We're pleased to release Bminer 16.1.0.
* Support for BFC and Cuckatoo32.
Thank you for the Cuckatoo32 support! I've been using Bminer for Cuckatoo31 for a long time.
That said, Cuckatoo32 mining is not very stable. I'm running Ubuntu with Nvidia 1080ti cards. It runs good for about 5 minutes, then it has GPU issues, where it can't communicate with one ore more of the GPUs. I'm using the exact same config as Cuckatoo31. I've tried reducing OC, but that doesn't seem to make a difference.
Here is what the log shows:
[INFO] [2020-04-12T12:59:30-07:00] [GPU 0] Speed: 0.06 G/s Fidelity 0.981 Temp: 1C Fan: 1% Power: 1W 0.06 G/J
[ERRO] [2020-04-12T12:59:30-07:00] Failed to fetch device Status for device id: 0, Error code: 15
[INFO] [2020-04-12T12:59:30-07:00] [GPU 1] Speed: 0.06 G/s Fidelity 1.162 Temp: 1C Fan: 1% Power: 1W 0.06 G/J
[ERRO] [2020-04-12T12:59:30-07:00] Failed to fetch device Status for device id: 1, Error code: 15
[INFO] [2020-04-12T12:59:30-07:00] [GPU 2] Speed: 0.65 G/s Fidelity 1.124 Temp: 78C Fan: 50% Power: 204W 0.00 G/J
[INFO] [2020-04-12T12:59:30-07:00] [GPU 3] Speed: 0.06 G/s Fidelity 0.760 Temp: 1C Fan: 1% Power: 1W 0.06 G/J
[ERRO] [2020-04-12T12:59:30-07:00] Failed to fetch device Status for device id: 3, Error code: 15
[INFO] [2020-04-12T12:59:31-07:00] [GPU 4] Speed: 0.66 G/s Fidelity 0.804 Temp: 79C Fan: 50% Power: 196W 0.00 G/J
[INFO] [2020-04-12T12:59:31-07:00] [GPU 5] Speed: 0.06 G/s Fidelity 1.243 Temp: 1C Fan: 1% Power: 1W 0.06 G/J
[ERRO] [2020-04-12T12:59:31-07:00] Failed to fetch device Status for device id: 5, Error code: 15
[INFO] [2020-04-12T12:59:31-07:00] [GPU 6] Speed: 0.06 G/s Fidelity 1.210 Temp: 1C Fan: 1% Power: 1W 0.06 G/J
[ERRO] [2020-04-12T12:59:31-07:00] Failed to fetch device Status for device id: 6, Error code: 15
[INFO] [2020-04-12T12:59:31-07:00] [GPU 7] Speed: 0.06 G/s Fidelity 1.129 Temp: 1C Fan: 1% Power: 1W 0.06 G/J
[ERRO] [2020-04-12T12:59:31-07:00] Failed to fetch device Status for device id: 7, Error code: 15
[INFO] [2020-04-12T12:59:32-07:00] Accepted share
[INFO] [2020-04-12T12:59:32-07:00] Total 1.68 G/s Accepted shares 191 Rejected shares 0
[INFO] [2020-04-12T12:59:35-07:00] Accepted share
[FATA] [2020-04-12T12:59:56-07:00] Irrecoverable errors: [D5] GPU hang detected
Mining Cuckatoo32 using gminer is more stable, but the hashrate is 20% lower and CPU usage is much higher.
