Care to explain?

Taken right from the FAQ in the very first post of this thread:

Your hashrate is lower than it should be.

Kano, I apologize, but I do not understand what you're saying or trying to have me understand here. Please explain.

Thanks.

Hi all

I've been trying to mine litecoins using cgminer. I managed to connect to my pool ok but after running it for about 5 minutes I had q=20 a=1

I only had 5 minutes but I don't think those results look good. If I was mining for Bitcoin I would have had a lot more shares accepted in 5 minutes mining

Is there something going wrong?

Thanks

EDIT
Here is the command line and output:

C:\Apps\mining\guiminer-scrypt_win32_binaries_v0.03\cgminer>cgminer.exe --scrypt
 -u User.1 -p password -o stratum+tcp://stratum.give-me-ltc.com:3333 --gpu-platform
0 -d0 -w 256 -v 1 -I 18 -g 1 -l 1 -T --thread-concurrency 1600

[2013-04-09 19:59:52] Started cgminer 2.11.3
 [2013-04-09 19:59:52] Probing for an alive pool
 [2013-04-09 20:02:51] Stratum connection to pool 0 interrupted

 [2013-04-09 20:03:05] Stratum from pool 0 detected new block

 [2013-04-09 20:04:36] Stratum connection to pool 0 interrupted

 [2013-04-09 20:06:14] Stratum connection to pool 0 interrupted

 [2013-04-09 20:06:26] Stratum from pool 0 detected new block

 [2013-04-09 20:06:36] Accepted 8d8684d2 Diff 35/32 GPU 0
 [2013-04-09 20:07:13] Stratum from pool 0 detected new block

 [2013-04-09 20:08:43] Stratum connection to pool 0 interrupted

 [2013-04-09 20:09:40] Stratum from pool 0 detected new block

 [2013-04-09 20:09:53] Stratum from pool 0 detected new block

 [2013-04-09 20:11:17] Stratum from pool 0 detected new block

(1s):370.0K (avg):363.5Kh/s | Q:22  A:1  R:0  HW:0  E:5%  U:0.1/m

I can't seem to monitor cgminer (2.11.4) with a web front end (Anubis) when I'm scrypt mining.  If I do normal BTC mining it works fine.  I've tried to explicitly set the api port to 4028 using the --api-port switch but it still doesn't work.

If you want to use scrypt you should write scrypt and not script...

Hi there,

i hope its ok to write such problems here.

Its my first try to add some performance using the cgminer. The setup is Windows7 64 and 2x7950.

Thats the error i get right after starting:

 [2013-04-10 23:54:56] Started cgminer 2.11.3

 [2013-04-10 23:54:56] Started cgminer 2.11.3
 [2013-04-10 23:54:57] Probing for an alive pool
 [2013-04-10 23:55:04] Maximum buffer memory device 0 supports says 536870912
 [2013-04-10 23:55:04] Your scrypt settings come to 1572864000
 [2013-04-10 23:55:04] Error -61: clCreateBuffer (padbuffer8), decrease CT or in
crease LG
 [2013-04-10 23:55:04] Failed to init GPU thread 0, disabling device 0
 [2013-04-10 23:55:04] Restarting the GPU from the menu will not fix this.
 [2013-04-10 23:55:04] Try restarting cgminer.
Press enter to continue:

Thats what i tried to do:

cgminer.exe --scrypt -o stratum+tcp://stratum.give-me-ltc.com:3333 -u name.worker -p xyzxyzxyz --shaders 1792 -I 20 -w 256 --lookup-gap 2 --thread-concurrency 24000 -g 1

Any ideas??

I now dont know further. I installed the driver for intel 3000 gpu, chipsetdriver and newest beta of catalyst for the 7970M. Then installed AMD OpenCL SDK 2.7 because i have read 2.8 is faulty.

But -n shows still only one GPU. At least its the 7970M. It shows Error -1: Getting Device IDs (num).

Starting cgminer brings this error again and then a black screen while the card is running. When i see at the pool (bitparking) the hashrate starts with a crazy high value and constantly drops then even though the gpu seems to run because of high temperature and high clockrates (gpu-z). I believe nothing is sent then anymore.

So what could i try now?

win 7 seems to have had an update now my cgminer isnt loading just a heads up ill give more info when i get home later tonight