Does this work on win 7? I have no problems with my win 10 machine with 5 1070s, but I recently put together a win 7 machine with 2 g1 1070s and I always get thread exited with code 30 or 77 or 46 or a driver crash, have tried last 2 nvidia drivers with same results and all solvers, won't run with a powerlimit less than 100, crashes even at 99

wtf, how are you guys getting 120w with 1070, no matter what I try, I cant get that low of a reading (at wall).
My comp idles at around 80w, (1070 and 970). I use MSI afterburner, I have to cut power to -50% for both cards to get around 300w total consumption,
which is around 100w per card, then sols are at just 530 vs. 700+ with full OC (0.3.0b).

I found a sweet spot @ 650 sols and 380w @ wall, but still I cant get near your power consumption numbers...

Your mem is too low and it has significant impact on Zcash. Overclock it.-

Weird thing is, if I set only power limit to 75% with core 1800, mem 4300 it stays around 430 sols. To undervolt using MSI curve editor using same clocks but only lower fixed voltage it backs down to 375 sols. How can i undervolt that damn thing to stay @ 430 sols ?

You better watch your mouth with your non-topic comment otherwise you will suffer the wrath of ioglnx 

I assumed that NiceHash would keep up with their GUI miner and I was thrown off by the reported hash rate for a 1070 stated in the OP

I am getting 470-475 Sol/sec average on one of my 2 1070's and this is the crappy one at that



I would usually flip between NiceHash ZEC and EWBF ZCL for holding based on when the NiceHash exchange rate is within normal mining profitability or when they are shorting me in the earnings projection on the GUI. Thing is I can't make EWBF miner read in the NiceHash GUI if I were to use this for ZEC dumping

Seems like by calculations I make 2 dollars a month more by using EWBF even after factoring both the dev fee and the pool/exchange fee.

Wth, how are you getting 470+ on 1070?
Which brand do you have? Which settings? I can get like 420-430 at most with my KFA2 card.

MSI GTX 1070  465 S/s core +245 mem +490
                     445 S/s if i reduce power to 60 %

I think the KFA2 is already maxed OCed out of the box. Just my opinion.

Yep that OS is promising.

It's a 1070 FTW purchased a week before that iCX cooler and FTW2 edition got released (I bought at a bad time no special sale even) that ranges from 460 to 480 Sol/s at 1999-2020mhz core and just +575 on memory

This is actually high?

I need to test my other one that clocks way higher. I am setting up that computer now for it


I can't get this to mine for NiceHash so I am only mining and holding ZCL for now. Is the file in the miner meant for NiceHash pool for actually mining ZEC and needs a ZEC address?



edit: my other one that hits 2126 and even 2150mhz stable on OV with Samsung memory is making 490 Sol/s without OV

edit2: when putting the power limit to 50% this does not get me any more than the NiceHash GUI miner. Seems like EWBF only nets me more SOL/s when the power target is normal or all the way up.