welcome. Tell me, can I get the version with monitoring awesome miner ? can do a full test

palgin,
Thanks for great miner!
Please check and fix the next issue.
OCed 1080ti gives 1950 kh/s at PL 95%. My miner starts with 512 diff and everything is ok, but after strating mining devfee miner changes diff to 256 and then when goes back to my pool resets share diff to 512, my overall speed become approx. 1925 kh/s per card and do not increase to 1950 kh/s any more . Reporting power supply per card do not change.  

P.S.
looking forward of your miner release for nist5 and Lyra2Rev2 algos.

Works fine for me in full ccminer 2.2.4 compatibility mode, although it does not show hashrate and estimated revenue.
https://farm5.staticflickr.com/4742/38984305854_108120eb4b_o.png

rikuu you are right, I grabbed the wrong one. If you mouse over the links its clear which one to get.

My zotac 1060 minis
power 80%
core clock +80
memory clock +500

NOTE: overall speed is 3427.92kH/s
that is 684 kH/s per card, I am quite happy with this given the low power draw of 90 watts or so  

temps are a bit on the high side but the fans (on auto) spin up to deal with this

 INFO : [20:01:51] : GPU#1 - Zotac GTX 1060 3GB, Temp is 68C, Fans at 69%, Power consumption 88W
 INFO : [20:01:51] : Share Accepted
 INFO : [20:02:04] : Share Accepted, overall speed is 3427.92kH/s, efficiency 99.12%
 INFO : [20:02:11] : GPU#0 - Zotac GTX 1060 3GB, Temp is 71C, Fans at 71%, Power consumption 79W
 INFO : [20:02:11] : Share Accepted
 INFO : [20:02:29] : Share Accepted
 INFO : [20:02:31] : Share Accepted
 INFO : [20:02:35] : GPU#4 - Zotac GTX 1060 3GB, Temp is 64C, Fans at 67%, Power consumption 90W
 INFO : [20:02:35] : Share Accepted
 INFO : [20:03:11] : Share Accepted
 INFO : [20:03:13] : Share Accepted
 INFO : [20:03:14] : Share Accepted
 INFO : [20:03:28] : GPU#2 - Zotac GTX 1060 3GB, Temp is 71C, Fans at 70%, Power consumption 90W
 INFO : [20:03:28] : Share Accepted
 INFO : [20:03:33] : GPU#3 - Zotac GTX 1060 3GB, Temp is 66C, Fans at 68%, Power consumption 90W
 INFO : [20:03:45] : Share Accepted
 INFO : [20:03:52] : Share Accepted
 INFO : [20:04:42] : GPU#1 - Zotac GTX 1060 3GB, Temp is 68C, Fans at 69%, Power consumption 88W
 INFO : [20:04:42] : Share Accepted

UPDATE
Quick and dirty test, increased the power to 100% (from 80%, all other settings left the same) and observered the following:

1. Power draw went from 90 W to 114 W for each gpu
2. Temps of cards went from low 70's to low 80's, this is a bit too toasty for my liking
3. Hash rate basically unchanged (3427 kH/s to 3459 kH/s)

Conclusion: running at 80% power is the sweet spot for my 1060's

INFO : [20:14:56] : GPU#1 - Zotac GTX 1060 3GB, Temp is 80C, Fans at 73%, Power consumption 113W
 INFO : [20:14:56] : Share Accepted
 INFO : [20:15:04] : GPU#0 - Zotac GTX 1060 3GB, Temp is 81C, Fans at 74%, Power consumption 97W
 INFO : [20:15:04] : Share Accepted
 INFO : [20:15:11] : Share Accepted
 INFO : [20:15:14] : New block #50001 received, new difficulty is 196.686
 INFO : [20:15:27] : New block #50002 received, new difficulty is 198.676
 INFO : [20:15:33] : New block #50003 received, new difficulty is 200.403
 INFO : [20:15:59] : GPU#3 - Zotac GTX 1060 3GB, Temp is 74C, Fans at 71%, Power consumption 112W
 INFO : [20:15:59] : Share Accepted
 INFO : [20:16:11] : Share Accepted
 INFO : [20:16:23] : New block #50004 received, new difficulty is 213.135
 INFO : [20:16:32] : New block #50005 received, new difficulty is 224.775
 INFO : [20:16:53] : Share Accepted
 INFO : [20:16:55] : Share Accepted
 INFO : [20:17:06] : New block #50006 received, new difficulty is 225.633
 INFO : [20:17:12] : Share Accepted, overall speed is 3459.96kH/s, efficiency 98.83%
 INFO : [20:17:13] : Share Accepted
 INFO : [20:17:18] : GPU#4 - Zotac GTX 1060 3GB, Temp is 72C, Fans at 70%, Power consumption 113W
 INFO : [20:17:18] : Share A

don't switch so often.  miners typically take 10-15 seconds to start up, if you switch every 60, you're COMPLETELY wasting 25% of your time, regardless of dev fees.

also, the dev fee is hidden and random, to prevent people from 'auto-switching'  "just in time"

well what settings in MSI Afterburner have you set for your card?
seems that your setting to high and card goes to defence mode
try set PL 85 , core +30 and memory +100  -this is safe values any strix should capable to run it
test and reaport back if all is good

every miner program is "malware" in the eyes of almost every antivirus ... just download it and unpack in folder which is removed from antivirus program ...

edited: and when gpu dissapeared from afterbuer, just restart pc ... its because of high OC (i have 1080ti for mining and sometimes this happened)

I've tried to use hsrminer_neoscrypt.exe but it always showing me " Invalid Share " ...  50-60% (aprox) of the shares are rejected, i'm mining at bsod.pw, works 100% perfect with ccminer, stock settings at all.

Anyone can help?. Thx in advance.