Hi

Today I want to start mining MNX with my nvidia  rig 6 GPU GTX 1060 6GB

In the cfg file I read that for multiple GPU we need to set the following:

--device 0,1,2,3,4,5

But when I run the miner it only shows device 0

Can somebody help me with this  ?

these are my settings

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

Rem Insert your configuration file name here
set "CNAME=example_config.cfg"                              

Rem #################################
Rem ##  End of user-editable part  ##
Rem #################################


set "PARAMS=--use-config %CNAME%"

:MINE
Startwaithigh lolMiner-mnx.exe !PARAMS!
goto :MINE



##########################################################
# This is an example configuration file for lolMiner-mnx #
#                                                        #
# Every line starting with "--" will be interpreted as   #
# the normal parameters passed to lolMiner-mnx.          #
# Every other parameter will be handled as a comment.    #
#                                                        #
# Have fun mining!                                       #
##########################################################


### User based configuration
--server eu.minexpool.nl                              # Insert the pool address here
--port 9999                                           # Insert your pool port here
--user XS5urveU6ZVJZTD6yy8gNE9qnGLjMh5JSs.worker0     # Insert your user and worker names here
--pass x                                              # Insert your worker password here

               
### Device configuration
--platform 0                          # Insert the index of the platform you want to run on. Run lolMiner-mnx.exe --list-devices
                                      # to see all available platforms and the available devices for each platform
--device 0,1,2,3,4,5
                      # Insert your devices to run the miner here. For multiple GPU pass a comma separated list, e.g.: 0,1 for using two GPUs 

--set-work-batch 2                   # Uncommend this line to set the work batch size. Default is 2 which is ideal for Nvidia customer GPUs.
                                      # For AMD GPUs try higher values, e.g. 8 or 12 to optimize performance. Higher values increase GPU memory use of lolMiner-mnx.


### Display log configuration
#--set-short-stats-interval 5         # Uncommend to set the time interval (seconds) between the short term performance output. Set 0 to disable the output.    
#--set-long-stats-interval 60         # Uncommend to set the time interval (seconds) between the long term performance output. Set 0 to disable the output.
                                      # The value will also determine the length of the benchmark mode
#--enable-time-print                  # Uncommend to allow lolMiner-mnx to print the system time in HH:MM:SS format before each performance output.



### Expert parameters - handle with care
#--use-alt-mine-thread                # Enables the mine thread handling of lolMiner-mnx 0.13. This will disable multi-GPU support.
                                      # Therefore only the first number in --device is handled. The Nvidia load hotfix is enabled by default.
                  # Currently Intel devices are only working with this switch enabled.

#--set-sleep-duration 1000            # Sets the time span between polling the GPUs for completed work in microseconds. Lower values may stabilize
                                      # the performance, but also increase CPU load for all vendors. Setting the value to 0 will make lolMiner-mnx use one full
                                      # CPU core by 100% for handling all devices. If this is used with "--use-alt-mine-thread" it will disable the Nvidia hotfix.
                                      # Higher values reduce CPU load but may reduce hash speed. Default is 1000 microseconds = 1 millisecond.
                       
                                                            

Okay I opened cmd

c:\Users\miner2>

And what do I have to do now


i filled in you're line : lolMiner.exe --list devices

but it doesn't recognize   

it put in device 0,1,2,3,4 now and they work

if I add number 5 it doesn't work anymore and screen flickers , is there a maximum of GPU's ?

What OC settings are you using on 1080Ti ?

I tried this miner, but it's not stable on my setup, and I cant get around 84kSol/s (6 x 1080ti) when I disconnect Teamviewer, and 95kSol/s when TV is connected....

22kSol/s per card sounds great.