ah nice neoscrypt miner for amd and nividia? can u put your link for the neoscrypt miner?

Thanks

It seems my signature is useless...

Ok I'm ready to burn my computer.  Someone please help me.  I have a R280X that runs Cryptonite at 485h/s and according to the charts should run Equihash around 290 h/s.  I'm running claymore 12.6 on Slushpool and when the miner starts it does 275h/s.  It then begins to throttle down in steps down to 145 h/s and sometimes lower.  I recently watch it go as low as 40 h/s before climbing back up to 145 h/s.
Does anybody know why the rates are so low, and also the -i and -il commands do nothing to the hashrate.
I'm running the "blockchain" drivers but had the same problem when running AMD 15.2.
Any ideas?
Bob

Then why does it run full guns 485 h/s when mining cryptonite ?  no problem there...only problem is equihash and claymore 12.6

I am also running a few 7970 aka 280x, @1050/1400 1110-1150mV (depends on the specific card) and making with a modded BIOS ~300+ Sol per card. If the -i setting does nothing, then something is wrong on your side, mine 280x' run stable with i 4.

05:02:01:565   27c4   args: -zpool eu1-zcash.flypool.org:3333 -zwal t1VCuQVrFwARzeg86PYPUdALYmCnnM8wCxZ -zpsw x -fanmin 90 -i 0 -mport 0 -old 1 -li 1

----


05:02:17:456   25bc   GPU #0: Tahiti
05:02:17:457   25bc   ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
05:02:17:458   25bc   ZEC: GPU0 0.000 H/s
05:02:17:458   25bc   Pool switches: ZEC - 0
05:02:17:460   25bc   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:17:461   25bc   
05:02:18:247   ea0   got 310 bytes
05:02:18:248   ea0   buf: {"id":null,"method":"mining.notify","params":["67a3c0c31735bc837a1b","04000000","ef41b2639b230a829b625e14f0e994985ab421089f8d4af053c6c80000000000","14c9a446220b05c4b0380e883d1fa0e7975149e545fb74267fcb2cde389a0d06","0000000000000000000000000000000000000000000000000000000000000000","6687b05a","59b00d1c",true]}

05:02:18:250   ea0   parse packet: 309
05:02:18:251   ea0   new buf size: 0
05:02:20:229   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:23:233   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:26:237   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:29:240   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:32:243   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)

Hello,
i have some trouble mining ZEC with Claymore.

My Rig contains 6 RX570 4GB and runs perfect with claymore and ETH or XMR.
Only ZEC doesnt work fine.

I tried all settings with -i -asm -li ....... but nothing helps me fix my hash power.

When i start the Miner not all GPU's boosts to full frequency some stay at ~600MHz Core normaly i fixed it to 1100/2000 and this runs fine on ETH and XMR.
Max Hash Power i get on my RX570 is about 240-260 an the cards who doesnt clock right only about 60-80.

System is Windows 10 with the AMD Blockchain Driver.

Has Anybody a Idea what I can do?