<<  >> (p.73)
    Author Topic: [ANN][LCC] Litecoin Cash | SHA256 LTC fork @ block 1371111 | 10:1 claim ratio  (Read 57267 times)

    • mark299
    Newbie
    *
    Offline Offline

    Activity: 34
    Merit: 0


    View Profile
    February 26, 2018, 12:14:38 PM
     #1441
    My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

    The last two lines in my log are below

    2018-02-26 12:13:34 29 addresses found from DNS seeds
    2018-02-26 12:13:34 dnsseed thread exit

    Any help would be appreciated.

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 12:25:38 PM
     #1442
    Quote from: mark299 on February 26, 2018, 12:14:38 PM
    My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

    The last two lines in my log are below

    2018-02-26 12:13:34 29 addresses found from DNS seeds
    2018-02-26 12:13:34 dnsseed thread exit

    Any help would be appreciated.

    This was discussed earlier. See pages 45 and 46 of this thread.

    Edit your .conf file in notepad. Add:

    addnode=91.128.161.204
    addnode=73.232.159.131
    addnode=69.123.49.160
    addnode=178.200.236.205
    addnode=66.69.246.134
    addnode=192.30.85.23
    addnode=37.14.134.175
    addnode=195.68.203.237
    addnode=189.216.159.2
    addnode=209.205.125.118
    addnode=76.97.160.198
    addnode=71.197.52.238

  • minernoob1
    Member
    **
    Offline Offline

    Activity: 285
    Merit: 10


    View Profile
    February 26, 2018, 12:32:33 PM
     #1443
    Quote from: desarpenteur on February 26, 2018, 09:44:30 AM
    Quote from: big_daddy on February 26, 2018, 09:25:26 AM
    the cryprobridge exchange is down? any news?
    I do not expect any news until Yobit LCC price slowly decrease from about $5 to $0.5. Time for Yobit (with the help of is bot) to make money by scalping naive people : arbitrage rules the trading world, everywhere. It will take weeks, and then they'll open the gate for deposit. And other little exchange (little by volume) like Cryptopia or C-CEX will add this new altcoin to their list.

    This is same as how it happen with Bitcoingold. I do not remember the exact numbers, but BTG was trading way higher there than anywhere else for days until they finally open deposits and price leveled out.

  • mark299
    Newbie
    *
    Offline Offline

    Activity: 34
    Merit: 0


    View Profile
    February 26, 2018, 12:33:02 PM
     #1444
    Quote from: g.m.tyshenk on February 26, 2018, 12:25:38 PM
    Quote from: mark299 on February 26, 2018, 12:14:38 PM
    My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

    The last two lines in my log are below

    2018-02-26 12:13:34 29 addresses found from DNS seeds
    2018-02-26 12:13:34 dnsseed thread exit

    Any help would be appreciated.

    This was discussed earlier. See pages 45 and 46 of this thread.

    Edit your .conf file in notepad. Add:

    addnode=91.128.161.204
    addnode=73.232.159.131
    addnode=69.123.49.160
    addnode=178.200.236.205
    addnode=66.69.246.134
    addnode=192.30.85.23
    addnode=37.14.134.175
    addnode=195.68.203.237
    addnode=189.216.159.2
    addnode=209.205.125.118
    addnode=76.97.160.198
    addnode=71.197.52.238





    Thanks for the response, but where is the .conf file? I dont see any conf file? Should i create one and what is the name?

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 12:37:41 PM
     #1445
    Quote from: mark299 on February 26, 2018, 12:14:38 PM
    My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

    The last two lines in my log are below

    2018-02-26 12:13:34 29 addresses found from DNS seeds
    2018-02-26 12:13:34 dnsseed thread exit

    Any help would be appreciated.

    I found the easiest way to sync my LCC wallet was to download the 8.5 GB bootstrap.DAT  file from the LCC website,  https://litecoinca.sh/ .  

    The torrent downloaded within 15 minutes.

    Unzip and extract the  bootstrap.dat into your LCC data directory.

    For Windows users, the default data directory is: C:\Users\YOUR-USER-NAME\AppData\Roaming\LitecoinCash.

    For Mac Users, the default directory is:  ~/Library/Application Support/litecoincash.

    Restart your LCC wallet.  It will start syncing in a few minutes.  It took 2.5 hours for the sync to complete on my sad slow laptop. .
    You can delete the bootstrap.dat file after you are completely sync'd (I just  left the bootstrap.dat file ).

    Now sync'd you will be able to claim your LCC.

    Good luck! Hope this helps.

  • BtcVolcano
    Sr. Member
    ****
    Offline Offline

    Activity: 672
    Merit: 250


    View Profile
    February 26, 2018, 12:38:01 PM
     #1446
    Probably it will be necessary to get acquainted with it in more detail as I have a few coins. Here many forks divorced, do not even manage to watch everything. And the coin most likely will cost very much soon, I think nevertheless it though some alternative and distribution of a portfolio.

  • mark299
    Newbie
    *
    Offline Offline

    Activity: 34
    Merit: 0


    View Profile
    February 26, 2018, 12:39:59 PM
     #1447
    UPDATE

    I have entered that on conf file from options

    Now i get this in the log

    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 11
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 20
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 16
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 17
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 17
    2018-02-26 12:36:05 GUI:   OpenType support missing for script 17
    2018-02-26 12:36:10 Loading addresses from DNS seeds (could take a while)
    2018-02-26 12:36:10 29 addresses found from DNS seeds
    2018-02-26 12:36:10 dnsseed thread exit

    And again just stuck at progress 0.0%

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 01:01:58 PM
     #1448
    Quote from: mark299 on February 26, 2018, 12:33:02 PM
    Quote from: g.m.tyshenk on February 26, 2018, 12:25:38 PM
    Quote from: mark299 on February 26, 2018, 12:14:38 PM
    My LCC wallet only connects to one peer and then after it reaches 5.5% sync; it looses the 1 peer and has 0 peer and then nothing happens. It is just stuck at this point.

    The last two lines in my log are below

    2018-02-26 12:13:34 29 addresses found from DNS seeds
    2018-02-26 12:13:34 dnsseed thread exit

    Any help would be appreciated.

    This was discussed earlier. See pages 45 and 46 of this thread.

    Edit your .conf file in notepad. Add:

    addnode=91.128.161.204
    addnode=73.232.159.131
    addnode=69.123.49.160
    addnode=178.200.236.205
    addnode=66.69.246.134
    addnode=192.30.85.23
    addnode=37.14.134.175
    addnode=195.68.203.237
    addnode=189.216.159.2
    addnode=209.205.125.118
    addnode=76.97.160.198
    addnode=71.197.52.238





    Thanks for the response, but where is the .conf file? I dont see any conf file? Should i create one and what is the name?

    For the .conf file:   

    For Macs

    1.  Make a file (using notepad) called litecoincash.conf in theUsers/yourusername/Library/Application Support/ folder.

    2. Add the  nodes I listed previously to the .conf file and save it.


    For Windows

    1. Make a file (using notepad) called litecoincash.conf in theUsers/yourusername/AppData/Roaming/LitecoinCash folder.


    2. Add the nodes to the .conf file and save it.

    Good luck!   

  • mark299
    Newbie
    *
    Offline Offline

    Activity: 34
    Merit: 0


    View Profile
    February 26, 2018, 01:05:11 PM
     #1449
    If i want to do the download .dat file option. where do i put this file? I am not able to finduser/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 01:09:23 PM
     #1450
    Quote from: mark299 on February 26, 2018, 12:39:59 PM
    UPDATE

    I have entered that on conf file from options

    Now i get this in the log

    2018-02-26 12:36:05 GUI:   OpenType support missing for script 12

    {{SNIP}}

    And again just stuck at progress 0.0%


    The best advice I can give is to add the nodes to the .conf file.
    And
    Download the bootstrap.DAT zip file.

    If you are syncing using the wallet only to update then your LCC  wallet will need to download ~16 GB of bootstrap data. Downloading this size of file data is slow using the wallet!

    This will take several hours or longer (days) to compete.

    I found using the bootstrap.dat  sped up the process and syncd my wallet in a few hours, as opposed to a several hours-days of syncing

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 01:16:30 PM
     #1451
    Quote from: mark299 on February 26, 2018, 01:05:11 PM
    If i want to do the download .dat file option. where do i put this file? I am not able to finduser/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

    I am using windows 7 so I can only speak to this OS (if you are using Win 8, 10 the directory path might be slightly different)

    You have installed the wallet executable to your G:/ drive.

    If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash folder.

    Unzip and put the bootstrap.dat file (8.5 GB) there.

    It is the same directory where you should have the newly created litecoincash.conf file (with nodes added).

    The (roaming) directory path may be hidden so check your folder attributes to -unhide if you can't see the path.

    Restart your LCC wallet and wait for syncing.

  • mark299
    Newbie
    *
    Offline Offline

    Activity: 34
    Merit: 0


    View Profile
    February 26, 2018, 01:18:00 PM
     #1452
    Quote from: g.m.tyshenk on February 26, 2018, 01:16:30 PM
    Quote from: mark299 on February 26, 2018, 01:05:11 PM
    If i want to do the download .dat file option. where do i put this file? I am not able to finduser/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

    I am using windows 7 so I can only speak to this OS.
    You have instalked the wallet executable to your G:/ drive.

    If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash. folder.

    Unzip and put the bootstrap.dat file (8.5 GB) there.

    It is the same directory where you should have the newly created litecoincash.conf file.

    The (roaming) directory may be hidden so check your foldr attributes to -unhide if you can't see the path.



    Thank you for helping. When i installed the wallet i created a non default location for my litecoin data, so i should unzip the .dat file into this directory instead of the users/appData folder, correct?

  • Vladlenius
    Full Member
    ***
    Offline Offline

    Activity: 168
    Merit: 100



    View Profile
    February 26, 2018, 01:18:38 PM
     #1453
    I just completed lcc synchronisation. I have 1000 lcc less then I should have. The history shows that just before the hf 1000lcc were send to another wallet (not mine). I didn’t made that or any other transaction on my LTC core wallet, so it is a false transaction. How is it possible? I double checked it on my ltc wallet, where no similar transaction is done.

  • marecek666
    Member
    **
    Offline Offline

    Activity: 236
    Merit: 12


    View Profile
    February 26, 2018, 01:26:17 PM
    Last edit: February 26, 2018, 02:12:16 PM by marecek666
     #1454
    it should be fine to have step by step instruction - how to export from LTC core and import to LCC core wallet. It is missing and really have no idea how to do it.
    edit:
    ok for others how to claim LCC
    in LTC CORE wallet
    open console and type
    -  walletpassphrase yourindividualpassphrase 60 (this only if you have locked wallet)push ENTER
    - dumpprivkey your-Litecoin-address-for-exportpush ENTER
    console will show you your priv key for the given LTC address and this is the key you are able to import into LCC core

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 01:28:42 PM
     #1455
    Quote from: mark299 on February 26, 2018, 01:18:00 PM
    Quote from: g.m.tyshenk on February 26, 2018, 01:16:30 PM
    Quote from: mark299 on February 26, 2018, 01:05:11 PM
    If i want to do the download .dat file option. where do i put this file? I am not able to finduser/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

    I am using windows 7 so I can only speak to this OS.
    You have instalked the wallet executable to your G:/ drive.

    If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash. folder.

    Unzip and put the bootstrap.dat file (8.5 GB) there.

    It is the same directory where you should have the newly created litecoincash.conf file.

    The (roaming) directory may be hidden so check your foldr attributes to -unhide if you can't see the path.




    Thank you for helping. When i installed the wallet i created a non default location for my litecoin data, so i should unzip the .dat file into this directory instead of the users/appData folder, correct?

    No, I believe that  regardless of where you installed the wallet executable files Windows creates a user Appdata folder for LCC on the root drive.  You need to put the bootstrap.dat  and litecoincash.conf files in the right place or you will continue to get script and sync errors.
    You can try copying the files to your G:/ LCC wallet directory but I am sure it will not work.

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 01:33:16 PM
     #1456
    Quote from: marecek666 on February 26, 2018, 01:26:17 PM
    it should be fine to have step by step instruction - how to export from LTC core and import to LCC core wallet. It is missing and really have no idea how to do it.

    Yes!!!!! It is a steep learning curve to figure out the wallet sync .... There are no good instructions but lots of good help and advice from this thread!

    I had to read through 40 pages on this forum before  I found the "nuggets" of information on how to successfully sync the LCC wallet and claim LCC.

    Everyone (especially those like me claiming forked coins for tbe first time) is having to struggle through this!  

  • marecek666
    Member
    **
    Offline Offline

    Activity: 236
    Merit: 12


    View Profile
    February 26, 2018, 01:34:31 PM
     #1457
    Quote from: g.m.tyshenk on February 26, 2018, 01:28:42 PM
    Quote from: mark299 on February 26, 2018, 01:18:00 PM
    Quote from: g.m.tyshenk on February 26, 2018, 01:16:30 PM
    Quote from: mark299 on February 26, 2018, 01:05:11 PM
    If i want to do the download .dat file option. where do i put this file? I am not able to finduser/AppData/roaming/Litcoincash directory. Should i create this directory? I installed my litecoin wallet in G: drive

    I am using windows 7 so I can only speak to this OS.
    You have instalked the wallet executable to your G:/ drive.

    If your are using windows go to your root  C:/Users/"your user name"/AppData/Roaming/LitecoinCash. folder.

    Unzip and put the bootstrap.dat file (8.5 GB) there.

    It is the same directory where you should have the newly created litecoincash.conf file.

    The (roaming) directory may be hidden so check your foldr attributes to -unhide if you can't see the path.




    Thank you for helping. When i installed the wallet i created a non default location for my litecoin data, so i should unzip the .dat file into this directory instead of the users/appData folder, correct?

    No, I believe that  regardless of where you installed the wallet executable files Windows creates a user Appdata folder for LCC on the root drive.  You need to put the bootstrap.dat  and litecoincash.conf files in the right place or you will continue to get script and sync errors.
    You can try copying the files to your G:/ LCC wallet directory but I am sure it will not work.
    putting bootstrap into data directory does not work for me. After moving this file into LCC data dir when I start LCC, it does not recognize it. It want sync from the scratch. The best way is to use this: http://mirror.enigma-mining.de/lcc/LitecoinCash_Appdata_Complte.7z
    After putting this into LCC data dir, it recognizes whole and simply sync. only the last blocks.

  • g.m.tyshenk
    Member
    **
    Offline Offline

    Activity: 392
    Merit: 13


    View Profile WWW
    February 26, 2018, 01:38:19 PM
     #1458
    Quote from: Vladlenius on February 26, 2018, 01:18:38 PM
    I just completed lcc synchronisation. I have 1000 lcc less then I should have. The history shows that just before the hf 1000lcc were send to another wallet (not mine). I didn’t made that or any other transaction on my LTC core wallet, so it is a false transaction. How is it possible? I double checked it on my ltc wallet, where no similar transaction is done.

    Did you -rescan your LCC wallet after you swept-imported all the private keys?  You need to do that or the wallet won't update properly and show your true amount of LCC..

  • jimboscott
    Full Member
    ***
    Offline Offline

    Activity: 256
    Merit: 110


    View Profile
    February 26, 2018, 02:14:05 PM
     #1459
    Quote from: luxMiner on February 20, 2018, 12:33:02 PM
    LCC Core Wallet question....

    Is it normal that the wallet, after fully synched (locked, encrypted and backed up) has  '0 active connections to the LitecoinCash network'? I take it's still early...?

    Same thing happening here.  Stuck 10 weeks behind and no network connections at all.

  • Angel Di
    Sr. Member
    ****
    Offline Offline

    Activity: 588
    Merit: 251

    EVOS


    View Profile
    February 26, 2018, 02:41:54 PM
     #1460
    Except as speculation of a coin and the price, it is interesting what in the future can turn out here good that it was possible to speak about prospects of this coin. As is well-known always the first get the greatest profit in something.
    Pages: « 1 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 [73] 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 »
      Print  
Page 72
Viewing Page: 73

IRLBTC™ © 2025 IRLBTC.com