Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.67)

Author

Topic: [Guide] Dogie's Comprehensive ASICMiner Blade Setup (Read 581041 times)

Datelli

Newbie

Offline

Activity: 19
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 09, 2014, 06:46:27 PM
Last edit: February 09, 2014, 06:57:53 PM by Datelli

#1321

Thanks Dogie, let me try that. :-) However I dont have the "Switch clock" button on my config screen. Would "Update/restart" do as well?

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 09, 2014, 07:11:04 PM

#1322

Quote from: Datelli on February 09, 2014, 06:46:27 PM

Thanks Dogie, let me try that. :-) However I dont have the "Switch clock" button on my config screen. Would "Update/restart" do as well?

You won't on V2s, they can't be overclocked.

Datelli

Newbie

Offline

Activity: 19
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 09, 2014, 07:30:18 PM

#1323

I'm mining Dogy, all is set up now and in full working order. Thank you so much for your help. Really appriciated!

Michael

alwaysthirsty

Newbie

Offline

Activity: 13
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 09, 2014, 09:41:28 PM

#1324

Quote from: dogie on February 09, 2014, 06:26:28 PM

Quote from: alwaysthirsty on February 09, 2014, 06:22:14 PM

I need help guys, after hashinh for several days my cables at the molex splitters started melting. Huh

See the OP again, the recommendations is NOT to use a molex connector. Plenty of links and information there.

Thank you for all the hard work and effort you have put in the OP. Do you think that, cutting a 6pin connector would be sufficient to power 3 blades, as a replacement for the molex?

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 10, 2014, 07:21:49 AM

#1325

Quote from: alwaysthirsty on February 09, 2014, 09:41:28 PM

Quote from: dogie on February 09, 2014, 06:26:28 PM

Quote from: alwaysthirsty on February 09, 2014, 06:22:14 PM

I need help guys, after hashinh for several days my cables at the molex splitters started melting. Huh

See the OP again, the recommendations is NOT to use a molex connector. Plenty of links and information there.

It would power ONE. Remember you can use the 4 pin ATX mobo cable for one, and if you have am 8 pin you can power two with 2x4 pin.
Thank you for all the hard work and effort you have put in the OP. Do you think that, cutting a 6pin connector would be sufficient to power 3 blades, as a replacement for the molex?

alwaysthirsty

Newbie

Offline

Activity: 13
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 10, 2014, 01:03:05 PM
Last edit: February 10, 2014, 01:16:44 PM by alwaysthirsty

#1326

Quote from: dogie on February 10, 2014, 07:21:49 AM

Quote from: alwaysthirsty on February 09, 2014, 09:41:28 PM

Quote from: dogie on February 09, 2014, 06:26:28 PM

Quote from: alwaysthirsty on February 09, 2014, 06:22:14 PM

I need help guys, after hashinh for several days my cables at the molex splitters started melting. Huh

See the OP again, the recommendations is NOT to use a molex connector. Plenty of links and information there.

Thank you for the reply. The quote got messed up for some reason. The 6pin connect has 3 blacks 3 yellow wires, they wont be able to handle intensity of 3 blades?

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 10, 2014, 01:29:00 PM

#1327

Quote from: alwaysthirsty on February 10, 2014, 01:03:05 PM

Quote from: dogie on February 10, 2014, 07:21:49 AM

Quote from: alwaysthirsty on February 09, 2014, 09:41:28 PM

Quote from: dogie on February 09, 2014, 06:26:28 PM

Quote from: alwaysthirsty on February 09, 2014, 06:22:14 PM

I need help guys, after hashinh for several days my cables at the molex splitters started melting. Huh

See the OP again, the recommendations is NOT to use a molex connector. Plenty of links and information there.

Thank you for the reply. The quote got messed up for some reason. The 6pin connect has 3 blacks 3 yellow wires, they wont be able to handle intensity of 3 blades?

No. Each pair of yellow wires is only able to provide about 75W before it becomes dodgy. You're asking 360W from ~110W of cables.

alwaysthirsty

Newbie

Offline

Activity: 13
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 10, 2014, 02:01:13 PM

#1328

Quote from: dogie on February 10, 2014, 01:29:00 PM

Quote from: alwaysthirsty on February 10, 2014, 01:03:05 PM

Quote from: dogie on February 10, 2014, 07:21:49 AM

Quote from: alwaysthirsty on February 09, 2014, 09:41:28 PM

Quote from: dogie on February 09, 2014, 06:26:28 PM

Quote from: alwaysthirsty on February 09, 2014, 06:22:14 PM

I need help guys, after hashinh for several days my cables at the molex splitters started melting. Huh

See the OP again, the recommendations is NOT to use a molex connector. Plenty of links and information there.

Thank you for the reply. The quote got messed up for some reason. The 6pin connect has 3 blacks 3 yellow wires, they wont be able to handle intensity of 3 blades?

No. Each pair of yellow wires is only able to provide about 75W before it becomes dodgy. You're asking 360W from ~110W of cables.

Once again thank you for the clarification. I will buy you a beer if i manage to get something out of my horrible investment.

cc13

Newbie

Offline

Activity: 2
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 11, 2014, 07:11:38 AM

#1329

I've had my AM Blade running since November 29th. I just noticed today that it turned off at some point. I think it's the PSU although it does power on for about five to ten seconds, then just powers off. I know it's not the surge protector because I tested directly in the wall and also get the same behavior. Has anyone had one of the Corsair GS800 PSU's go bad on them?

Or should it not work at all if it is indeed a bad PSU?

Appreciate any pointers. Thanks.

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 11, 2014, 10:42:21 AM

#1330

Quote from: cc13 on February 11, 2014, 07:11:38 AM

Sounds dead to me. Get a PSU tester, they cost about $5 off amazon

ShiNoDaX

Newbie

Offline

Activity: 8
Merit: 0

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 12, 2014, 01:37:58 PM

#1331

i have asic blade 10.7 GHS i want mining in site www.cex.io -what do I do ?
how config menu (ASICMiner Blade Setup)
http://www13.0zz0.com/2014/02/12/13/266744422.jpg

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 12, 2014, 05:01:34 PM

#1332

Quote from: ShiNoDaX on February 12, 2014, 01:37:58 PM

i have asic blade 10.7 GHS i want mining in site www.cex.io -what do I do ?
how config menu (ASICMiner Blade Setup)

Make a script file to change the proxy's pool to cex.io's pool address. Information in the OP.

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 17, 2014, 02:14:24 AM

#1333

Quote from: J_Dubbs on January 12, 2014, 11:21:18 PM

Quick question about cooling...

I have 9 blades on a backplane, all are running fine and cooling seems good enough from what I can see. I have six 120mm CoolerMaster "Sickleflow" fans pushing air across in one direction (3 push and 3 pull).

I have a 10th blade ordered and I'm not sure the air will push across as well on the end, lighting sucks but the pic below might help illustrate.

my question: should I buy some of those aluminum adhesive heatsinks for the blade on order? Or can I get by without them? Obviously, it will occupy the slot on the end of the backplane.

I would suggest this cooling setup is insufficient, you'd need something as large as a box fan to use a sideways blow configuration. I've tested this myself in several different variants.

NL5

Newbie

Offline

Activity: 2
Merit: 0

Power Module

February 17, 2014, 04:48:18 PM

#1334

Where can I purchase a replacement power module for a v1 blade?

Thanks

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 18, 2014, 12:28:55 AM

#1335

Quote from: NL5 on February 17, 2014, 04:48:18 PM

Where can I purchase a replacement power module for a v1 blade?

Thanks

Contact your reseller, then friedcat. Its likely you can't, and it would cost more to ship round the world.

coinking

Legendary

Offline

Activity: 927
Merit: 1000

Re: [Guide] Comprehensive ASICMiner Blade Setup

February 20, 2014, 12:55:08 AM

#1336

Quote from: HellDiverUK on September 23, 2013, 08:22:40 AM

Run it at "Low" speed. If that works, and you get failures at "High" speed, then you need to crank up the voltage.

I have two Blades, one is perfectly stable at 1.15v, the other isn't so much and will need a bit more. The second one intermittently reboots, and some of the chips X out.

I'm running mine off a Corsair CX750 - I was using an older Zalman 1000W unit before which didn't seem to like running with no 5v/3.3v load. The new Corsair runs perfectly.

how did you hook it up to the blade? I have the same psu, did you need an adapter or did you strip the wires and use a molex adapter? I'm confused by this guide lol :[

.TeleX AI.

..Multicurrency Wallet & Exchange On Telegram..
▬▬▬ Get Ready For The Chatbot Revolution!.

.ICO begins on November 15^th..
Twitter Facebook Telegram Whitepaper

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 20, 2014, 11:19:53 PM

#1337

Quote from: coinking on February 20, 2014, 12:55:08 AM

Quote from: HellDiverUK on September 23, 2013, 08:22:40 AM

how did you hook it up to the blade? I have the same psu, did you need an adapter or did you strip the wires and use a molex adapter? I'm confused by this guide lol :[

Buy extenders and strip those. Then you don't have to damage your PSU

coinking

Legendary

Offline

Activity: 927
Merit: 1000

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 21, 2014, 12:27:23 AM

#1338

issues here with the setup

here are my config screenshots:
http://coinking.imgur.com/all/

mining.proxy doesn't stay open like it did at first (after I changed the info in properties to: C:\Users\myname\Downloads\mining_proxy.exe -o stratum+tcp://tea.coin-pool.org:3331 -u myun -p mypw

.TeleX AI.

..Multicurrency Wallet & Exchange On Telegram..
▬▬▬ Get Ready For The Chatbot Revolution!.

.ICO begins on November 15^th..
Twitter Facebook Telegram Whitepaper

dogie (OP)

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 21, 2014, 12:28:51 AM

#1339

Quote from: coinking on February 21, 2014, 12:27:23 AM

issues here with the setup

here are my config screenshots:
http://coinking.imgur.com/all/

coinking's images are not publicly available.

coinking

Legendary

Offline

Activity: 927
Merit: 1000

Re: [Guide] Dogie's Comprehensive ASICMiner Blade Setup

February 21, 2014, 12:30:35 AM

#1340

Quote from: dogie on February 21, 2014, 12:28:51 AM

Quote from: coinking on February 21, 2014, 12:27:23 AM

issues here with the setup

here are my config screenshots:
http://coinking.imgur.com/all/

coinking's images are not publicly available.

how about this?

http://coinking.imgur.com/all/

.TeleX AI.

..Multicurrency Wallet & Exchange On Telegram..
▬▬▬ Get Ready For The Chatbot Revolution!.

.ICO begins on November 15^th..
Twitter Facebook Telegram Whitepaper

Pages: « 1 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [67] 68 69 70 71 72 73 74 »

Page 66

Viewing Page: 67