<<  >> (p.42)
    Author Topic: [ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018  (Read 696379 times)

    • ChasingTheDream
    Sr. Member
    ****
    Offline Offline

    Activity: 292
    Merit: 250


    View Profile
    May 15, 2014, 04:13:47 AM
     #821
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

  • cameronpalte
    Sr. Member
    ****
    Offline Offline

    Activity: 294
    Merit: 250


    View Profile
    May 15, 2014, 04:17:06 AM
     #822
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

    I too encountered the problem: here is the article i read that helped https://foldingforum.org/viewtopic.php?f=74&t=25341
    Bitcoin Facuet List - Free http://bitcoinsfaucetslist.blogspot.com/

  • FifthGhostbuster
    Full Member
    ***
    Offline Offline

    Activity: 153
    Merit: 100


    View Profile
    May 15, 2014, 04:19:08 AM
     #823
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

    are you running multiple cards? I literally just ran into the same issue... still only solution i can find is restarting without stopping. still trying to find another sorry.
    Go CureCoin!

  • ChasingTheDream
    Sr. Member
    ****
    Offline Offline

    Activity: 292
    Merit: 250


    View Profile
    May 15, 2014, 04:21:09 AM
     #824
    Quote from: cameronpalte on May 15, 2014, 04:17:06 AM
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

    I too encountered the problem: here is the article i read that helped https://foldingforum.org/viewtopic.php?f=74&t=25341

    Thanks for this and I also saw a reference to a similar problem on the previous page after I posted.  My GPU's are factory overclocked so I suspect the OC'ing is the issue.  I'll look into it!

  • ChasingTheDream
    Sr. Member
    ****
    Offline Offline

    Activity: 292
    Merit: 250


    View Profile
    May 15, 2014, 04:22:39 AM
     #825
    Quote from: FifthGhostbuster on May 15, 2014, 04:19:08 AM
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

    are you running multiple cards? I literally just ran into the same issue... still only solution i can find is restarting without stopping. still trying to find another sorry.

    Yes each machine has two R9 290X TRI-X's in them and I am running into this on nearly every machine and I've got them in 7 machines so it seems to be consistent and I am running catalyst 14.4.  I suspect it is an overclock issue and my cards are factory overclocked.  I can tone them down and see what happens.

  • bardacuda
    Sr. Member
    ****
    Offline Offline

    Activity: 430
    Merit: 254


    View Profile
    May 15, 2014, 04:25:19 AM
    Last edit: May 15, 2014, 05:40:59 AM by bardacuda
     #826
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

    After you complete a work unit you should see something like this in the log:

    Code:
    23:58:06:WU00:FS01:0x17:Completed 5000000 out of 5000000 steps (100%)

    23:58:08:WU03:FS01:Connecting to 171.67.108.201:80
    23:58:08:WU03:FS01:Assigned to work server 140.163.4.231
    23:58:08:WU03:FS01:Requesting new work unit for slot 01: RUNNING gpu:0:Pitcairn [] from 140.163.4.231
    23:58:08:WU03:FS01:Connecting to 140.163.4.231:8080
    23:58:09:WU03:FS01:Downloading 4.84MiB
    23:58:11:WU03:FS01:Download complete
    23:58:11:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:13001 run:534 clone:7 gen:14 core:0x17 unit:0x0000001d538b3db7532c93b7e185f3f6

    23:58:26:WU00:FS01:0x17:Saving result file logfile_01.txt
    23:58:27:WU00:FS01:0x17:Saving result file checkpointState.xml
    23:58:29:WU00:FS01:0x17:Saving result file checkpt.crc
    23:58:29:WU00:FS01:0x17:Saving result file log.txt
    23:58:29:WU00:FS01:0x17:Saving result file positions.xtc
    23:58:31:WU00:FS01:0x17:Folding@home Core Shutdown: FINISHED_UNIT
    23:58:31:WU00:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
    23:58:31:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:13001 run:162 clone:2 gen:11 core:0x17 unit:0x00000021538b3db753287d9b0d4519a3
    23:58:31:WU00:FS01:Uploading 12.86MiB to 140.163.4.231
    23:58:31:WU00:FS01:Connecting to 140.163.4.231:8080

    23:58:31:WU03:FS01:Starting
    23:58:31:WU03:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/admin/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 4596 -checkpoint 15 -gpu 0 -gpu-vendor ati
    23:58:32:WU03:FS01:Started FahCore on PID 848
    23:58:32:WU03:FS01:Core PID:2244
    23:58:32:WU03:FS01:FahCore 0x17 started
    23:58:32:WU03:FS01:0x17:*********************** Log Started 2014-05-14T23:58:32Z ***********************
    23:58:32:WU03:FS01:0x17:Project: 13001 (Run 534, Clone 7, Gen 14)
    23:58:32:WU03:FS01:0x17:Unit: 0x0000001d538b3db7532c93b7e185f3f6
    23:58:32:WU03:FS01:0x17:CPU: 0x00000000000000000000000000000000
    23:58:32:WU03:FS01:0x17:Machine: 1
    23:58:32:WU03:FS01:0x17:Reading tar file state.xml
    23:58:33:WU03:FS01:0x17:Reading tar file system.xml
    23:58:33:WU03:FS01:0x17:Reading tar file integrator.xml
    23:58:33:WU03:FS01:0x17:Reading tar file core.xml
    23:58:33:WU03:FS01:0x17:Digital signatures verified
    23:58:33:WU03:FS01:0x17:Folding@home GPU core17
    23:58:33:WU03:FS01:0x17:Version 0.0.52

    23:58:37:WU00:FS01:Upload 7.78%
    23:58:43:WU00:FS01:Upload 17.01%
    23:58:49:WU00:FS01:Upload 25.76%
    23:58:55:WU00:FS01:Upload 34.51%
    23:59:01:WU00:FS01:Upload 43.75%
    23:59:07:WU00:FS01:Upload 52.49%
    23:59:13:WU00:FS01:Upload 61.24%
    23:59:19:WU00:FS01:Upload 69.99%
    23:59:25:WU00:FS01:Upload 78.74%
    23:59:31:WU00:FS01:Upload 87.49%
    23:59:37:WU00:FS01:Upload 96.24%
    23:59:39:WU00:FS01:Upload complete
    23:59:40:WU00:FS01:Server responded WORK_ACK (400)
    23:59:40:WU00:FS01:Final credit estimate, 63963.00 points
    23:59:40:WU00:FS01:Cleaning up

    00:02:17:WU03:FS01:0x17:Completed 0 out of 5000000 steps (0%)

    What does your log look like for these hung units?

    EDIT: Also does anyone know how to do a spoiler in this forum? I'm new here so sorry for taking up all the space with the log. Put it in a quote to make it a little smaller anyway lol

    EDIT2: Thanks meelvanchris that's better.

  • mycryptocoin
    Full Member
    ***
    Offline Offline

    Activity: 381
    Merit: 100

    Community Manager - Blockchain analyst


    View Profile WWW
    May 15, 2014, 04:31:56 AM
     #827

    Hey there! We like CureCoin a lot and set up a new pool to spread the hashrate. Who helps finding the first block?

    • No registration required: Mine anonymously.
    • 1% mining fee



    How to mine CureCoin with us

    Step 1: Generate your CureCoin wallet address
    Step 2: Point your miner to stratum+tcp://pool.mycryptoco.in:50080
    Step 3: Username = Your wallet address, Password doesn't matter (e.g. x)
    Step 4: As soon as the CureCoin Client allows us to send mined coins you'll get your CURE immediately

  • kqpahv
    Full Member
    ***
    Offline Offline

    Activity: 229
    Merit: 100


    View Profile
    May 15, 2014, 04:35:25 AM
     #828
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?


    I can confirm that this is a overclocking issue !
    You can read about my experience on the few last pages. My Gpu's have always been rock solid with every coin but I had to down clock them to avoid the 99.99% problem.

    Here's what I found from the folding forum:

    The usual reason for this occurring is a GPU reset, check the Windows logs for this happening around the time the WU stopped progressing in the folding log. The cause can be an overclocked GPU that is not stable for folding or a driver crash.

    Another action that will do this is sleeping or hibernating the system with a GPU WU active. The OS will reload regular RAM from where it is saved on disc for processes running on the CPU, but does not do that for GPU processing. A newer version of the GPU folding core is under test that is intended to detect that change in state and restart at the previous checkpoint, but has not yet been released to general use.

     

    FYI the 99% thing is purely a cosmetic symptom while the client starts up, or shuts down. Sometimes it takes a little bit for the GUI to sync with the work unit. This is especially true with the above mentioned circumstances.

  • ChasingTheDream
    Sr. Member
    ****
    Offline Offline

    Activity: 292
    Merit: 250


    View Profile
    May 15, 2014, 04:51:04 AM
     #829
    Quote from: bardacuda on May 15, 2014, 04:25:19 AM
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?

    After you complete a work unit you should see something like this in the log:

    Quote
    23:58:06:WU00:FS01:0x17:Completed 5000000 out of 5000000 steps (100%)

    23:58:08:WU03:FS01:Connecting to 171.67.108.201:80
    23:58:08:WU03:FS01:Assigned to work server 140.163.4.231
    23:58:08:WU03:FS01:Requesting new work unit for slot 01: RUNNING gpu:0:Pitcairn [] from 140.163.4.231
    23:58:08:WU03:FS01:Connecting to 140.163.4.231:8080
    23:58:09:WU03:FS01:Downloading 4.84MiB
    23:58:11:WU03:FS01:Download complete
    23:58:11:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:13001 run:534 clone:7 gen:14 core:0x17 unit:0x0000001d538b3db7532c93b7e185f3f6

    23:58:26:WU00:FS01:0x17:Saving result file logfile_01.txt
    23:58:27:WU00:FS01:0x17:Saving result file checkpointState.xml
    23:58:29:WU00:FS01:0x17:Saving result file checkpt.crc
    23:58:29:WU00:FS01:0x17:Saving result file log.txt
    23:58:29:WU00:FS01:0x17:Saving result file positions.xtc
    23:58:31:WU00:FS01:0x17:Folding@home Core Shutdown: FINISHED_UNIT
    23:58:31:WU00:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
    23:58:31:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:13001 run:162 clone:2 gen:11 core:0x17 unit:0x00000021538b3db753287d9b0d4519a3
    23:58:31:WU00:FS01:Uploading 12.86MiB to 140.163.4.231
    23:58:31:WU00:FS01:Connecting to 140.163.4.231:8080

    23:58:31:WU03:FS01:Starting
    23:58:31:WU03:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/admin/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 4596 -checkpoint 15 -gpu 0 -gpu-vendor ati
    23:58:32:WU03:FS01:Started FahCore on PID 848
    23:58:32:WU03:FS01:Core PID:2244
    23:58:32:WU03:FS01:FahCore 0x17 started
    23:58:32:WU03:FS01:0x17:*********************** Log Started 2014-05-14T23:58:32Z ***********************
    23:58:32:WU03:FS01:0x17:Project: 13001 (Run 534, Clone 7, Gen 14)
    23:58:32:WU03:FS01:0x17:Unit: 0x0000001d538b3db7532c93b7e185f3f6
    23:58:32:WU03:FS01:0x17:CPU: 0x00000000000000000000000000000000
    23:58:32:WU03:FS01:0x17:Machine: 1
    23:58:32:WU03:FS01:0x17:Reading tar file state.xml
    23:58:33:WU03:FS01:0x17:Reading tar file system.xml
    23:58:33:WU03:FS01:0x17:Reading tar file integrator.xml
    23:58:33:WU03:FS01:0x17:Reading tar file core.xml
    23:58:33:WU03:FS01:0x17:Digital signatures verified
    23:58:33:WU03:FS01:0x17:Folding@home GPU core17
    23:58:33:WU03:FS01:0x17:Version 0.0.52

    23:58:37:WU00:FS01:Upload 7.78%
    23:58:43:WU00:FS01:Upload 17.01%
    23:58:49:WU00:FS01:Upload 25.76%
    23:58:55:WU00:FS01:Upload 34.51%
    23:59:01:WU00:FS01:Upload 43.75%
    23:59:07:WU00:FS01:Upload 52.49%
    23:59:13:WU00:FS01:Upload 61.24%
    23:59:19:WU00:FS01:Upload 69.99%
    23:59:25:WU00:FS01:Upload 78.74%
    23:59:31:WU00:FS01:Upload 87.49%
    23:59:37:WU00:FS01:Upload 96.24%
    23:59:39:WU00:FS01:Upload complete
    23:59:40:WU00:FS01:Server responded WORK_ACK (400)
    23:59:40:WU00:FS01:Final credit estimate, 63963.00 points
    23:59:40:WU00:FS01:Cleaning up

    00:02:17:WU03:FS01:0x17:Completed 0 out of 5000000 steps (0%)

    What does your log look like for these hung units?

    EDIT: Also does anyone know how to do a spoiler in this forum? I'm new here so sorry for taking up all the space with the log. Put it in a quote to make it a little smaller anyway lol

    My logs shows the updates stopped long before 99.99%.  The 99.99% is not valid.  It actually stopped at 29% for the log I was looking at.  No errors in the F@H log but the updates stopped.  I'm sure the GPU driver crashed.  I need to look at the event log but I'm in the middle of another system rebuild at the moment.  lol

    Got to love the late night (for me) computer battles.

    Thanks for the info!

  • ChasingTheDream
    Sr. Member
    ****
    Offline Offline

    Activity: 292
    Merit: 250


    View Profile
    May 15, 2014, 04:53:44 AM
     #830
    Quote from: kqpahv on May 15, 2014, 04:35:25 AM
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?


    I can confirm that this is a overclocking issue !
    You can read about my experience on the few last pages. My Gpu's have always been rock solid with every coin but I had to down clock them to avoid the 99.99% problem.

    Here's what I found from the folding forum:

    The usual reason for this occurring is a GPU reset, check the Windows logs for this happening around the time the WU stopped progressing in the folding log. The cause can be an overclocked GPU that is not stable for folding or a driver crash.

    Another action that will do this is sleeping or hibernating the system with a GPU WU active. The OS will reload regular RAM from where it is saved on disc for processes running on the CPU, but does not do that for GPU processing. A newer version of the GPU folding core is under test that is intended to detect that change in state and restart at the previous checkpoint, but has not yet been released to general use.

     

    FYI the 99% thing is purely a cosmetic symptom while the client starts up, or shuts down. Sometimes it takes a little bit for the GUI to sync with the work unit. This is especially true with the above mentioned circumstances.

    Thanks for the info!  I also saw your situation where you have two computers with identical hardware and one is running at essentially half the speed of the other.  I've got the same situation and I'm rebuilding that machine right now.  I suspect it also has to do with GPU's in that machine.  But it has been hard reset many times while mining so I thought I would start fresh.  I suspect the cards in that machine will actually need to be toned down a bit more than the others.

  • compumine
    Sr. Member
    ****
    Offline Offline

    Activity: 252
    Merit: 250


    View Profile
    May 15, 2014, 04:57:45 AM
     #831
    Directed my bitcoin miner to this coin...

    Is this coin sha and scrypt friendly?  I read that it's good for asic and gpu mining?
     *Image Removed*

  • bardacuda
    Sr. Member
    ****
    Offline Offline

    Activity: 430
    Merit: 254


    View Profile
    May 15, 2014, 05:01:19 AM
     #832
    Quote from: compumine on May 15, 2014, 04:57:45 AM
    Directed my bitcoin miner to this coin...

    Is this coin sha and scrypt friendly?  I read that it's good for asic and gpu mining?

    Mining is done with SHA algo...can use either ASIC or GPU for that. However, you get much higher returns using GPUs for folding rather than mining (and you help the scientific research...which is the point really). The scrypt algo is unrelated.

  • kqpahv
    Full Member
    ***
    Offline Offline

    Activity: 229
    Merit: 100


    View Profile
    May 15, 2014, 05:08:42 AM
     #833
    Quote from: ChasingTheDream on May 15, 2014, 04:53:44 AM
    Quote from: kqpahv on May 15, 2014, 04:35:25 AM
    Quote from: ChasingTheDream on May 15, 2014, 04:13:47 AM
    I've been running into a lot of hung work units.  The work unit will hit the end and just sit there forever at 99.99% with 3 seconds remaining.  I've done a bit of looking around and from what I've seen so far they say look for connection errors in the logs.  So far I haven't seen any but I have these hung work units on several computers.  I'm not sure how to resolve them but they certainly are hurting my production.

    About the only thing I've been able to do so far is restart the computer without stopping the work unit first.  That seems to knock it back to a previous checkpoint and then it will process about 50% of the time after it redoes the work again which can take hours.

    If I stop the work unit prior to rebooting it just sits are 99.99% again.  There must be an easier way to get around these.  Has anyone else been experiencing this?


    I can confirm that this is a overclocking issue !
    You can read about my experience on the few last pages. My Gpu's have always been rock solid with every coin but I had to down clock them to avoid the 99.99% problem.

    Here's what I found from the folding forum:

    The usual reason for this occurring is a GPU reset, check the Windows logs for this happening around the time the WU stopped progressing in the folding log. The cause can be an overclocked GPU that is not stable for folding or a driver crash.

    Another action that will do this is sleeping or hibernating the system with a GPU WU active. The OS will reload regular RAM from where it is saved on disc for processes running on the CPU, but does not do that for GPU processing. A newer version of the GPU folding core is under test that is intended to detect that change in state and restart at the previous checkpoint, but has not yet been released to general use.

     

    FYI the 99% thing is purely a cosmetic symptom while the client starts up, or shuts down. Sometimes it takes a little bit for the GUI to sync with the work unit. This is especially true with the above mentioned circumstances.

    Thanks for the info!  I also saw your situation where you have two computers with identical hardware and one is running at essentially half the speed of the other.  I've got the same situation and I'm rebuilding that machine right now.  I suspect it also has to do with GPU's in that machine.  But it has been hard reset many times while mining so I thought I would start fresh.  I suspect the cards in that machine will actually need to be toned down a bit more than the others.





    Yeah, I am still combating with the only 50% of PPD shown symptom. Checking the logs I found out that the PPD figure shown in the client is actually inaccurate ! I was getting twice as many points for my WU's than the GUI estimated. Looking at how much time the WU took and how many points it gave me I did the math and my actual PPD for each card was ~120K as it should be despite the client showing 55K  Roll Eyes  So it's only a cosmetical thing but I would like to get it fixed for a better overview Tongue

  • atom1cdonkey
    Member
    **
    Offline Offline

    Activity: 112
    Merit: 10


    View Profile
    May 15, 2014, 05:18:33 AM
     #834
    This looks very interesting. I have a pretty powerful gaming PC that I will use for folding. I've tested it for about 5 minutes, it showed me a rough 100k points per day. How much coins would this roughly equal?


    Before I start using it 24/7 I will need to put some new cooling paste on the CPU, it is hitting 90c+ degrees...lol.


    Thanks
    BTC: 18ose7BN8xPkaHsT1XTetCBhoB4drDqLSP

  • bardacuda
    Sr. Member
    ****
    Offline Offline

    Activity: 430
    Merit: 254


    View Profile
    May 15, 2014, 05:21:19 AM
     #835
    Quote from: atom1cdonkey on May 15, 2014, 05:18:33 AM
    This looks very interesting. I have a pretty powerful gaming PC that I will use for folding. I've tested it for about 5 minutes, it showed me a rough 100k points per day. How much coins would this roughly equal?


    Before I start using it 24/7 I will need to put some new cooling paste on the CPU, it is hitting 90c+ degrees...lol.


    Thanks

    See here:

    https://bt.irlbtc.com/view/603757.msg6722773#msg6722773

    EDIT: What do you have for hardware? Not sure what you consider pretty powerful but a system with a single 7870/7950/270/280 should get 100k PPD. You should be able to get a lot more than that if you have something like crossfire 290Xs or whatever.

  • atom1cdonkey
    Member
    **
    Offline Offline

    Activity: 112
    Merit: 10


    View Profile
    May 15, 2014, 05:22:34 AM
     #836
    Quote from: bardacuda on May 15, 2014, 05:21:19 AM
    Quote from: atom1cdonkey on May 15, 2014, 05:18:33 AM
    This looks very interesting. I have a pretty powerful gaming PC that I will use for folding. I've tested it for about 5 minutes, it showed me a rough 100k points per day. How much coins would this roughly equal?


    Before I start using it 24/7 I will need to put some new cooling paste on the CPU, it is hitting 90c+ degrees...lol.


    Thanks

    See here:

    https://bt.irlbtc.com/view/603757.msg6722773#msg6722773


    Thanks for the help.

    As soon as I can put a good week of folding in and I have some results, I will post them.
    BTC: 18ose7BN8xPkaHsT1XTetCBhoB4drDqLSP

  • meelvanchris
    Sr. Member
    ****
    Offline Offline

    Activity: 336
    Merit: 250



    View Profile
    May 15, 2014, 05:34:28 AM
     #837
    Quote from: bardacuda on May 15, 2014, 04:25:19 AM
    After you complete a work unit you should see something like this in the log:

    Code:
    23:58:06:WU00:FS01:0x17:Completed 5000000 out of 5000000 steps (100%)

    23:58:08:WU03:FS01:Connecting to 171.67.108.201:80
    23:58:08:WU03:FS01:Assigned to work server 140.163.4.231
    23:58:08:WU03:FS01:Requesting new work unit for slot 01: RUNNING gpu:0:Pitcairn [] from 140.163.4.231
    23:58:08:WU03:FS01:Connecting to 140.163.4.231:8080
    23:58:09:WU03:FS01:Downloading 4.84MiB
    23:58:11:WU03:FS01:Download complete
    23:58:11:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:13001 run:534 clone:7 gen:14 core:0x17 unit:0x0000001d538b3db7532c93b7e185f3f6

    23:58:26:WU00:FS01:0x17:Saving result file logfile_01.txt
    23:58:27:WU00:FS01:0x17:Saving result file checkpointState.xml
    23:58:29:WU00:FS01:0x17:Saving result file checkpt.crc
    23:58:29:WU00:FS01:0x17:Saving result file log.txt
    23:58:29:WU00:FS01:0x17:Saving result file positions.xtc
    23:58:31:WU00:FS01:0x17:Folding@home Core Shutdown: FINISHED_UNIT
    23:58:31:WU00:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
    23:58:31:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:13001 run:162 clone:2 gen:11 core:0x17 unit:0x00000021538b3db753287d9b0d4519a3
    23:58:31:WU00:FS01:Uploading 12.86MiB to 140.163.4.231
    23:58:31:WU00:FS01:Connecting to 140.163.4.231:8080

    23:58:31:WU03:FS01:Starting
    23:58:31:WU03:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/admin/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 4596 -checkpoint 15 -gpu 0 -gpu-vendor ati
    23:58:32:WU03:FS01:Started FahCore on PID 848
    23:58:32:WU03:FS01:Core PID:2244
    23:58:32:WU03:FS01:FahCore 0x17 started
    23:58:32:WU03:FS01:0x17:*********************** Log Started 2014-05-14T23:58:32Z ***********************
    23:58:32:WU03:FS01:0x17:Project: 13001 (Run 534, Clone 7, Gen 14)
    23:58:32:WU03:FS01:0x17:Unit: 0x0000001d538b3db7532c93b7e185f3f6
    23:58:32:WU03:FS01:0x17:CPU: 0x00000000000000000000000000000000
    23:58:32:WU03:FS01:0x17:Machine: 1
    23:58:32:WU03:FS01:0x17:Reading tar file state.xml
    23:58:33:WU03:FS01:0x17:Reading tar file system.xml
    23:58:33:WU03:FS01:0x17:Reading tar file integrator.xml
    23:58:33:WU03:FS01:0x17:Reading tar file core.xml
    23:58:33:WU03:FS01:0x17:Digital signatures verified
    23:58:33:WU03:FS01:0x17:Folding@home GPU core17
    23:58:33:WU03:FS01:0x17:Version 0.0.52

    23:58:37:WU00:FS01:Upload 7.78%
    23:58:43:WU00:FS01:Upload 17.01%
    23:58:49:WU00:FS01:Upload 25.76%
    23:58:55:WU00:FS01:Upload 34.51%
    23:59:01:WU00:FS01:Upload 43.75%
    23:59:07:WU00:FS01:Upload 52.49%
    23:59:13:WU00:FS01:Upload 61.24%
    23:59:19:WU00:FS01:Upload 69.99%
    23:59:25:WU00:FS01:Upload 78.74%
    23:59:31:WU00:FS01:Upload 87.49%
    23:59:37:WU00:FS01:Upload 96.24%
    23:59:39:WU00:FS01:Upload complete
    23:59:40:WU00:FS01:Server responded WORK_ACK (400)
    23:59:40:WU00:FS01:Final credit estimate, 63963.00 points
    23:59:40:WU00:FS01:Cleaning up

    00:02:17:WU03:FS01:0x17:Completed 0 out of 5000000 steps (0%)

    What does your log look like for these hung units?

    EDIT: Also does anyone know how to do a spoiler in this forum? I'm new here so sorry for taking up all the space with the log. Put it in a quote to make it a little smaller anyway lol
    By spoiler did you mean like so..?  if yes, then it's the hastag # next to quote...
        ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄   
       ████████████████████████████████   
         ▀██████████████████████████▀     
            ▀████████████████████▀       
              ▀████████████████▀         
                ██████████████           
                ▀████████████▀           
                 ▀██████████▀             
                  ██████████             
                   ████████               
                   ▀██████▀               
                    ██████               
                      ▀▀    		.
    trade.io.    		██████
    ██████
    ███
    ███
    ███
    ███
    ███
    ███
    ███
    ███
    ███
    ██████
    ██████
    ▄██████████████████▄
    ███       ▄█▀███████
    ███       ██████████
    ███       ██████████
    ███       ██████████
    ███              ███
    ███   ▄▄▄▄▄▄▄▄   ███
    ███   ▄▄▄▄▄▄▄▄   ███
    ███              ███
    ███▄▄▄▄▄▄▄▄▄▄▄▄▄▄███
    ▀██████████████████▀
    ▄██████████████████▄
    ███████████▀ ███████
    █████████▀   ███████
    ███████▀     ██▀ ███
    ███ ▀▀       █▄▄████
    ███          █▀▀▀▀██
    ███ ▄▄       ███████
    ███████▄     █▄ ▀███
    █████████▄   ███▄███
    ███████████▄ ███████
    ▀██████████████████▀
    ▄██████████████████▄
    ████████████████████
    ███████████████▀▀ ██
    █████████▀▀   ▄  ███
    ████▀▀     ▄█▀   ███
    ███▄    ▄██      ███
    █████████▀      ▄███
    ██████████▄     ████
    █████████████▄ ▄████
    ████████████████████
    ▀██████████████████▀    		██████
    ██████
       ███
       ███
       ███
       ███
       ███
       ███
       ███
       ███
       ███
    ██████
    ██████    		.
    .Join the Trading Revolution.

  • bardacuda
    Sr. Member
    ****
    Offline Offline

    Activity: 430
    Merit: 254


    View Profile
    May 15, 2014, 05:46:37 AM
     #838
    Quote from: meelvanchris on May 15, 2014, 05:34:28 AM
    By spoiler did you mean like so..?  if yes, then it's the hastag # next to quote...

    Ahh thanks...that's not exactly what I was trying to do but close enough...by spoiler I mean where you see a single line such as this:



    and you can toggle showing/hiding the full content by clicking it.

  • sumgye
    Sr. Member
    ****
    Offline Offline

    Activity: 280
    Merit: 250



    View Profile
    May 15, 2014, 05:47:07 AM
     #839
    I was wondering if anyone's considered hitting this thing from the third angle. We've got GPU's hitting the folding pretty hard. We've got SHA256 ASIC's hitting the mining end pretty hard. What about a multipool so the SCRYPT ASIC's can hit the value end of things? Then all mining hardware could be used to develop and support CureCoin. Just a thought.

  • cameronpalte
    Sr. Member
    ****
    Offline Offline

    Activity: 294
    Merit: 250


    View Profile
    May 15, 2014, 05:47:37 AM
     #840
    Quote from: atom1cdonkey on May 15, 2014, 05:18:33 AM
    This looks very interesting. I have a pretty powerful gaming PC that I will use for folding. I've tested it for about 5 minutes, it showed me a rough 100k points per day. How much coins would this roughly equal?


    Before I start using it 24/7 I will need to put some new cooling paste on the CPU, it is hitting 90c+ degrees...lol.


    Thanks

    100,000 120,000,000 points * 7488 =
    6.24 coins/day
     
    Price = 0.005 BTC/day = 0.0312 BTC day

    $13.80 day
    Bitcoin Facuet List - Free http://bitcoinsfaucetslist.blogspot.com/
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [42] 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 ... 233 »
      Print  
Page 41
Viewing Page: 42

IRLBTC™ © 2025 IRLBTC.com