>> (p.1)
    Author Topic: citb0in Solo-Mining Group - BLOCK SOLVERS (english)  (Read 5010 times)
    citb0in (OP)
    Hero Member
    *****
    Offline

    Activity: 1078
    Merit: 797


    Bitcoin g33k


    View Profile
    November 02, 2022, 03:32:52 PM
    Last edit: January 28, 2023, 12:47:13 AM by citb0in
    Merited by LoyceV (6), mikeywith (4), JayJuanGee (2), ABCbits (2)
     #1


    The following thread is the english translation of THIS THREAD from the german subforum

    All info on each run will be kept up to date here in the thread in post #2

    Roll Eyes Dear mining and competing fans, Welcome to citb0in SoloMining group Roll Eyes


    ██████╗ ██╗      ██████╗  ██████╗██╗  ██╗    ███████╗ ██████╗ ██╗     ██╗   ██╗███████╗██████╗ ███████╗
    ██╔══██╗██║     ██╔═══██╗██╔════╝██║ ██╔╝    ██╔════╝██╔═══██╗██║     ██║   ██║██╔════╝██╔══██╗██╔════╝
    ██████╔╝██║     ██║   ██║██║     █████╔╝     ███████╗██║   ██║██║     ██║   ██║█████╗  ██████╔╝███████╗
    ██╔══██╗██║     ██║   ██║██║     ██╔═██╗     ╚════██║██║   ██║██║     ╚██╗ ██╔╝██╔══╝  ██╔══██╗╚════██║
    ██████╔╝███████╗╚██████╔╝╚██████╗██║  ██╗    ███████║╚██████╔╝███████╗ ╚████╔╝ ███████╗██║  ██║███████║
    ╚═════╝ ╚══════╝ ╚═════╝  ╚═════╝╚═╝  ╚═╝    ╚══════╝ ╚═════╝ ╚══════╝  ╚═══╝  ╚══════╝╚═╝  ╚═╝╚══════╝




    We all are dreaming of finding a valid bitcoin block and getting the reward of currently 6.25 BTC, aren't we ? Welcome to the fascinating world of solo mining Tongue


    What is it about ?
    The BLOCK SOLVERS project was created to enable solomining as a group with a limited number of 10 participants and a small stake of only 0.001 BTC. We will rent SHA256 hash power through MiningRigRentals (hereafter abbreviated as MRR) and directed to the SoloCK pool with the hope of mining a new block on the Bitcoin blockchain. The number of participants is limited to 10 so that if a hit occurs, the payout amount of approximately 0.625 BTC per participant still remains attractive to each of the participants. The minimum stake per participant is only 0.001 BTC (=1mBTC). Thus, we have a total of 0.01 BTC available per run. With this we can run with a hashrate of e.g. 5 PH/s for about 10h, or 10 PH/s for about 5h, or 1 PH/s for about 42h. If the participants wish so after arrangement to run a higher hash rate for a certain round,  then we could increase the stake per participant to 0.003 BTC instead of the 0.001 BTC. With the total of 0.03 BTC in the pot we could engage a run with enormous 50 PH/s for approx. 3h. However, at least 1 PH/s hash rate will be rented for our runs. As a rule, the stake per slot is 0.001 BTC and with that we can run for 26h with 2 PH/s.

    What is the background ?
    Most of you certainly know Willis' block partys which exist and take place for a long time. I myself have already taken part in them because I would like to land a block hit. I love the competition and in a group it is even more exciting and fun. Unfortunately, the stake of 0.01 BTC seemed too high for my circumstances, I just can't afford that in the long run. In the last few months I've been doing my solo runs on my own, but that also at a hight cost of expense in the long run. So solomining as an individuum is really exhausting.

    Since I know from experience that it is not easy to invest 0.01 BTC as a stake per run and to participate in the long run, I would therefore like to offer an alternative option. This project Block Solvers is an alternative option for group-based solo mining and allows to participate cheaply and regularly. That's why the minimum stake of 1 mBTC (0.001 BTC) and maximum stake of 3 mBTC (0.003 BTC). Together as a group, we are stronger.


    What else is there to know?
    Although my offer does not directly compete with Willis' block partys as he is an old hand and trusted member here on the forum, I certainly did not want to start this project without his blessing. Willi is a long time and valued forum member and I respect the diligence and commitment he puts into his own Groupbuy Block Partys. That is why I contacted him beforehand and told him about my project and asked if he sees or even has any objections. In such a case I wouldn't have started it. Fortunately, Willi had nothing to complain and gave me so to speak green light for this. Thanks a bunch @Willi9974. I am fully aware that I do not yet have a special trust status in the forum, which is why there could always be justified doubts and concerns. But I don't want to leave it untried. If it doesn't succeed, then at least it was worth a try. Tongue On the other hand, I hope that the project will succeed and run regularly, simply because it's a very small risk of only 0.001 BTC and even the worst pessimist and doubter would be able to cope with that  Grin I can't put 6.25 BTC in escrow services as you really can understand, I just don't have that amount. But to provide a little bit of trust I figured I could transparently show everything here in the thread anytime someone feels the need to see it. Although the blockchain already reveals pretty much everything publicly. But I could also post screenshots from the MRR portal if there is interest. Of course, again, these would just be screenshots that anyone could fake, but I'm offering this transparency anyway. Also, I will list all transactions of each participant here in the thread for each run, so that everyone can check that they were valid transactions and I was not faking the participant list. If I post excerpts from the MRR portal history, don't be surprised if our MRR account starts with 0.00000875 BTC starting balance. I had transferred 0.002 BTC from my own wallet privately to our MRR account once, so I can start a test run and set up the pools/servers etc. The trial run was successful, everything worked as expected. There are a few Satoshis left (=0.00000875 BTC) which are still in the account and will be used for our group during the first run. If we actually find our first block and all participants get their reward as expected, the trust will raise and the thread will probably stay alive for a long time which I hope so.

    Conditions of participation Procedure :
    • If you want to participate, first check this thread on page 1 in post #2 to see if there is a free slot available for the next scheduled run.
    • If there are free slots for the next round, then please first send the minimum stake of 0.001 BTC to our group bitcoin address at MRR:
      bc1qtyvxwhwctneje9zjvqkzvp6yqtnqc3xs0sf6vd
    • and only then post the completed participation template here in the thread for registering. Pre-bookings (announcements only) without payment cannot be considered.
    • Please fill-in the desired round in the participation template.
    • It needs 3 confirmations for the amount sent to be credited to the MRR account.
    • We use FIFO (First-In-First-Out) so simply said first come, first served  Cheesy If someone has not made it for a run, simply queue and wait for the next run.
    • Each run is executed sequentially and never concurrently, so one round after another.
    • The payout address used on the soloCK pool is as follows. I assure with the signature that I am the owner of the keys and therefore the owner of the address:
    Code:
    Message: "This bitcoin address is owned by citb0in@bitcointalk.org and is used as payout address for the solomining group BLOCK SOLVERS."
    Bitcoin address: "1BTC4ALL6a2K1d4Ac4JjNJX7pgfRaaaZNd"
    Signature: "IC3+y9XCDP8bVJOWMGAs8rJvzSVfKoZMtGzTptCTgmgPcpxTxl2BCdoXGwYghtTwn6PS4iq3h+xCcnL8DcsAZAQ="
    • When participating, you have to enter your Bitcoin address to which you wish to receive the payout in case we solve a block. The payout amount will be paid out proportionally to the members of the corresponding round.
    • The payout takes place at the earliest after 100 confirmed blocks from block hit, this is defined by default in the Bitcoin protocol. This means that if we get a block solved, the reward will be sent by the coinbase transaction to the above payout address and only after another 100 blocks can this amount be used to sent the winnings to the participants. This is equivalent to about 1 day. I would like to mention this for the sake of order, because some may not know.
    • And last but not least, please vote for a hashrate in PH/s that you would prefer for the corresponding round. This will be voted and announced before the start which hashrate we will start for the respective round. The information in the following overview may vary depending on market prices, but offers an approximate guideline for our voting:

    Quote
    For the standard rounds with 0.001 BTC stake:
    10 PH/s for approx. 5 hours
    5 PH/s for approx. 9.5 hours
    2.5 PH/s for approx. 19 hours
    2 PH/s for approx. 22 hours
    1 PH/s for approx. 50 hours

    For the rounds with 0.002 BTC stake:.
    20 PH/s for approx. 7.5 hours
    10 PH/s for approx. 9.5 hours
    5 PH/s for approx. 19 hours
    2.5 PH/s for approx. 41 hours

    For the rounds with 0.003 BTC stake:.
    50 PH/s for approx. 3 hours
    25 PH/s for approx. 6 hours
    10 PH/s for approx. 10.5 hours
    5 PH/s for approx. 28 hours

    Chance calculation to hit a block in solo mining using different hashrate examples:

    at   1 PH/s --> 1 in 267.342 per block or 1 in 1.857 per 24h
    at 2.5 PH/s --> 1 in 106,937 per block or 1 in   743 per 24h
    at   5 PH/s --> 1 in  53,468 per block or 1 in   371 per 24h
    at  10 PH/s --> 1 in  26,734 per block or 1 in   186 per 24h
    at  25 PH/s --> 1 in  10,694 per block or 1 in    74 per 24h
    at  50 PH/s --> 1 in   5,347 per block or 1 in    37 per 24h


    For this reason I personally favor higher hashrates and accept the shorter runtime for it. The chances are then simply better. However, luck remains luck Smiley

    Participation Template to Fill Out and Post

    Quote
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Name: Forum Username
    My stake, for runs: 0,001 BTC for #001
    My TXID: 0123456789abcdef
    My payout address: bc1qMyOwnAddressForWinningsPayment
    My vote for hash rate: 10 P
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    So I will make the beginning as an example Cool

    Quote
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Name: citb0in
    My stake: 0.001 BTC for #001
    My TXID: 9f7ea59c8e4faf1b1f04a55d625eb33d5bb0e7c0d16e2c5928736a234351c102
    My payout address: bc1q4rlqf085qstl26d0dfwd6r78n7vwrt0rkxyk44
    My vote for hash rate: 2.5 P
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Settlement and current status
    I will always post the current status here in this thread under post #2 and I will also let you know as soon as the group account at MRR is fully loaded and ready to go. I manage all data about the group, the runs, the individual deposits with information like name, amount, TXIDs, etc. in a spreadsheet in Libreoffice Calc, so that I always have insight. There I also manage the individual rentals with corresponding details like start/end time, hashrate, costs, etc. I will try to keep the hard facts of each run clearly organized on post #2, so that there is no need to search laboriously in dozens of sub-pages of this thread. So all the info about the runs will be here on this thread in post #2.

    This is the API URI for the live report of our runs:
    Quote
    This can be queried at any time by anyone (even with a mobile phone) and shows the status of the current run but also the historical runs. Anyone interested in learning to understand the meaning of these values and how they are interpreted, can read my HowTo (in german). The most important and entertaining values are "bestShare", "shares" and "bestEver". If you have any questions about this info page, just post them in the corresponding thread. Currently, of course, the link goes nowhere because no run has started yet and no historical data is available. As soon as we start our first run, the data will appear under this link. In addition, I will name the individual runs with the help of the worker names clearly and meaningfully.

    For example, if we should start our first run with 2.5 PH/s and 19h runtime, then as suffix the worker name will be as follows:
    .RUN001-2500THs-19h

    For example, if the second run should start at 5 PH/s for 10h, then the workername will be:
    .RUN002-5PHs-10h

    As a result, we have a static and therefore fixed live report URL that does not change and can therefore be saved as a favorite in anyone's Internet browser on the PC or mobile phone to see at any time how the current run or the previous runs have gone. Based on the worker names, you can then distinguish and see the hashrate and duration used for the respective rounds.

    Wishlist, Comments, Final Words
    If there are any change requests or further ideas, I am of course all ears and open for feedback. Let's decide and vote together and I can gladly implement the results into the thread here by updating it. Finally, despite my due diligence, a short disclaimer: I cannot accept any liability for damage or loss of any kind, please only participate if you agree. Despite the obligatory disclaimer I still want to assure that I will manage this project to the best of my knowledge and conscience as I myself am very interested in a long-term and hopefully successful cooperation. In conclusion: In case of a block hit I would be very happy about a small donation as a thank you for the organizational administration effort, my address can be found in my profile Smiley

    If there are any questions, just let me know. I look forward to an adventurous and hopefully successful experience. Let's go miners ! Let's mine those blocks . . .


    Some signs are invisible, some paths are hidden - but those who see, know what to do. Follow the trail - Follow your intuition - [bc1qqnrjshpjpypepxvuagatsqqemnyetsmvzqnafh]
Page 1
Viewing Page: 1