<<  >> (p.261)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591474 times)

    • ivanpop
    Newbie
    *
    Offline Offline

    Activity: 62
    Merit: 0


    View Profile
    August 25, 2016, 12:51:08 PM
     #5201
    They're not wrong. I mine and my PC is completely responsive, like it's not even mining. I can even play CS:GO while mining and I get decent FPS.

  • vapourminer
    Legendary
    *
    Offline Offline

    Activity: 4872
    Merit: 5327


    what is this "brake pedal" you speak of?


    View Profile
    August 25, 2016, 12:53:39 PM
    Last edit: August 25, 2016, 01:50:30 PM by vapourminer
     #5202
    Quote from: ivanpop on August 25, 2016, 12:51:08 PM
    They're not wrong. I mine and my PC is completely responsive, like it's not even mining. I can even play CS:GO while mining and I get decent FPS.

    same here. simpler games as in 2-3 year old AAA titles, movies, youtube etc all play well with stock settings. just the system and gpu fans may ramp up a bit. r9 390.

    EDIT: eth only

  • Tasty Potato
    Full Member
    ***
    Offline Offline

    Activity: 230
    Merit: 100



    View Profile
    August 25, 2016, 01:20:03 PM
     #5203
    Quote from: ivanpop on August 25, 2016, 12:51:08 PM
    They're not wrong. I mine and my PC is completely responsive, like it's not even mining. I can even play CS:GO while mining and I get decent FPS.
    I checked them with my PC, no help.

  • pwpwpw
    Hero Member
    *****
    Offline Offline

    Activity: 908
    Merit: 503



    View Profile
    August 25, 2016, 01:38:56 PM
     #5204
    My PC stutters while mining thats why I use -ethi 4 or even -ethi 1, lower hashrate but everything works fine. I doubt you can play games while mining at full speed, normally gpu usage is 99%+, with ethi 1 its 95%, that remaining 5% won't be enough for games. I'm using dcri 80 so maybe with dcri 20, you could play some games.
    .Byte.
    Smart payments made simple    		❱❱❱
       IT JUST WORKS   
    .
    ●⚫ ▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀  ⚫●
    		●⚫●❱❱  .TEXTCOIN. │ Sending Crypto To Email
    ❱❱  ICO Platform with KYC
    ❱❱  Risk-Free Conditional Smart Payments    		█████
    █████
    █████
    █████
    █████
    █████
    █████
    █▀ ▀█
     ▄█▄
    ██▀██
    ▀     ▄ ▀
    ▄███▄
    █████    		ANN THREAD
    TELEGRAM
    TWITTER    		MEDIUM
    SLACK
    REDDIT    		█████
    █████
    █████
    █████
    █████
    █████
    █████
    █▀ ▀█
     ▄█▄
    ██▀██
    ▀     ▄ ▀
    ▄███▄
    █████

  • xeridea
    Sr. Member
    ****
    Offline Offline

    Activity: 449
    Merit: 251


    View Profile WWW
    August 25, 2016, 02:27:18 PM
     #5205
    Quote from: Tasty Potato on August 25, 2016, 11:06:38 AM
    Guys, how to decrease GPU load or some other setting in order to use PC for other stuff (surfing, movies, etc)?  Huh

    I am using this code atm - ethdcrminer64.exe -epool coinotron.com:3344 -ewal X -esm 2 -epsw X -etha 0 -ethi 20 -estale 0 -allpools 1

    My GPU load is 99-100%, MCU load - 90-93%

    Is there a way to do it on the fly? Or do I have to ctrl+C the claymore miner all the time I want to run a change in command line code?

    P.S. I am running gtx 970 in P0 mode at ~3900MHz memory clock with ~19MH/s


    Default ethi is 8, lower is less load, you have it higher....  You can't change ethi or li on the fly (you can change dcri on the fly though...), but you could make 2 bat files...  I mine on 470s, I can run them full out dual mining, and not even notice while working, watching movies etc.  When had a 970 as display card though, it would lag the desktop while mining, not sure why the amd cards I have used don't lag.  I can even (accidentally) mine on my cheap dual core APU without lag.  If you have an APU, or Intel CPU with graphics, plug into that....
    Profitability over time charts for many GPUs - http://xeridea.us/charts

    BTC:  bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC:  LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth:  0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24

  • Alubert
    Full Member
    ***
    Offline Offline

    Activity: 164
    Merit: 100


    View Profile
    August 25, 2016, 03:59:15 PM
     #5206
    Quote from: xeridea on August 25, 2016, 02:27:18 PM
    Quote from: Tasty Potato on August 25, 2016, 11:06:38 AM
    Guys, how to decrease GPU load or some other setting in order to use PC for other stuff (surfing, movies, etc)?  Huh

    I am using this code atm - ethdcrminer64.exe -epool coinotron.com:3344 -ewal X -esm 2 -epsw X -etha 0 -ethi 20 -estale 0 -allpools 1

    My GPU load is 99-100%, MCU load - 90-93%

    Is there a way to do it on the fly? Or do I have to ctrl+C the claymore miner all the time I want to run a change in command line code?

    P.S. I am running gtx 970 in P0 mode at ~3900MHz memory clock with ~19MH/s


    Default ethi is 8, lower is less load, you have it higher....  You can't change ethi or li on the fly (you can change dcri on the fly though...), but you could make 2 bat files...  I mine on 470s, I can run them full out dual mining, and not even notice while working, watching movies etc.  When had a 970 as display card though, it would lag the desktop while mining, not sure why the amd cards I have used don't lag.  I can even (accidentally) mine on my cheap dual core APU without lag.  If you have an APU, or Intel CPU with graphics, plug into that....

    I use the old 7970 to mine Ethereum with the Claymore miners. It has quite big lag when it is used as the main display.

    I do not know why.

  • PovertyByte
    Sr. Member
    ****
    Offline Offline

    Activity: 420
    Merit: 250


    View Profile
    August 25, 2016, 04:33:21 PM
    Last edit: August 25, 2016, 05:58:50 PM by PovertyByte
     #5207
    Quote from: ocminer on August 25, 2016, 06:21:23 AM
    Quote from: PovertyByte on August 25, 2016, 05:23:44 AM
    I can't get DCR to mine. Based on what I do in the config, dpools, and start files I either get "DCR: Authorization failed" on startup with all my shares rejected or I just hash at 0 for DCR


    Try this:


    Claymore command for merged ETC + DCR:
    ethdcrminer64.exe -epool etc-eu.suprnova.cc:3333 -ewal suprnova.1 -epsw x -esm 3 -dpool dcr.suprnova.cc:2252 -dwal suprnova.1 -dpsw x -allpools 1


    Will make you mine ETC at first and DCR as second coin, both on suprnova, make sure you have an account and worker set up. (https://dcr.suprnova.cc)

    So I run this as my batch file with with exactly that as listed on the dcr.suprnova.cc page. Do I edit my wallet address over the "1" in the "-dwal suprnove.1"?

    Also it would seem that eth mining worked with my current ethermine.org in the batch file. I just want to make sure that it isn;t a necessity to run both of those on the suprnova pools.

    Do I just use suprnova.1 in the batch file and the decred wallet in the config? Far as suprnova I made a worker but I do not know what to do with that.

    edit:
    I think I get it. supernova.1 is supposed to be my pool username.workername. Figured it out while trying to get LBRY mining working. I read that there is improper fan and power controls for nvidia dual mining right now so I will get back to this later.

  • bensam1231
    Legendary
    *
    Offline Offline

    Activity: 1876
    Merit: 1024


    View Profile
    August 25, 2016, 04:46:33 PM
     #5208
    Quote from: doktor83 on August 25, 2016, 09:20:39 AM
    it allows the dev fee to be mined at some predefined pools

    As opposed to what? Disabling dev fee?
    I buy private Nvidia miners. Send information and/or inquiries to my PM box.

  • alevlaslo
    Hero Member
    *****
    Offline Offline

    Activity: 1988
    Merit: 593


    View Profile
    August 25, 2016, 05:06:28 PM
     #5209
    Coinotron pool has auto switch between ETH and ETC to more profit
    Sale the first NFT of the first foto

  • Tasty Potato
    Full Member
    ***
    Offline Offline

    Activity: 230
    Merit: 100



    View Profile
    August 25, 2016, 07:10:40 PM
     #5210
    Quote from: pwpwpw on August 25, 2016, 01:38:56 PM
    My PC stutters while mining thats why I use -ethi 4 or even -ethi 1, lower hashrate but everything works fine. I doubt you can play games while mining at full speed, normally gpu usage is 99%+, with ethi 1 its 95%, that remaining 5% won't be enough for games. I'm using dcri 80 so maybe with dcri 20, you could play some games.

    yes, thank you for your time and possible solutions in my issue, i got them nailed. Gaming is out of the question or else I need to drop hashrate even further.

  • Tasty Potato
    Full Member
    ***
    Offline Offline

    Activity: 230
    Merit: 100



    View Profile
    August 25, 2016, 07:46:02 PM
     #5211
    Quote from: xeridea on August 25, 2016, 02:27:18 PM
    Quote from: Tasty Potato on August 25, 2016, 11:06:38 AM
    Guys, how to decrease GPU load or some other setting in order to use PC for other stuff (surfing, movies, etc)?  Huh

    I am using this code atm - ethdcrminer64.exe -epool coinotron.com:3344 -ewal X -esm 2 -epsw X -etha 0 -ethi 20 -estale 0 -allpools 1

    My GPU load is 99-100%, MCU load - 90-93%

    Is there a way to do it on the fly? Or do I have to ctrl+C the claymore miner all the time I want to run a change in command line code?

    P.S. I am running gtx 970 in P0 mode at ~3900MHz memory clock with ~19MH/s


    Default ethi is 8, lower is less load, you have it higher....  You can't change ethi or li on the fly (you can change dcri on the fly though...), but you could make 2 bat files...  I mine on 470s, I can run them full out dual mining, and not even notice while working, watching movies etc.  When had a 970 as display card though, it would lag the desktop while mining, not sure why the amd cards I have used don't lag.  I can even (accidentally) mine on my cheap dual core APU without lag.  If you have an APU, or Intel CPU with graphics, plug into that....

    Thank you for your time and advice, I found solution with the help of the dev by using -li. That did a nice, fine and silky job ;]

  • clipto
    Member
    **
    Offline Offline

    Activity: 311
    Merit: 10


    View Profile
    August 25, 2016, 08:13:33 PM
     #5212
    Been playing with some of the more advanced features of the miner.
    Temp control, voltage control, etc.
    One of my 4 cards gives me this error, how to fix this?

    Failed to set new Power Control treshold for GPU #0

    del *_log.txt
    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xxxxxxxxxxx/MiningrigAMD -epsw x -dpool sia.suprnova.cc:7777 -dwal xxxx.gpu -dpsw x -dcoin sia -allpools 1 -powlim -18 -cvddc 1030 -tt -100 -ttdcr 80

    Card #0 = a AMD 280x by the way.
    Running at Crimson 16.3.2 driver by the way.

  • Tasty Potato
    Full Member
    ***
    Offline Offline

    Activity: 230
    Merit: 100



    View Profile
    August 25, 2016, 08:23:58 PM
     #5213
    Quote from: fidasx on August 25, 2016, 05:37:45 PM
    Quote from: Tasty Potato on August 25, 2016, 11:06:38 AM
    Guys, how to decrease GPU load or some other setting in order to use PC for other stuff (surfing, movies, etc)?  Huh

    I am using this code atm - ethdcrminer64.exe -epool coinotron.com:3344 -ewal X -esm 2 -epsw X -etha 0 -ethi 20 -estale 0 -allpools 1

    My GPU load is 99-100%, MCU load - 90-93%

    Is there a way to do it on the fly? Or do I have to ctrl+C the claymore miner all the time I want to run a change in command line code?

    P.S. I am running gtx 970 in P0 mode at ~3900MHz memory clock with ~19MH/s


    try -li 10  or more


    That's what did the trick, thank you, I got the same advice from the dev.

  • goofy73
    Member
    **
    Offline Offline

    Activity: 65
    Merit: 10


    View Profile
    August 25, 2016, 09:24:11 PM
     #5214
    Claymore, could you do some ethman modification: let ethman show "off" instead gpu temperature of those cards, wich was switched off by max temp reached or another reason

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    August 25, 2016, 09:30:22 PM
     #5215
    Quote from: goofy73 on August 25, 2016, 09:24:11 PM
    Claymore, could you do some ethman modification: let ethman show "off" instead gpu temperature of those cards, wich was switched off by max temp reached or another reason

    Ok, will be added in next update.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • mr.pacy.mf
    Jr. Member
    *
    Offline Offline

    Activity: 408
    Merit: 3


    View Profile
    August 25, 2016, 09:43:54 PM
     #5216
    to high power consumation on sia+eth  1215w vs 990w 4x390x  eth + sia vs eth solo 1055/1500 -100mv
    They say I act like I don't give a fuck...I tell them I'm not acting...It's just who I am...

  • nhando
    Full Member
    ***
    Offline Offline

    Activity: 196
    Merit: 100


    View Profile
    August 26, 2016, 12:11:01 AM
     #5217
    What are you guys getting hash rate wise for NVIDIA 1070 dual mining with SIA using Claymore?
    Just "Mining" my own business.

  • SwedishBTC
    Newbie
    *
    Offline Offline

    Activity: 34
    Merit: 0


    View Profile
    August 26, 2016, 01:11:38 AM
     #5218
    I am having a problem with one of my rigs it is crashing all the time (sometimes I have to disconnect the power to all GPUs, uninstall the onboard graphics, and then connect the power to all cards again before rebooting the PC to get the PC to boot, and sometimes I even get THREAD_STUCK_IN_DEVICE_DRIVER error message when trying to boot the PC), and I did find out that if I turn off GPU 5 it seems to work better and not crashing.
    I am running in Windows 10 x64 with Sappire Radeon RX 480, and I did try different drivers without any luck. And I got the same clock settings on all cards (I am running 4 more RX480 on another machine and that one did not crash one single time in over 3 weeks) This is how the logfile looks right before the crash if I run with GPU 5 on...


    02:27:22:161   11f0   ETH: GPU0 27.335 Mh/s, GPU1 27.361 Mh/s, GPU2 27.348 Mh/s, GPU3 27.288 Mh/s, GPU4 27.351 Mh/s, GPU5 0.000 Mh/s
    02:27:22:166   11f0    DCR - Total Speed: 2733.663 Mh/s, Total Shares: 319, Rejected: 4
    02:27:22:171   11f0    DCR: GPU0 546.709 Mh/s, GPU1 547.214 Mh/s, GPU2 546.966 Mh/s, GPU3 545.762 Mh/s, GPU4 547.012 Mh/s, GPU5 0.000 Mh/s
    02:27:22:446   ca0   DCR: weak share, skip
    02:27:23:291   6ac   DCR: weak share, skip
    02:27:23:761   408   GPU0 t=59C fan=44%, GPU1 t=84C fan=61%, GPU2 t=79C fan=53%, GPU3 t=79C fan=58%, GPU4 t=85C fan=61%, GPU5 t=85C fan=60%
    02:27:23:766   408   em hbt: 0, dm hbt: 0, fm hbt: 0,
    02:27:23:766   408   watchdog - thread 0, hb time 203
    02:27:23:771   408   watchdog - thread 1, hb time 94
    02:27:23:771   408   watchdog - thread 2, hb time 0
    02:27:23:771   408   watchdog - thread 3, hb time 125
    02:27:23:776   408   watchdog - thread 4, hb time 31
    02:27:23:776   408   watchdog - thread 5, hb time 141
    02:27:23:781   408   watchdog - thread 6, hb time 219
    02:27:23:781   408   watchdog - thread 7, hb time 110
    02:27:23:786   408   watchdog - thread 8, hb time 94
    02:27:23:786   408   watchdog - thread 9, hb time 203
    02:27:23:791   408   watchdog - thread 10, hb time 77656
    02:27:23:791   408   WATCHDOG: GPU 5 hangs in OpenCL call, exit
    02:27:23:796   408   watchdog - thread 11, hb time 77547
    02:27:23:801   408   WATCHDOG: GPU 5 hangs in OpenCL call, exit
    02:27:24:806   408   Restarting OK, exit...





    This is how my *.bat file looks

    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xMyEtherWalletAddress -epsw x -eworker miner2 -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal MyUsername.miner2 -dpsw MyPassword -dcri 40



    What can be wrong, any advice?

  • Vetal_inside
    Member
    **
    Offline Offline

    Activity: 78
    Merit: 10


    View Profile
    August 26, 2016, 01:22:31 AM
     #5219
    Hi Claymore!

    At first - seems that it some built-in temp hysteresis parameter, what was set to 4 degr. At example on my rig, when tt limit set to 65 degr., and temp reach this value, fan begin work on 100%. And it continue working on 100%, till temp downs to 61 degr. It would be fine, if there were active option for temp hysteresis, which user can set manually for better configuration rigs.
    And second: are you planning to add static interface, like cgminer or sgminer? When I looking on moving, from down to top, lines with different colours, I worry that I will get epileptic fit Grin. But seriously, moving lines is anachronism from standart ethminer. It's time to make normal static interface.

  • joaocha
    Full Member
    ***
    Offline Offline

    Activity: 254
    Merit: 100


    View Profile
    August 26, 2016, 01:30:33 AM
     #5220
    Quote from: Vetal_inside on August 26, 2016, 01:22:31 AM
    Hi Claymore!

    At first - seems that it some built-in temp hysteresis parameter, what was set to 4 degr. At example on my rig, when tt limit set to 65 degr., and temp reach this value, fan begin work on 100%. And it continue working on 100%, till temp downs to 61 degr. It would be fine, if there were active option for temp hysteresis, which user can set manually for better configuration rigs.
    And second: are you planning to add static interface, like cgminer or sgminer? When I looking on moving, from down to top, lines with different colours, I worry that I will get epileptic fit Grin. But seriously, moving lines is anachronism from standart ethminer. It's time to make normal static interface.

    Static interface would be nice!!!
    Pages: « 1 ... 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 [261] 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 ... 1409 »
      Print  
Page 260
Viewing Page: 261

IRLBTC™ © 2025 IRLBTC.com