After a number of people here and in the other discords had mentioned that they were getting the cuda memory errors on their rigs after the .4 update, but getting less of them when they took their overclocks off, I've since followed the same route and seen better, but still frustrating results. I haven't added an OC profile to .5 yet, but it is running smoothly so far, and with much improved hash rates on the 1070ti's and 1080ti's. Currently running some variation of 65% TDP and 65-75% fan speeds with no core/mem adjustments. Would love to see what others are showing for stability on their OC settings on 0.5 with 1070ti+ cards.

Very nice boost to the hashrate based on the little bit of testing I have done so far.  Nice indeed.

any news for Maxwell? (GTX980)

Great increase in hashrates without changing my OC settings...

10x 1070's Armor - now getting average of 41 sol/s with v0.5 and an OC like this: 65% PL, +50 Core, +400 Mem ( total powerdraw = 1290 w )

4x 1070ti Armor - now getting average of 45 sol/s with v0.5 and an OC like this: 65% PL, +130 Core, +550 Mem ( total powerdraw = 619 w )

2x 1070ti Gigabyte Aorus - now getting average of 44 sol/s with v0.5 and an OC like this: 65% PL, +130 Core, +550 Mem ( total powerdraw = 287 w )

3x 1080ti Founders - now getting average of 62 sol/s with v0.5 and OC like this: 65% PL, +125 Core, +500 Mem ( total powerdraw = 547 w )

4x 1080ti OC STrix - now getting average of 63 sol/s with v0.5 and OC like this: 65% PL, +50 Core, +500 Mem ( total powerdraw = 922 w )

5x 1080ti Asus Turbo - now getting average of 58 sol/s with v0.5 and OC like this: 65% PL, +100 Core, +500 Mem ( total powerdraw = 894 w )

6x 1080ti Aorus - now getting average of 60 sol/s with v0.5 and OC like this: 65% PL, +100 Core, +500 Mem ( total powerdraw = 1120 w )


All temps ( even with this high of temperature outside ) around 70 degrees celcius

Love you, EWBF!!   1063 has now up to 30 sol/s, average 27 sol/s (70%PL, +146 core, +300mem) driver 390.65 and the voltage jumps became slightly smaller

i do see an issue with my 10x 1070 cards...

Al of a sudden they drop in hash to 9-18 sols .....

Haven't had that before with the adjusted 0.3 version ...

I have set the intensity to 32, but after around 15 min the sols drop ....
And after a few minutes it goes up again ...

i will keep an eye on it, if it continues, i will try the older version again, and see if it is the software, or that my powersupply's are getting lazy

Dumb question on my part likely - but how did you get Power usage stats to display there in your log output?  I never have seen that, and could DEFINITELY use that to my advantage.  Thanks for sharing, great stats thanks to v0.5...nice indeed!  Cheers.

Can you explain how the --pers can be changed from the miner. Would like to get this implemented in Mining Rig Rentals. Can it just be specified like normal by --pers by the pool or is it a different command.

OK, no problem.

Well the hashrate miner is showing has increased, rigs are more stable. But for some reason, I mine less , and the difficulty hasnt increased that much. Dont know if its the pool not reacting well to new miner, or there is something wrong with miner. It should be same or more