This was the original idea back when GSDs first came out.  Single or dual 5 chip GSDs, sans fans, attached to a RPi, inside of a custom case the size of a soup can.  A simple, guided interface to set a pool from a list, which is updated on the back end for ease of use, and a place to put a username/password/wallet address.  With prices the way they are now, and the new $20 Rpi coming out, this could be done on the cheap.  It's not going to make people millions, or even make a return, but it would raise awareness and get miners into the hands of non-miners.

If anyone is serious about doing this, let me know(dev team?).  My team might get behind this again and work towards making this a reality.

-Fuse

1) There is already a premine, that has still to be distibuted to the masses.
2) When all is premine at once, the value will be none at once.
3) Foreign investors are warmly welcome. Guldencoin is a very trustfull coin for all early investors and we have to keep it that way.

For sure, a snazzy prototype could be made via 3d printer, and then produced in bulk by Chinese manufacturers on the cheap.  Only issue would be securing mining boards.  They aren't being produced anymore, but can be bought in the forums/ebay.  Doesn't necessarily have to be GSDs either, could be any low wattage small miner.  I have some connections in the old GSD sales arena that might be able to source some hardware.  No promises though.


Not entirely difficult.  Minera is open-source... just needs modifying.  I bet a competent designer could write a front end gui to fill in the back end mining, sans minera GUI.  All the internal code is there, it just needs to be reworked.

To simplify things even further, p2p or nomp style pools would be preferred so that the username input is just the wallet input.  No prior pool setup with accounts.  If MPOS style pools are used, there should be an easy tutorial on how to sign up for a pool.

-Fuse

LTEX, your stickers are almost gone, they are everywhere now, i am sure allot of people have seen them, unfortunately some have been removed, but most of them are still there, not always legal  . I traveled half the Netherlands to put these stickers on crowded places, and hope it pays off.

nice!. I remember one bus stop in Utrecht central, where i put the sticker, but because i had to wait for the bus there, in the beginning there was nobody, but after 5 min there were like 15 people waiting for the bus, and all of them were looking at the sticker, epic!. Just like it couldn't get any better, one guy just says out loud  "Eindelijk de Gulden terug, dat heeft lang geduurd!". Priceless!

#dowork

Right, we know where it's not profitable any more.

For keeping us out the danger zone and support the price a trading range of 400-450 would ne nice, but this is up to the market.
After the algorithm change there will be room in the higher regions.

If we also add hashpower in the meantime, maybe Clevercoin loses interest...
This weekend I have a look at Betarigs again.

In the context of adding more hashpower I have another idea:

If people make donations they can rent hashing power and add this adres as worker.
In short: if people make donations by renting hashpower they support the network and donation still occurs.

If there are some people wanting to donate GuldencoinWeb this way, you're welcome ;-) GJDgmDQm7x9xJfxzbdSGGBGnhUq46Cpxty

Another good project to donate is of course: http://www.villaticca.com/nl/

Let's bring this Gulden back to the Netherlands folks!

Wow, this low hashing power of Clevermining is exceptional, never saw it this low (and it's still decreasing) before. In the last couple of days these lower prices weren't reason for Clevermining to decrease the hashing power so dramatically like they do today. Maybe they are slowly retreating after all the comments overhere 

Just played a little. I have added around 1GH hashing power to the network, preventing the diff drops below 400. That worked out fine.
Clever didn't lower the hashing power, but Clever will only jump in when the diff is low. At current price (445 @ Bittrex ATM) that diff level is around 400.

Last blocks found by Clever: https://explorer.guldencoin.com/#/address/Gf7wGAwJGDLfoHcNCRLKZqpk2EQU5ixA6c
(Explore only the received transactions)
2014-11-14 12:39:11 +0100 diff: 357
2014-11-14 12:33:27 +0100 diff: 361
2014-11-14 12:33:23 +0100 diff: 362
2014-11-14 12:07:01 +0100 diff: 366
2014-11-14 12:06:57 +0100 diff: 366
2014-11-14 12:06:44 +0100 diff: 365
2014-11-14 12:06:31 +0100 diff: 362
2014-11-14 12:06:16 +0100 diff: 365
2014-11-14 11:52:35 +0100 diff: 366
2014-11-14 11:19:19 +0100 diff: 354
2014-11-14 11:18:09 +0100 diff: 351
2014-11-14 11:13:08 +0100 diff: 345

Monitoring is time consuming. Are here some python programmers? I see possibilities to make a bot.