<<  >> (p.23)
    Author Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform)  (Read 827372 times)

    • gramma
    Full Member
    ***
    Offline Offline

    Activity: 194
    Merit: 100



    View Profile
    September 04, 2013, 03:01:45 AM
     #441
    Quote from: nwoolls on September 03, 2013, 11:22:33 PM

    The crashes should include call stacks (bunch of stuff on the command line). Can you use the .Debug.zip file and then copy & paste the full call stack of the crash? It should look similar to the others above posted by bronan.

    Does it write a log somewhere?  It appears that the exceptions are being written to the Mono terminal instance, but the window closes before I can do anything.  While MultiMiner is frozen before it crashes, I cannot switch to the Mono Runtime, not any other, window. Nothing is appearing in the window until the MultiMiner unfreezes and closes.

    This is for the debug version as well as the original.
    BTC: 1MrNRPo7p8DEyxn87c9BCGwrbatBQeCHc1

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 03:07:37 AM
     #442
    Quote from: purelithium on September 04, 2013, 01:17:56 AM
    I removed the CAP configuration and now it won't start mining at all... Same error pops up

    Edit: Forced a switch using "Quick Switch" mining again, but that seems like a pretty fatal error, whatever it is.

    Thanks! Got it reproduced. This seems to happen if you remove a coin that is currently selected within the grid on the main screen.

    This is due to one of the many changes made to allow MultiMiner to work with coins added manually (instead of requiring them to appear first on CoinChoose.com). Thanks for helping me catch it in prerelease!
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 03:08:56 AM
     #443
    Quote from: gramma on September 04, 2013, 03:01:45 AM
    Does it write a log somewhere?  It appears that the exceptions are being written to the Mono terminal instance, but the window closes before I can do anything.  While MultiMiner is frozen before it crashes, I cannot switch to the Mono Runtime, not any other, window. Nothing is appearing in the window until the MultiMiner unfreezes and closes.

    This is for the debug version as well as the original.

    Run the program from a terminal using Mono:

    Code:
    mono MultiMiner.Win.exe

    This way the terminal will not close and you will be left with the crash text.
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • gramma
    Full Member
    ***
    Offline Offline

    Activity: 194
    Merit: 100



    View Profile
    September 04, 2013, 03:53:10 AM
     #444
    Quote from: nwoolls on September 04, 2013, 03:08:56 AM

    Run the program from a terminal using Mono:

    Code:
    mono MultiMiner.Win.exe

    This way the terminal will not close and you will be left with the crash text.

    Here it is:

    Code:
    mom@laptopia:~/Downloads/MultiMiner-Debug-1.2.24$ mono MultiMiner.Win.exe

    Unhandled Exception: System.Exception: Miner keeps exiting after launching - retried 5 times. Exit code 1.
    Error: Unexpected extra commandline arguments
    Executable:usr/bin/bfgminer
    Arguments: -o -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100 -I D --scan-serial erupter:all -o stratum+tcp://stratum.d7.lt:3333 -u myUser -p myPassword -d 0 -d 1 -d 2 --api-listen --api-port 4028 --api-allow W:127.0.0.1, -T --disable-gpu
      at MultiMiner.Xgminer.Miner.EnsureProcessStarts (System.Diagnostics.Process process, System.Diagnostics.ProcessStartInfo startInfo) [0x00000] in <filename unknown>:0
      at MultiMiner.Xgminer.Miner.StartMinerProcess (System.String arguments, Boolean redirectOutput, Boolean ensureProcessStarts, System.String reason, Boolean startProcess) [0x00000] in <filename unknown>:0
      at MultiMiner.Xgminer.Miner.Launch (System.String reason) [0x00000] in <filename unknown>:0
      at MultiMiner.Engine.MiningEngine.LaunchMinerProcess (MultiMiner.Xgminer.MinerConfiguration minerConfiguration, System.String reason) [0x00000] in <filename unknown>:0
      at MultiMiner.Engine.MiningEngine.StartMining () [0x00000] in <filename unknown>:0
      at MultiMiner.Engine.MiningEngine.StartMining (MultiMiner.Engine.Configuration.EngineConfiguration engineConfiguration, System.Collections.Generic.List`1 devices, System.Collections.Generic.List`1 coinInformation) [0x00000] in <filename unknown>:0
      at MultiMiner.Win.MainForm.StartMining () [0x00000] in <filename unknown>:0
      at MultiMiner.Win.MainForm.startupMiningTimer_Tick (System.Object sender, System.EventArgs e) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Timer.OnTick (System.EventArgs e) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Timer.FireTick () [0x00000] in <filename unknown>:0
      at (wrapper remoting-invoke-with-check) System.Windows.Forms.Timer:FireTick ()
      at System.Windows.Forms.XplatUIX11.CheckTimers (System.Collections.ArrayList timers, DateTime now) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUIX11.UpdateMessageQueue (System.Windows.Forms.XEventQueue queue, Boolean allowIdle) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUIX11.UpdateMessageQueue (System.Windows.Forms.XEventQueue queue) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUIX11.GetMessage (System.Object queue_id, System.Windows.Forms.MSG& msg, IntPtr handle, Int32 wFilterMin, Int32 wFilterMax) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUI.GetMessage (System.Object queue_id, System.Windows.Forms.MSG& msg, IntPtr hWnd, Int32 wFilterMin, Int32 wFilterMax) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Application.RunLoop (Boolean Modal, System.Windows.Forms.ApplicationContext context) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Application.Run (System.Windows.Forms.ApplicationContext context) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Application.Run (System.Windows.Forms.Form mainForm) [0x00000] in <filename unknown>:0
      at MultiMiner.Win.Program.Main () [0x00000] in <filename unknown>:0
    [ERROR] FATAL UNHANDLED EXCEPTION: System.Exception: Miner keeps exiting after launching - retried 5 times. Exit code 1.
    Error: Unexpected extra commandline arguments
    Executable:usr/bin/bfgminer
    Arguments: -o -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100 -I D --scan-serial erupter:all -o stratum+tcp://stratum.d7.lt:3333 -u myUser -p myPassword -d 0 -d 1 -d 2 --api-listen --api-port 4028 --api-allow W:127.0.0.1, -T --disable-gpu
      at MultiMiner.Xgminer.Miner.EnsureProcessStarts (System.Diagnostics.Process process, System.Diagnostics.ProcessStartInfo startInfo) [0x00000] in <filename unknown>:0
      at MultiMiner.Xgminer.Miner.StartMinerProcess (System.String arguments, Boolean redirectOutput, Boolean ensureProcessStarts, System.String reason, Boolean startProcess) [0x00000] in <filename unknown>:0
      at MultiMiner.Xgminer.Miner.Launch (System.String reason) [0x00000] in <filename unknown>:0
      at MultiMiner.Engine.MiningEngine.LaunchMinerProcess (MultiMiner.Xgminer.MinerConfiguration minerConfiguration, System.String reason) [0x00000] in <filename unknown>:0
      at MultiMiner.Engine.MiningEngine.StartMining () [0x00000] in <filename unknown>:0
      at MultiMiner.Engine.MiningEngine.StartMining (MultiMiner.Engine.Configuration.EngineConfiguration engineConfiguration, System.Collections.Generic.List`1 devices, System.Collections.Generic.List`1 coinInformation) [0x00000] in <filename unknown>:0
      at MultiMiner.Win.MainForm.StartMining () [0x00000] in <filename unknown>:0
      at MultiMiner.Win.MainForm.startupMiningTimer_Tick (System.Object sender, System.EventArgs e) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Timer.OnTick (System.EventArgs e) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Timer.FireTick () [0x00000] in <filename unknown>:0
      at (wrapper remoting-invoke-with-check) System.Windows.Forms.Timer:FireTick ()
      at System.Windows.Forms.XplatUIX11.CheckTimers (System.Collections.ArrayList timers, DateTime now) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUIX11.UpdateMessageQueue (System.Windows.Forms.XEventQueue queue, Boolean allowIdle) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUIX11.UpdateMessageQueue (System.Windows.Forms.XEventQueue queue) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUIX11.GetMessage (System.Object queue_id, System.Windows.Forms.MSG& msg, IntPtr handle, Int32 wFilterMin, Int32 wFilterMax) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.XplatUI.GetMessage (System.Object queue_id, System.Windows.Forms.MSG& msg, IntPtr hWnd, Int32 wFilterMin, Int32 wFilterMax) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Application.RunLoop (Boolean Modal, System.Windows.Forms.ApplicationContext context) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Application.Run (System.Windows.Forms.ApplicationContext context) [0x00000] in <filename unknown>:0
      at System.Windows.Forms.Application.Run (System.Windows.Forms.Form mainForm) [0x00000] in <filename unknown>:0
      at MultiMiner.Win.Program.Main () [0x00000] in <filename unknown>:0
    mom@laptopia:~/Downloads/MultiMiner-Debug-1.2.24$
    BTC: 1MrNRPo7p8DEyxn87c9BCGwrbatBQeCHc1

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 04:03:57 AM
     #445
    Quote from: gramma on September 04, 2013, 03:53:10 AM
    Here it is:

    Code:
    mom@laptopia:~/Downloads/MultiMiner-Debug-1.2.24$ mono MultiMiner.Win.exe

    Unhandled Exception: System.Exception: Miner keeps exiting after launching - retried 5 times. Exit code 1.
    Error: Unexpected extra commandline arguments
    Executable:usr/bin/bfgminer
    Arguments: -o -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100 -I D --scan-serial erupter:all -o stratum+tcp://stratum.d7.lt:3333 -u myUser -p myPassword -d 0 -d 1 -d 2 --api-listen --api-port 4028 --api-allow W:127.0.0.1, -T --disable-gpu

    So here you can see that the following command is being run:

    Code:
    /usr/bin/bfgminer -o -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100 -I D --scan-serial erupter:all -o stratum+tcp://stratum.d7.lt:3333 -u myUser -p myPassword -d 0 -d 1 -d 2 --api-listen --api-port 4028 --api-allow W:127.0.0.1, -T --disable-gpu

    Resulting in the error:

    Code:
    Error: Unexpected extra commandline arguments

    If you run the above command in an open terminal you'll see the same error.

    The first thing I'd try is removing anything you've entered into the Settings or Coins dialogs for miner parameters. To me it looks like you've entered the following into one of the parameters settings:

    Code:
    -o -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100

    That should not be in there.
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • JeanCool
    Full Member
    ***
    Offline Offline

    Activity: 224
    Merit: 100


    School of Hard Knocks


    View Profile
    September 04, 2013, 07:29:22 AM
    Last edit: September 04, 2013, 08:20:36 AM by JeanCool
     #446
    ll worked fine until this morning. I updated client and after that the following msg appears (using cgminer on Win7)

    Code:
    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.

    ************** Exception Text **************
    System.InvalidOperationException: Sequence contains no matching element
       at System.Linq.Enumerable.Single[TSource](IEnumerable`1 source, Func`2 predicate)
       at MultiMiner.Win.MainForm.SaveGridValuesToConfiguration()
       at MultiMiner.Win.MainForm.SaveChanges()
       at MultiMiner.Win.MainForm.startButton_Click(Object sender, EventArgs e)
       at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
       at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
       at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
       at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ToolStrip.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


    ************** Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
    ----------------------------------------
    MultiMiner.Win
        Assembly Version: 1.2.25.0
        Win32 Version: 1.2.25
        CodeBase: file:///***/Local/MultiMiner/MultiMiner.Win.exe
    ----------------------------------------
    MultiMiner.Utility
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///***/Local/MultiMiner/MultiMiner.Utility.DLL
    ----------------------------------------
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    MultiMiner.Engine
        Assembly Version: 1.2.25.0
        Win32 Version: 1.2.25
        CodeBase: file:///***/Local/MultiMiner/MultiMiner.Engine.DLL
    ----------------------------------------
    MultiMiner.Xgminer
        Assembly Version: 1.2.25.0
        Win32 Version: 1.2.25
        CodeBase: file:///***/Local/MultiMiner/MultiMiner.Xgminer.DLL
    ----------------------------------------
    MultiMiner.Coinchoose.Api
        Assembly Version: 1.2.25.0
        Win32 Version: 1.2.25
        CodeBase: file:///***/Local/MultiMiner/MultiMiner.Coinchoose.Api.DLL
    ----------------------------------------
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------
    System.Core
        Assembly Version: 3.5.0.0
        Win32 Version: 3.5.30729.5420 built by: Win7SP1
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
    ----------------------------------------
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    dkxcqhsk
        Assembly Version: 1.2.25.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    qwz5m9f5
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    Newtonsoft.Json
        Assembly Version: 4.5.0.0
        Win32 Version: 5.0.6.16206
        CodeBase: file:///***/Local/MultiMiner/Newtonsoft.Json.DLL
    ----------------------------------------
    hffx4aqg
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    s_38vfof
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    cqg7yfuk
        Assembly Version: 1.2.25.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    c3rdndw1
        Assembly Version: 1.2.25.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    1yvct1tw
        Assembly Version: 1.2.25.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    Interop.Shell32
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///***/Local/MultiMiner/Interop.Shell32.DLL
    ----------------------------------------
    Interop.IWshRuntimeLibrary
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///***/Local/MultiMiner/Interop.IWshRuntimeLibrary.DLL
    ----------------------------------------
    Accessibility
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    ----------------------------------------

    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.

    For example:

    <configuration>
        <system.windows.forms jitDebugging="true">
    </configuration>

    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

  • Foss
    Full Member
    ***
    Offline Offline

    Activity: 125
    Merit: 100


    View Profile
    September 04, 2013, 09:40:28 AM
     #447
    Hi, how can i save settings to upgrade  MultiMiner to new version?
    BTC: 147kwy3LndX6jkwGC3mU9j6rZMWU8g1Amd
    DASH: XhR4V6ChnQp7LDWhpArwBMXARxU5LGiq8a
    ETH: 0xe4b10dff72b58a363a3c8b70e21cfb236e2697c9

  • purelithium
    Hero Member
    *****
    Offline Offline

    Activity: 504
    Merit: 500



    View Profile
    September 04, 2013, 10:40:19 AM
     #448
    Quote from: Foss on September 04, 2013, 09:40:28 AM
    Hi, how can i save settings to upgrade  MultiMiner to new version?

    Just upgrade, no settings will be deleted.
    Like my post? 1H7bfRYh7F89mfmFgsRCdn4awDaUHQmYqY

  • Foss
    Full Member
    ***
    Offline Offline

    Activity: 125
    Merit: 100


    View Profile
    September 04, 2013, 10:47:04 AM
     #449
    Quote from: purelithium on September 04, 2013, 10:40:19 AM
    Quote from: Foss on September 04, 2013, 09:40:28 AM
    Hi, how can i save settings to upgrade  MultiMiner to new version?

    Just upgrade, no settings will be deleted.
    Thanks  Smiley
    BTC: 147kwy3LndX6jkwGC3mU9j6rZMWU8g1Amd
    DASH: XhR4V6ChnQp7LDWhpArwBMXARxU5LGiq8a
    ETH: 0xe4b10dff72b58a363a3c8b70e21cfb236e2697c9

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 12:41:28 PM
    Last edit: September 04, 2013, 12:55:57 PM by nwoolls
     #450
    Quote from: JeanCool on September 04, 2013, 07:29:22 AM
    ll worked fine until this morning. I updated client and after that the following msg appears (using cgminer on Win7)

    This looks like the same error reported by purelithium and should be fixed for the next update. I think I'll release 1.2.26 with these 2 fixes I've made as another prerelease so I can make sure these are fixed. Thanks for reporting them!
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 12:53:07 PM
     #451
    Version 1.2.26 is available now as another prerelease. This should fix the errors reported in the 1.2.25 prerelease. If you are still having any issues or errors, please use the .Debug.zip release and CTRL+C & CTRL+V any errors into this thread. Thanks folks  Smiley

    • Fixed error saving changes (sequence contains no matching element)
    • Fixed error stopping mining immediately after starting (before shares are accepted)
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • bronan
    Hero Member
    *****
    Offline Offline

    Activity: 774
    Merit: 500


    Lazy Lurker Reads Alot


    View Profile
    September 04, 2013, 01:19:03 PM
     #452
    Zie het einde van dit bericht voor meer informatie over het aanroepen
    van JIT-foutopsporing (Just In Time) in plaats van dit dialoogvenster.

    ************** Tekst van uitzondering **************
    System.FormatException: De indeling van de invoertekenreeks is onjuist.
       bij System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       bij System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       bij MultiMiner.Xgminer.Api.Parsers.DeviceInformationParser.ParseTextForDeviceInform ation(String text, List`1 deviceInformation)
       bij MultiMiner.Xgminer.Api.ApiContext.GetDeviceInformation()
       bij MultiMiner.Win.MainForm.GetDeviceInformationFromMinerProcess(MinerProcess minerProcess)
       bij MultiMiner.Win.MainForm.PopulateStatsFromMinerProcesses()
       bij System.Windows.Forms.Timer.OnTick(EventArgs e)
       bij System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
       bij System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


    ************** Geladen assembly's **************
    mscorlib
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6407 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
    ----------------------------------------
    MultiMiner.Win
        Assembly-versie: 1.2.25.0
        Win32-versie: 1.2.25
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.Win.exe
    ----------------------------------------
    MultiMiner.Utility
        Assembly-versie: 1.0.0.0
        Win32-versie: 1.0.0.0
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.Utility.DLL
    ----------------------------------------
    System
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Windows.Forms
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6402 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System.Drawing
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    MultiMiner.Engine
        Assembly-versie: 1.2.25.0
        Win32-versie: 1.2.25
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.Engine.DLL
    ----------------------------------------
    MultiMiner.Xgminer
        Assembly-versie: 1.2.25.0
        Win32-versie: 1.2.25
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.Xgminer.DLL
    ----------------------------------------
    MultiMiner.Coinchoose.Api
        Assembly-versie: 1.2.25.0
        Win32-versie: 1.2.25
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.Coinchoose.Api.DLL
    ----------------------------------------
    System.Xml
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6411 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------
    System.Windows.Forms.resources
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6400 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_nl_b77a5c561934e089/System.Windows.Forms.resources.dll
    ----------------------------------------
    System.Core
        Assembly-versie: 3.5.0.0
        Win32-versie: 3.5.30729.6387 built by: Win8RTM
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
    ----------------------------------------
    System.Configuration
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6411 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    lszeavi5
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    Newtonsoft.Json
        Assembly-versie: 4.5.0.0
        Win32-versie: 5.0.6.16206
        CodeBase: file:///C:/Miner/Miners/MultiMiner/Newtonsoft.Json.DLL
    ----------------------------------------
    mscorlib.resources
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6407 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
    ----------------------------------------
    gaclativ
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    82r-micp
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    lgfmi2ry
        Assembly-versie: 1.2.25.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    uvyqyxtp
        Assembly-versie: 1.2.25.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    joaiyaib
        Assembly-versie: 1.2.25.0
        Win32-versie: 2.0.50727.6401 (Win8RTMGDR.050727-6400)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    Interop.Shell32
        Assembly-versie: 1.0.0.0
        Win32-versie: 1.0.0.0
        CodeBase: file:///C:/Miner/Miners/MultiMiner/Interop.Shell32.DLL
    ----------------------------------------
    Interop.IWshRuntimeLibrary
        Assembly-versie: 1.0.0.0
        Win32-versie: 1.0.0.0
        CodeBase: file:///C:/Miner/Miners/MultiMiner/Interop.IWshRuntimeLibrary.DLL
    ----------------------------------------
    Accessibility
        Assembly-versie: 2.0.0.0
        Win32-versie: 2.0.50727.6387 (Win8RTM.050727-6300)
        CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    ----------------------------------------
    MultiMiner.MobileMiner.Api
        Assembly-versie: 1.2.25.0
        Win32-versie: 1.2.25
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.MobileMiner.Api.DLL
    ----------------------------------------
    MultiMiner.Xgminer.Api
        Assembly-versie: 1.2.25.0
        Win32-versie: 1.2.25
        CodeBase: file:///C:/Miner/Miners/MultiMiner/MultiMiner.Xgminer.Api.DLL
    ----------------------------------------

    ************** JIT-foutopsporing **************
    Als u JIT-foutopsporing wilt inschakelen, moet in het configuratiebestand voor deze
    toepassing of computer (machine.config) de waarde
    jitDebugging in het gedeelte system.windows.forms zijn ingesteld.
    De toepassing moet ook zijn gecompileerd terwijl foutopsporing
    was ingeschakeld.

    Bijvoorbeeld:

    <configuration>
        <system.windows.forms jitDebugging="true">
    </configuration>

    Wanneer JIT-foutopsporing is ingeschakeld, worden onverwerkte uitzonderingen
    naar het JIT-foutopsporingsprogramma gestuurd dat op de computer is geregistreerd
    en worden niet door dit dialoogvenster verwerkt.


    lol i sure as hell keep you busy xD
    however this time somehow it hang up teamviewer and some other .net programs as well
    i had to drive to this server to checkup why i could not enter the machine

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 01:22:52 PM
     #453
    Quote from: bronan on September 04, 2013, 01:19:03 PM
    Zie het einde van dit bericht voor meer informatie over het aanroepen
    van JIT-foutopsporing (Just In Time) in plaats van dit dialoogvenster.

    ************** Tekst van uitzondering **************
    System.FormatException: De indeling van de invoertekenreeks is onjuist.
       bij System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
       bij System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
       bij MultiMiner.Xgminer.Api.Parsers.DeviceInformationParser.ParseTextForDeviceInform ation(String text, List`1 deviceInformation)
       bij MultiMiner.Xgminer.Api.ApiContext.GetDeviceInformation()

    Can you please post this with the .Debug.zip build? Thanks in advance.

    Edit: Also, if it's possible, when this happens can you CTRL+C and CTRL+V the last entry in the API Monitor? That should contain the actual invalid values that I could then show to Luke.
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • bronan
    Hero Member
    *****
    Offline Offline

    Activity: 774
    Merit: 500


    Lazy Lurker Reads Alot


    View Profile
    September 04, 2013, 01:25:56 PM
     #454
    ow lol i thought when i press the update it would auto update to the developer version
    however it updates to the normal one xD

    allright i will put those on the photobucket site so you might wanna save that next time Wink

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 01:27:09 PM
     #455
    Quote from: bronan on September 04, 2013, 01:25:56 PM
    ow lol i thought when i press the update it would auto update to the developer version
    however it updates to the normal one xD

    Yes I'm starting to think about a way around this. It's very helpful to have the debug information for any crashes but that build also technically has less optimizations than the regular one.
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • bronan
    Hero Member
    *****
    Offline Offline

    Activity: 774
    Merit: 500


    Lazy Lurker Reads Alot


    View Profile
    September 04, 2013, 01:29:48 PM
     #456
    Can you put in the program that it safes that info to a log file so we can simply send the log on these matters directly
    I think in the developer version would be enough for now
    Or add an option to save the logs when someone wants it

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 01:34:53 PM
     #457
    Quote from: bronan on September 04, 2013, 01:29:48 PM
    Can you put in the program that it safes that info to a log file so we can simply send the log on these matters directly
    I think in the developer version would be enough for now
    Or add an option to save the logs when someone wants it

    I'll add more logging yes - good idea. I've also made a change so that when you do the update from within the program, if you are already on the Debug build, that is what it will download (as you suggested). Both should be in the next update.
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • bronan
    Hero Member
    *****
    Offline Offline

    Activity: 774
    Merit: 500


    Lazy Lurker Reads Alot


    View Profile
    September 04, 2013, 01:36:36 PM
     #458
    Thank you and well done sir Cheesy

  • leopard2
    Legendary
    *
    Offline Offline

    Activity: 1372
    Merit: 1014



    View Profile
    September 04, 2013, 02:37:01 PM
     #459
    Quote from: nwoolls on September 04, 2013, 01:34:53 PM
    Quote from: bronan on September 04, 2013, 01:29:48 PM
    Can you put in the program that it safes that info to a log file so we can simply send the log on these matters directly
    I think in the developer version would be enough for now
    Or add an option to save the logs when someone wants it

    I'll add more logging yes - good idea. I've also made a change so that when you do the update from within the program, if you are already on the Debug build, that is what it will download (as you suggested). Both should be in the next update.

    Yes please!! I tried the cgminer 2>logfile.txt option, hoping that this creates a cgminer log so that I can monitor the temperature over time.

    However it crashes the cgminer. So please, can you add an option that enables Multiminer to save each of the three logs, API Monitor, process log and history, into  a plaintext logfile?

    I will send a donation your way when done  Wink
    Truth is the new hatespeech.

  • nwoolls (OP)
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    September 04, 2013, 03:11:58 PM
     #460
    Quote from: leopard2 on September 04, 2013, 02:37:01 PM
    Yes please!! I tried the cgminer 2>logfile.txt option, hoping that this creates a cgminer log so that I can monitor the temperature over time.

    However it crashes the cgminer. So please, can you add an option that enables Multiminer to save each of the three logs, API Monitor, process log and history, into  a plaintext logfile?

    I will send a donation your way when done  Wink

    It's already done for the next update. If you dig into %appdata%\MultiMiner you'll see there's already a JSON log for the History (MiningLog.json). In the next update that will be accompanied by ApiLog.json and ProcessLog.json with similar data from those screens in the program. The log files will also roll over after 1MB and only 2 copies will be kept. This was done because the API log file grows very quickly. Didn't want to fill up anyone's harddrive  Grin
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [23] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 ... 186 »
      Print  
Page 22
Viewing Page: 23

IRLBTC™ © 2025 IRLBTC.com