<<  >> (p.315)
    Author Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)  (Read 3839402 times)

    • yatta
    Member
    **
    Offline Offline

    Activity: 93
    Merit: 10


    View Profile
    November 30, 2016, 08:40:38 AM
     #6281
    Quote from: Hotmetal on November 29, 2016, 07:56:27 PM
    Quote from: yatta on November 29, 2016, 06:52:06 PM
    Only reasonable meter is wall.

    At the moment i'm testing 470x and 480x.
    480x doing 177sols with 110w.


    What is your 470's doing with undervolting?

    470 - 165
    480 - 180 at the moment Smiley
    2 cards in rig - 288W at wall.
    System eats 83-85.
    So cards eat about 105- 107w each.
    ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25

  • snakey
    Legendary
    *
    Offline Offline

    Activity: 1386
    Merit: 1001



    View Profile
    November 30, 2016, 09:04:35 AM
     #6282
    For some reason after installing v8 my fans seems to be working much harder and louder...Everyone said that they got better speeds but the same watts but mine seems to be pushing the fans harder.

    Any help would be appreciated.

    Thanks.

  • ivomm
    Legendary
    *
    Offline Offline

    Activity: 1917
    Merit: 3245


    All good things to those who wait


    View Profile
    November 30, 2016, 09:15:12 AM
     #6283
    Quote from: Altcoining on November 30, 2016, 08:06:55 AM
    Quote from: Marvell1 on November 30, 2016, 07:53:46 AM
    Anyone else dissapoint with the Nanopool ? Its paying consistently under what it should be for the h/s it displays by a good 15% and on top of that its not even showing the right h/s , its under by around 1000 h/s  for my 15000 h/s

    anyone seeing this as well ?
    Nano pool has always been like that.

    I second that. I compared Nanopool for ETH, ETC and ZEC with the following pools: dwarfpool for ETH, ethc.epool.io for ETC, flypool and coinmine for ZEC. I must say that nanopool was giving 5-10% less earnings compared to the other pools. I also noticed that dwarfpool was giving exactly the same profit as the calculator www.whattomine.com was showing both for ETH and XMR (with Claymore Cryptonight miner). I think that Nano is delibarately showing an incorrect hashrate. Only the profit tests can show the real picture.

  • Altcoining
    Full Member
    ***
    Offline Offline

    Activity: 138
    Merit: 100


    View Profile
    November 30, 2016, 09:23:51 AM
     #6284
    Quote from: ivomm on November 30, 2016, 09:15:12 AM
    Quote from: Altcoining on November 30, 2016, 08:06:55 AM
    Quote from: Marvell1 on November 30, 2016, 07:53:46 AM
    Anyone else dissapoint with the Nanopool ? Its paying consistently under what it should be for the h/s it displays by a good 15% and on top of that its not even showing the right h/s , its under by around 1000 h/s  for my 15000 h/s

    anyone seeing this as well ?
    Nano pool has always been like that.

    I second that. I compared Nanopool for ETH, ETC and ZEC with the following pools: dwarfpool for ETH, ethc.epool.io for ETC, flypool and coinmine for ZEC. I must say that nanopool was giving 5-10% less earnings compared to the other pools. I also noticed that dwarfpool was giving exactly the same profit as the calculator www.whattomine.com was showing both for ETH and XMR (with Claymore Cryptonight miner). I think that Nano is delibarately showing an incorrect hashrate. Only the profit tests can show the real picture.
    I've found the same as you, Dwarf has always been my favorite, it pays the best compared to every other ETH pool that I've used, I hope the same for ZEC.

    It looks like Dwarf is looking better


    19273   16-11-30, 09:04:58 (1 hour ago)   9.6370   immature
    19221   16-11-30, 06:31:59 (3 hours ago)   9.6111   immature
    19213   16-11-30, 06:17:45 (4 hours ago)   9.6070   confirmed
    19175   16-11-30, 04:22:59 (6 hours ago)   9.5880   confirmed
    19145   16-11-30, 03:10:21 (7 hours ago)   9.5730   confirmed

    finding new block every 4 hours or so now.

  • Kartoff
    Full Member
    ***
    Offline Offline

    Activity: 187
    Merit: 100


    View Profile
    November 30, 2016, 09:31:59 AM
     #6285
    Quote from: newklear on November 30, 2016, 08:15:19 AM
    Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

    WATCHDOG: GPU 2 hangs in OpenCL call, exit .

    After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem


    Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock


    There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

    Check extender of that card... Or just change it... I have similar problems with crappy extenders...

  • stoleyourburger
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    November 30, 2016, 09:44:42 AM
     #6286
    Quote from: newklear on November 30, 2016, 08:15:19 AM
    Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

    WATCHDOG: GPU 2 hangs in OpenCL call, exit .

    After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem


    Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock


    There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory
    Might be a bad riser.
    I had a situation when I opened a brand-new riser x16-x16 and used it for a while, everything was alright.
    After a while, I reconnected the riser several times and after that when system is idle, everything was ok, but when I turn a miner on - the GPU begins showing 0S/S, hangs and restarts the PC.
    Changing the riser helped... For a while, then some time passed and history repeated itself... Using x1-x16 riser in x16 slot helped me. I guess crappy risers were the problem. Ordered USB risers now, hope it will help.
    Hope my experience helps. Anyways, try this GPU without riser to make sure GPU is ok.

  • cryptomined
    Full Member
    ***
    Offline Offline

    Activity: 168
    Merit: 104



    View Profile WWW
    November 30, 2016, 09:46:09 AM
     #6287
    Quote from: stoleyourburger on November 30, 2016, 09:44:42 AM

    Might be a bad riser.

    or the riser is loose
    or .. are the lanes set to gen2?  is there a 16x configuration setup like 8x4x4x?
    definetly dont leave any of those settings on auto
    or the drivers are getting mixed up, might want to try DDU uninstall and reinstall drivers if nothing else works
    https://cryptomined.com

  • newklear
    Newbie
    *
    Offline Offline

    Activity: 8
    Merit: 0


    View Profile
    November 30, 2016, 09:49:44 AM
     #6288
    Quote from: cryptomined on November 30, 2016, 09:46:09 AM
    Quote from: stoleyourburger on November 30, 2016, 09:44:42 AM

    Might be a bad riser.

    or the riser is loose
    or .. are the lanes set to gen2?  is there a 16x configuration setup like 8x4x4x?
    definetly dont leave any of those settings on auto
    or the drivers are getting mixed up, might want to try DDU uninstall and reinstall drivers if nothing else works

    The lanes are set to gen2 yeah . I have gen 1 and gen 2 should i switch to gen1 ? Can you tell me more about this settings ? To be honest everything is stock and auto. It`s strange that everything works well for 30 mins sometimes 1 hour sometimes 2 hours than boom...i get that error and pc freezes ! Thank you for the helping response

  • z97rx470
    Newbie
    *
    Offline Offline

    Activity: 36
    Merit: 0


    View Profile
    November 30, 2016, 10:01:49 AM
     #6289
    Quote from: newklear on November 30, 2016, 08:15:19 AM
    Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

    WATCHDOG: GPU 2 hangs in OpenCL call, exit .

    After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem


    Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock


    There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

    I was just gonna post here because I'm having the same problem with my Rx 470s i'm running an msi z97 gaming 5 motherboard. The only thing that has worked for me so far is to keep rearranging the slot configuration and reinstalling the drivers multiple times (took me like 10 tries to get it stable) right now its running stable with 5 cards but I have 7 available and can't get the other two to work. I only have 4 working risers at the moment so I'm plugging in two of my gpus directly into the x16 slots (1st and last one) and risers on the remaining slots (constantly rearranging to get it working) somebody please help this is a nightmare. Keep getting this stupid atikmdag.sys has failed crap

    Have already tried everything that I could find on google including changing PCI to gen1 and gen 2, changing drivers, changed config to 8x4x4, etc

  • stoleyourburger
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    November 30, 2016, 10:02:44 AM
     #6290
    Quote from: newklear on November 30, 2016, 09:49:44 AM
    Quote from: cryptomined on November 30, 2016, 09:46:09 AM
    Quote from: stoleyourburger on November 30, 2016, 09:44:42 AM

    Might be a bad riser.

    or the riser is loose
    or .. are the lanes set to gen2?  is there a 16x configuration setup like 8x4x4x?
    definetly dont leave any of those settings on auto
    or the drivers are getting mixed up, might want to try DDU uninstall and reinstall drivers if nothing else works

    The lanes are set to gen2 yeah . I have gen 1 and gen 2 should i switch to gen1 ? Can you tell me more about this settings ? To be honest everything is stock and auto. It`s strange that everything works well for 30 mins sometimes 1 hour sometimes 2 hours than boom...i get that error and pc freezes ! Thank you for the helping response
    Mentioning a loose riser.. I had a 4 days uptime on one miner with x1-x16 risers. Then suddenly the miner froze, but I could ping the PC, though couldn't connect to it through RDP, Teamviewer or VNC... So when I got to my miner physically, I saw one riser loose, a couple millimeters out from the motherboard. I guess it could be bad riser + vibration (very strange, but that's my only guess) or maybe some ghost Smiley
    Seriously, I had a thought that riser was springly (elastic) and maybe because of environment (temp, vibration) it took itself a little out.

    Btw what gen1/gen2 you are talking about?

  • Klaasje
    Legendary
    *
    Offline Offline

    Activity: 1080
    Merit: 1000

    BTC - 14ZVqS5UGqhY77d5u9aUSW24ipRJ2g9wmm


    View Profile
    November 30, 2016, 10:09:09 AM
     #6291
    Quote from: newklear on November 30, 2016, 08:15:19 AM
    Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

    WATCHDOG: GPU 2 hangs in OpenCL call, exit .

    After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem


    Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock


    There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

    i had the same problem changed my RAM memory all fixed Cheesy
    Bitcoin - 14ZVqS5UGqhY77d5u9aUSW24ipRJ2g9wmm

  • z97rx470
    Newbie
    *
    Offline Offline

    Activity: 36
    Merit: 0


    View Profile
    November 30, 2016, 10:13:07 AM
    Last edit: November 30, 2016, 10:25:37 AM by z97rx470
     #6292
    Quote from: Klaasje on November 30, 2016, 10:09:09 AM
    Quote from: newklear on November 30, 2016, 08:15:19 AM
    Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :

    WATCHDOG: GPU 2 hangs in OpenCL call, exit .

    After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem


    Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock


    There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory

    i had the same problem changed my RAM memory all fixed Cheesy

    Thanks for the tip will try tomorrow

  • dzonikg28
    Hero Member
    *****
    Offline Offline

    Activity: 1288
    Merit: 508


    View Profile
    November 30, 2016, 10:56:00 AM
     #6293
    IS GPY  allready dead for this coin
    http://www.ufominers.com/zcash-equinox

  • Altcoining
    Full Member
    ***
    Offline Offline

    Activity: 138
    Merit: 100


    View Profile
    November 30, 2016, 11:06:14 AM
     #6294
    Quote from: dzonikg28 on November 30, 2016, 10:56:00 AM
    IS GPY  allready dead for this coin
    http://www.ufominers.com/zcash-equinox

    Hashing Speed: 900H/s
    Hashing Algorithm: Equihash
    Power Consumption: 980 Watts

    That's 1.1 watts per S/s, that is extremely high...

  • Ursul0
    Sr. Member
    ****
    Offline Offline

    Activity: 857
    Merit: 262


    View Profile
    November 30, 2016, 11:08:23 AM
     #6295
    Quote from: dzonikg28 on November 30, 2016, 10:56:00 AM
    IS GPY  allready dead for this coin
    http://www.ufominers.com/zcash-equinox
    looks like bs to me.
    also do the calculations - 900H/s = 5*rx480, 120W*5 = 600W, 250$*5 = 1250$...
    WHY?Huh

  • dzonikg28
    Hero Member
    *****
    Offline Offline

    Activity: 1288
    Merit: 508


    View Profile
    November 30, 2016, 11:17:21 AM
     #6296
    Yes but its just first ..remeber for LTC..first ASIC were laughable but then in just few months ASIC evolved and made GPYs obsolete

  • Hotmetal
    Sr. Member
    ****
    Offline Offline

    Activity: 378
    Merit: 250


    View Profile
    November 30, 2016, 11:25:55 AM
     #6297
    Quote from: dzonikg28 on November 30, 2016, 11:17:21 AM
    Yes but its just first ..remeber for LTC..first ASIC were laughable but then in just few months ASIC evolved and made GPYs obsolete

    Don't count on that happening any time soon. ETH mining has been around forever and it doesn't have a ASIC for it.

    Edit: looks like i was wrong

  • Masked_Immortal
    Member
    **
    Offline Offline

    Activity: 67
    Merit: 10


    View Profile
    November 30, 2016, 11:27:15 AM
     #6298
    Quote from: dzonikg28 on November 30, 2016, 10:56:00 AM
    IS GPY  allready dead for this coin
    http://www.ufominers.com/zcash-equinox

    they also offer eth miner, look at their product pictures
    it seems it has dvd rom and floppy drive also, good Grin
    SCAVO  Technologies
    SELF-SUSTAINING CRYPTO MINING FARM  BY USING RENEWABLE ENERGY RESOURCES - LIFETIME CONTRACT
    ────────  Whitepaper ⬝  Twitter ⬝  Telegram ⬝   Facebook ⬝  Ann Thread     ───────  Join our ICO:  July. 15- Oct. 31

  • Kimax
    Newbie
    *
    Offline Offline

    Activity: 33
    Merit: 0


    View Profile
    November 30, 2016, 11:29:19 AM
     #6299
    Quote from: Ursul0 on November 30, 2016, 11:08:23 AM
    Quote from: dzonikg28 on November 30, 2016, 10:56:00 AM
    IS GPY  allready dead for this coin
    http://www.ufominers.com/zcash-equinox
    looks like bs to me.
    also do the calculations - 900H/s = 5*rx480, 120W*5 = 600W, 250$*5 = 1250$...
    WHY?Huh

    A single Radeon Pro Duo produce 1000 H/s and uses 300W

    It cost about 1200 USD here in Denmark

  • wulfgar_1979
    Newbie
    *
    Offline Offline

    Activity: 30
    Merit: 0


    View Profile
    November 30, 2016, 11:37:42 AM
     #6300
    please don't stop development!!!
    Pages: « 1 ... 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 [315] 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 ... 759 »
      Print  
Page 314
Viewing Page: 315

IRLBTC™ © 2025 IRLBTC.com