Have you tried upping the MV on the core clock creeping slowly to 1100 if needed 1150 Max on one card I have wattage is not raise that much but I've seen maybe 5 to 8 watts Max. Also occasionally rebooting while tweaking sometimes we'll get the hashrate swear they need to be and then they'll hold on future restarts if needed

Based on your clinfo output, setting the option "--platform 0" should work.  Can you double check that setting this option doesn't work?

Also the clinfo output you pasted seems to be cut off at the end.  Can you paste your full clinfo output, but maybe put it inside of a code block so not too spam the thread? (You can insert code blocks using the # button when editing posts.)
It would also help to know which driver version you are running.

So the 0.4.2 its good to mine xcash? Thank you

C:\Users\MiNe\Desktop\Monero TRM\teamredminer-v0.4.2-win>teamredminer.exe --list_devices --platform 0 --log_file=miner.log -a cnr -o stratum+tcp://europe.cryptonight-hub.miningpoolhub.com:20580 -u <user> -p x --watchdog_script=watchdog.bat
          Team Red Miner version 0.4.2
[2019-03-16 09:55:23] Detected 6 devices, listed in OpenCL order:
[2019-03-16 09:55:23] Miner Platform OpenCL BusId    Name          Model                     Nr CUs
[2019-03-16 09:55:23] ----- -------- ------ -------- ------------- ------------------------- ------
[2019-03-16 09:55:23]     0        0      0 01:00.0  Ellesmere     Radeon RX 570 Series          32
[2019-03-16 09:55:23]     1        0      1 02:00.0  Ellesmere     Radeon RX 570 Series          32
[2019-03-16 09:55:23]     2        0      2 09:00.0  Ellesmere     Radeon RX 570 Series          32
[2019-03-16 09:55:23]     3        0      3 03:00.0  Ellesmere     Radeon RX 570 Series          32
[2019-03-16 09:55:23]     4        0      4 08:00.0  Ellesmere     Radeon RX 570 Series          32
[2019-03-16 09:55:23]     5        0      5 10:00.0  Ellesmere     Radeon RX 570 Series          32
[2019-03-16 09:55:23] Successful clean shutdown.

C:\Users\MiNe\Desktop\Monero TRM\teamredminer-v0.4.2-win>pause
Press any key to continue . . .

Plarform 0 worked now, it started mining

Can you please implement Haven algo ?
Thank you.

Hi alexmpa,

Which algorithm are you comparing between those two versions?

PM:d you!

Morning, for cryptonight v8 half (stellite, masari), cryptonight v8 double (x-cash) & cryptonight v8 reverse waltz (graft) do we need to change any settings other than picking the algo? Like for CN-R, I have 8+6 in my CMD... Will these above require didn't combos?

With a very high probability, you best config for CN/r will be the optimal choice for the added variants as well. Moreover, if your rig(s) are stable for CN/r, they should run fine for the other algos as well. It’s possible to additionally fine tune the clocks per algo though, but might not be worth it if you intend to algo switch often or automatically.