Using this:

0.65$ with 10% discount if paying in LTC at 960 kh/s per chip.

I get this:
Recursion 1 = 960 KH/S = 561.6 USD in LTC
Axiom 16 = 15,360 KH/s = 8,985.60 USD in LTC
Epsilon 32 = 30,720 KH/s = 17,971.20 USD in LTC

And if you ever have 8 chips
"The Dabs Miner" 8 = 7,680 KH/S = 4,492.80 USD in LTC

Or you can label it "The Fiat Killer" too, since he suggested it.

Okay, I'm buying either 8~9~10 "Recursions" or 1 "The Dabs Miner".

I have 4,700~ USD worth of assorted crypto. Engrave it on the PCB or I mean, print it on the Printed Circuit Board and I'm buying, and paying you now. Shall I send to LTCasicYDKQVGySmG5vwCiqiZFpMcr7oMi in 2.5 minutes?

hehe.

(okay, it's going to take longer than the next block, as it's scattered all over the place.)

Yes, we will actually be limiting their production overall. I do not have a figure yet, it will depend on how much of the total networks % we would effect by producing them.

Lol, well that is one way to do it.

This week is going to be fun.

This one doesn't really have a time limit? I may have missed out on your "non-competition" since I'm still HODLING my cryptocoins.

As soon as they come out of the foundry we will place them on the PCB and begin testing for about 2-3 days would be my educated guess. The PCB is available inside of 3 days, and has been completed for some time now (you can go look at the Aura open source PCB to see that this is true). Design is finished, we have been working on details to get the company properly established the past week. As soon as all the red tape/paperwork is done then we begin production. We have been aiming for April/May for delivery, this is the beauty of 65nm vs other smaller/newer tech, its a simple matter of using our turn in the queue. Rather than waiting on a spot to open up at one of the 28nm facilities. If anyone would like to confirm the normal production timeline for a 65nm, my engineers tell me 2-4 months. Our aim will be between March-May, and we will be paying for expedited production.

Okay. Sounds good. It seems getting a GPU now is going to take time to ROI simply because of power consumption, no matter what coin I mine.

lower nm:
smaller physical size
less energy used
faster (potentially)
more expensive

And lead time is increased due to very few of these facilities that can use the ~28nm processes. Its why we chose to stick to 65nm, the time and availability of the facilities is abundant in comparison.