I am getting 600 h/s with my RX 580 and currently i have 100 coins.
Should i hold them or exchange them?
What do you guys do with your coins?

Maybe your inestability beyond 2050 its because you have undervolted further than I am.

Currently in Afterburner I've set it up as -100mV core and -20% Power Limit to reach the 1400/2050 range
I don't know why, but despite that Claymore its telling me that the Hashrate it's 930H/s in the pool live stats, it says that I'm mining @ 700-800H/s
But when I use xmr-stak it says the same info in both the client and the pool. So I'm assuming that
a) Claymore has an incompatibility with the pool
b) Claymore it's outputing more H/s than it's actually hashing in my case

I would like to stick with xmr-stak because I feel it's way more stable more me in all sense.

At this moment with the 1400/2050 setup i'm getting 930H/s in Claymore and 860H/s in xmr-stak

But still under the 1KH/s that I would have liked to aim for (or at least 950H/s in XMR-Stak) or even I would be fine with a 900H/s in XMR-Stak but @1200/2050

So I don't know where the issue could be.
Which are your undervolt settings? Core Voltage mV and % Power Limit? (in the Bios I did change the memory voltage to 950mV, but not the core voltage settings)

This guy for example recommends the UberMix 3.1
https://anorak.tech/t/sapphire-rx580-8gb-samsung-memory-256kb/38522

I have 3 setups:
Ubermix 3.1: 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019
Ubermix 3.1.1 Version 1: 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3F88354019
Ubermix 3.1.1 Version 2: 777000000000000022CC1C00AD615C41C0590E152ECCA60B006007000B031420FA8900A00300000 010122F3FBA354019

Which is the best for my card? Im using the Ubermix 3.1.1 Version 1

Now when reducing with OverDriveNTool (with AB also happened similarly) only produces crashes when tweaking core clock, never memory clock.


You are using the same strap as me (3.1.1 version 1)

I've tested this config, 1200/2050 at 900mV and Claymore with -h 1020 (it's the best in all scenarios) and now I'm only getting 700h/s in Claymore and 650h/s in XMR
Best part is that after touching the mV with the ODT now even at 1400 with 1200mV i'm still getting those numbers (700/650h/s). I don't know what might be happening now (EDIT: I have rebooted and everything went back adequately)

Maybe it's a problem of the driver. Are you using the Blockchain Radeon Driver? I did not see any differences when using DDU and then the blockchain and now the 17.11, maybe are you using another version?

Of course.

i don't know what is wrong i was mining whole day with R9 270 having 430 H/s at hashparty pool and didn't get anything..
What is the best pool?

Why when mining monero rx480 hashes much better with 900h and rx580 hashes with 750h? Same setting and modded bioses and on etherium 580 is doing 30.5mgh and 480 is 29.5? What is going on?

Also, are there any pools that auto exchange electroneum?  Rather than having a wallet is it best to just mine direct to an exchange?  I am already mining monero through mining pool hub and have an account on Cryptopia.  i was just planning on copying all my monero mining configs and adjusting them to mine to monero instead.  If There isn't an autoexchange pool I will just mine direct to the exchange.

Seems AMD hashrates are more comparable without modded bios' on cryptonight. I would suggest trying to update drivers if possible

Driver for all is the bockchain one. Rx480 has samsung chips and rx580 have Hynix , but I doubt this is the issue. I saw in whattomine that they wrote for 480 870h and for rx580 680h, so obviously there is some difference, but what is it?  I have to ask Claymore!

I have the same question.  Electroneum.space offers an even higher difficulty. starting at 100,000 difficulty.  With 6x vegas I am not sure if I should be on the 7777 port or the higher one.