETH: job is the same
    21:09:58:867   16b8   new buf size: 0
    21:10:08:352   16b8   ETH: checking pool connection...
    21:10:08:430   16b8   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    21:10:08:727   16b8   got 243 bytes
    21:10:08:805   16b8   buf: {"jsonrpc":"2.0","id":0,"result":["0xfa97d85090728cba653f36496f8395cd4e120d4dfc4ebf62ef84ff8a1a83c70d","0xb683d2a971567602a1931b76b9fb447dd5563f0e4ab5dd69250556e7c1c94783","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

    21:10:08:883   16b8   parse packet: 242
    21:10:08:977   16b8   ETH: job is the same
    21:10:09:055   16b8   new buf size: 0
    21:10:09:102   ae0   got 484 bytes
    21:10:09:227   ae0   buf: {"method":"mining.notify","params":["7d5","0000000000000000000000000000000000000000000000000000000000000000","32AF0200CA02200042B6D71C8BDD83EB6DAB79713BCFCFF330C4AB5BA2BB7B7C02A30882B54E31E 62000CA1FF7B7804CE8BC3AFA0C5A7F7F72E372C30A3A3FFAC81563C67672781D2DFD40420F0000 00000002000200E02B0736","0FC510114C3C9EC4B844C4DFF39C4A2018F413126F58AF73F62D818C467355B7E3B0C44298FC1C1 49AFBF4C8996FB92427AE41E4649B934CA495991B7852B85500000000",[],"00000000","24000000","5a7857b0",true],"id":null}

    21:10:09:305   ae0   parse packet: 483
    21:10:09:383   ae0   new buf size: 0
    21:10:09:477   ae0    PASC: 02/05/18-21:10:09 - New job from pasc-asia1.nanopool.org:15555
    21:10:09:555   ae0   target: 0x000000000ffff000 (diff: 68GH)
    21:10:10:540   52c   em hbt: 16, dm hbt: 16, fm hbt: 78,
    21:10:10:618   52c   watchdog - thread 0 (gpu0), hb time 19266
    21:10:10:696   52c   watchdog - thread 1 (gpu0), hb time 19234
    21:10:10:790   52c   watchdog - thread 2 (gpu1), hb time 19328
    21:10:10:868   52c   watchdog - thread 3 (gpu1), hb time 19516
    21:10:10:962   52c   watchdog - thread 4 (gpu2), hb time 19594
    21:10:11:040   52c   watchdog - thread 5 (gpu2), hb time 19578
    21:10:11:118   52c   watchdog - thread 6 (gpu3), hb time 19750
    21:10:11:212   52c   watchdog - thread 7 (gpu3), hb time 19938
    21:10:11:290   52c   watchdog - thread 8 (gpu4), hb time 19953
    21:10:11:368   52c   watchdog - thread 9 (gpu4), hb time 19938
    21:10:11:446   52c   watchdog - thread 10 (gpu5), hb time 20125
    21:10:11:540   52c   watchdog - thread 11 (gpu5), hb time 19532
    21:10:11:618   52c   watchdog - thread 12 (gpu6), hb time 20188
    21:10:11:712   52c   watchdog - thread 13 (gpu6), hb time 20375
    21:10:11:790   52c   watchdog - thread 14 (gpu7), hb time 20328
    21:10:11:884   52c   watchdog - thread 15 (gpu7), hb time 20531
    21:10:11:962   52c   WATCHDOG: GPU error, you need to restart miner Sad
    21:10:15:056   52c   Restarting OK, exit...
    unquote

  • dollos
    Newbie
    *
    Offline Offline

    Activity: 30
    Merit: 0


    View Profile
    February 08, 2018, 11:26:08 AM
     #19460
    the above is because you have overclocked too much. startthe mem overclock at 100mhz run for a few days and see if this occurs and beleive me this will not happen . you need to find that one card that is moaning...
    Pages: « 1 ... 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 [973] 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 ... 1409 »
      Print  
Page 972
Viewing Page: 973

IRLBTC™ © 2025 IRLBTC.com