Hi, I was running a 1080 rig with nvOC 0019-3.0 all the time with NICE_X16R. Now I wanted to switch to NICE_ETHASH but unfortunetly with nvOC "never touch a running system" is again the truth: nothing works anymore
I thought I might need another update and ran bash nvOC upgrade but it didn't update to 3.2 so I thought I do a git clone and 'git submodule update --init --remote miners' but after that I have no nvOC_miner_update.sh script found. therefore nothing happens when I do a nvOC start with 3.2.
tried to go back to X16R but nothing happens. rig is now on idle
edit: ok found the update script but that is basically the same as doing bash nvOC miners-upgrade which I did including a recomplie all
m1@m1-desktop:~$nvOC start
Restarting nvOC tasks....
m1@m1-desktop:~/NVOC/mining$ bash nvOC master-log
m1@m1-desktop:~$nvOC master-log
==>home/m1/NVOC/mining/nvoc_logs/screenlog.0 <==
==>home/m1/NVOC/mining/nvoc_logs/tempcontrol-screenlog.0 <==
GPU 0, Target temp: 70, Current: 29, Diff: -41, Fan: 50, Power: 8.75
GPU 1, Target temp: 70, Current: 21, Diff: -49, Fan: 50, Power: 11.84
GPU 2, Target temp: 70, Current: 24, Diff: -46, Fan: 50, Power: 10.55
GPU 3, Target temp: 70, Current: 21, Diff: -49, Fan: 50, Power: 9.22
Mon May 27 16:59:55 EDT 2019 - All good, will check again in 18.0 seconds
==>home/m1/NVOC/mining/nvoc_logs/watchdog-screenlog.0 <==
<pid> [...] send signal to every <pid> listed
-<signal>, -s, --signal <signal>
specify the <signal> to be sent
-l, --list=[<signal>] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table
-h, --help display this help and exit
-V, --version output version information and exit
For more details see kill(1).
tail: cannot open '/home/m1/NVOC/mining/nvoc_logs/8_wtmautoswitchlog' for reading: No such file or directory
==>home/m1/NVOC/mining/nvoc_logs/screenlog.0 <==
==>home/m1/NVOC/mining/nvoc_logs/tempcontrol-screenlog.0 <==
DISABLED_GPUS not set
Temp Control for nvOC v0019-3.2
Version: v0019-3.2.0012
5264 (process ID) old priority 0, new priority -15
LOG FILE: (Showing the last 10 recorded entries)
WARNING: Sat Nov 3 00:36:32 EDT 2018 - Problem detected! GPU1 is not responding. Will give watchdog 60 seconds to react, if not we will reboot!
WARNING: Sat Nov 3 00:36:47 EDT 2018 - Problem detected! GPU1 is not responding. Will give watchdog 45 seconds to react, if not we will reboot!
WARNING: Mon May 27 10:57:26 EDT 2019 - tempcontrol@[GPU2] Problem detected: nvidia-smi failed to query current status. Watchdog has 60 seconds to react, otherwise we will reboot!
========= SMI Query output with errors @[GPU2]:
57, 85, 160.00, 15.72, GeForce GTX 1080 38, 70, 160.00, 18.00, GeForce GTX 1080 Ti 55, [Unknown Error], 160.00, [Unknown Error], GeForce GTX 1080 Ti 40, 70, 160.00, 18.40, GeForce GTX 1080 Ti
========= End of SMI query output
WARNING: Mon May 27 10:57:47 EDT 2019 - tempcontrol@[GPU2] Problem detected: nvidia-smi failed to query current status. Watchdog has 60 seconds to react, otherwise we will reboot!
========= SMI Query output with errors @[GPU2]:
50, 85, 160.00, 10.26, GeForce GTX 1080 33, 70, 160.00, 14.08, GeForce GTX 1080 Ti 52, [Unknown Error], 160.00, [Unknown Error], GeForce GTX 1080 Ti 35, 70, 160.00, 11.94, GeForce GTX 1080 Ti
========= End of SMI query output
TEMP_CONTROL v0019-3.2.0012 - nvOC v0019-3.2 - Community Release
Detected: 4 GPU's
GPU 0: POWER LIMIT: 160, TARGET TEMP: 70
GPU 1: POWER LIMIT: 160, TARGET TEMP: 70
GPU 2: POWER LIMIT: 160, TARGET TEMP: 70
GPU 3: POWER LIMIT: 160, TARGET TEMP: 70
GLOBAL FAN_ADJUST (%): 5
GLOBAL POWER_ADJUST (W): 5
GLOBAL ALLOWED_TEMP_DIFF (C): 2
GLOBAL RESTORE_POWER_LIMIT (%): 85
GLOBAL MINIMAL_FAN_SPEED (%): 50
GPU 0, Target temp: 70, Current: 29, Diff: -41, Fan: 50, Power: 8.26
GPU 1, Target temp: 70, Current: 21, Diff: -49, Fan: 50, Power: 11.25
GPU 2, Target temp: 70, Current: 24, Diff: -46, Fan: 50, Power: 10.65
GPU 3, Target temp: 70, Current: 21, Diff: -49, Fan: 50, Power: 9.02
Mon May 27 17:00:21 EDT 2019 - All good, will check again in 18.0 seconds
but unfortunately no mining, no matter if I choose ETHASH/CLAYMORE/ETHMINER or X16R/ZENEMY/BMINER:
there was one log back in the days where at least I could saw what command was used to fire up the mining tool but now I dont even see this
ethdcrminer64 -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 39qjQtznWGrsQAcbgQCa4VjQyMonzDNSUK -epsw x -esm 3 -allpools 1 -estale 0
the rig is running fine. Seriously: Why do I always have problems with nvOC after every single update/change process? Why are there dozens of logs if none of them help me in any way? What is the best way to check for problems in nvOC anyways?
Once I chose this OS because of the great features like profitswitching etc but nowadays I am just happy if it mines?!
I deleted all nvoc folders and cloned git again and things are working. besides ethminer&nicehash, wont start. claymore works
