what happens if the deadlines are not met? Such as make a purchase for August delivery and is delivered in October. Is the customer refunded funds or tough luck.. That's the only question I have now.


Thanks for answering all our questions presale. I hope it is a huge success.

Is your checkout page using https? I would not want to send CC info over http

I got private message inquiry whether this thread is legit from Morblias. I hereby confirm that Dave and Leszek (tytus) work together and that chips sold here are genuine. The rest is your relationships with your seller (i.e. payments, terms, etc.).

However - as my opinion whether you are recommended to buy or not buy - I don't know your regulations there and suppose they're quite strict, like FCC stuff and EMC tests. Until for example proper measurements of equipment are done - it may be risky to install many of these near yourself due to electromagnetic emission and noise. So either properly designer board and/or filters and/or shielding is required. I hope that this would be clarified soon. This is also true for homebrew devices that you make and don't care about switching noise such devices produce (like I saw in some DIY stuff where powering of such high-power chips are done in absolutely insane ways, or like problems with other asic vendors, you know them by the way likely, where their shipments were banned by customs due to these violations).

Anyway, as far as I know Dave has as well options to install miners in his location - this would be likely safe in any way, and maybe if you install these - before proper measurements done (i.e. in special laboratory with antennas where typically EMC measurements are done) - this maybe risky to install at home,  or at least close to you - so don't sit near miner 24x7 and don't put those close to you.

You should care about that and do not put your health into unnecessary risk. However I suppose Dave will do his best to solve these issues and make device fully compliant for safe usage. However that still won't mean that such equipment can be installed in bulk at home, and should be spreaded in space for maintaining safely low electromagnetic noise. Likely also undervolted boards is nice choice for safety, but all of that should be measured, and likely will be measured, the only delay could be there (and it is basically your choice) that such measurements could take additional time and can't be done before August timeframe. This depends.

Hi, were there any hash boards available to add to the "starter kit"?  Or just the ones that Ship in October?

The payment extension on the cart makes an SSL connection, but indeed I am still working on getting my EV SSL installed.  If someone wants me to put up a payment page using Stripe's secure iFrame, I'll do that in two shakes.

Sorry for the inconvenience!

I put the individual H-boards under "DIY" thinking people would want them standalone to play with.  I'll add it to the Kits category too.

The way these work is this:
M-board is master power backplane.  Also provides a way for the rPi controller to talk to the boards.  M-boards come with the starter kit.  You can order additional H-boards individually as you have the funds - up to 16 boards per M.  Thats about 250 - 300w against your PSU.  Its one USB/Ethernet to the rPi and thats it.

Going this route means you will buy additional H-boards in October.  We have reserved a certain amount of M's and H's for the full kit order (August delivery).

anybody else see this?

let me know your order number and I'll email you a copy

Sorry for the trouble!  I expect we'll see some early bugs like this.  Thanks for your patience...

Na mine looked fine. Had to click the button in gmail for 'always show images from ...@...com' button, but the order details, payment address, shipping details, and product all showed.

A little worried about having no FCC/UL certification.  Is there any worry about these things burning down my home or something :S  That would suck