Now that I got BFG running, I went through the voltages and adjusted them. The ones in the back ran away up to .88 and I trimmed them back down to .85-.87. I adjusted the ones in bank 0 up to .86. Bank 1 is at .83-.835. Bank 2 is at about .86. All cards are heatsinked on the diffusion plate on the back with special attention paid to the regulator. The cards are running between 90F and 110F. The entire setup is pulling 396 W from the wall. It seems to be chugging along, although I am wondering "Where's the beef?" That and the errors...
bfgminer version 3.5.1 - Started: [2013-11-16 08:46:54] - [ 0 days 00:06:41]
[M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit
Connected to mint.bitminter.com diff 512 with stratum as user [removed]_[#]
Block: ...6dc9b988 #269964 Diff:511M ( 3.66Ph/s) Started: [08:46:53]
ST:32 F:0 NB:1 AS:0 BW:[ 60/ 22 B/s] E:1869.49 I:13.30mBTC/hr BS:58.6k
4/256 | 429.1/426.1/399.3Gh/s | A:59 R:0+0(none) HW:2539/4.5%
--------------------------------------------------------------------------------
BSB 0: | 121.5/120.6/116.1Gh/s | A:17 R:0+0(none) HW: 582/4.4%
BSB 1: | 100.9/102.1/87.90Gh/s | A:13 R:0+0(none) HW:1238/8.3%
BSB 2: | 107.1/105.5/102.1Gh/s | A:12 R:0+0(none) HW: 348/2.9%
BSB 3: | 101.8/100.3/95.38Gh/s | A:17 R:0+0(none) HW: 378/2.5%
--------------------------------------------------------------------------------
[2013-11-16 08:53:22] BSB 0cc: 8 of the last 10 results were bad, reinitialisin
g
[2013-11-16 08:53:25] BSB 3bb: 8 of the last 14 results were bad, reinitialisin
g
[2013-11-16 08:53:27] BSB 1bp: 8 of the last 19 results were bad, reinitialisin
g
[2013-11-16 08:53:31] BSB 0bh: 8 of the last 25 results were bad, reinitialisin
g
[2013-11-16 08:53:34] BSB 1bv: 8 of the last 8 results were bad, reinitialising
[2013-11-16 08:53:35] BSB 1ah: 8 of the last 20 results were bad, reinitialisin
g
