There are many things planned, encrypted messaging will be the next task to do.

Have you tried other configurations (setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1  ...) ?

node please my wallet can't sync with v1.1.0

Use cgwatcher to restart miner every 30 min


[
{
"addr" : "188.165.164.26:9802",
"services" : "00000003",
"lastsend" : 1401022545,
"lastrecv" : 1401022545,
"bytessent" : 2535,
"bytesrecv" : 15424,
"blocksrequested" : 0,
"conntime" : 1401022453,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76100,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "5.135.159.132:9802",
"services" : "00000003",
"lastsend" : 1401022503,
"lastrecv" : 1401022545,
"bytessent" : 899,
"bytesrecv" : 17396,
"blocksrequested" : 0,
"conntime" : 1401022454,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76100,
"banscore" : 0
},
{
"addr" : "24.206.71.10:9802",
"services" : "00000003",
"lastsend" : 1401022545,
"lastrecv" : 1401022546,
"bytessent" : 1973,
"bytesrecv" : 9312,
"blocksrequested" : 0,
"conntime" : 1401022460,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76101,
"banscore" : 0
},
{
"addr" : "178.158.146.102:9802",
"services" : "00000003",
"lastsend" : 1401022545,
"lastrecv" : 1401022545,
"bytessent" : 3704,
"bytesrecv" : 9473,
"blocksrequested" : 0,
"conntime" : 1401022477,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76102,
"banscore" : 0
},
{
"addr" : "76.174.171.46:9802",
"services" : "00000003",
"lastsend" : 1401022545,
"lastrecv" : 1401022546,
"bytessent" : 4355,
"bytesrecv" : 11326,
"blocksrequested" : 0,
"conntime" : 1401022505,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76103,
"banscore" : 0
},
{
"addr" : "67.87.207.76:9802",
"services" : "00000003",
"lastsend" : 1401022545,
"lastrecv" : 1401022545,
"bytessent" : 2386,
"bytesrecv" : 11264,
"blocksrequested" : 0,
"conntime" : 1401022505,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76103,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:90d7:2098:f97:9552:b341]:9802",
"services" : "00000003",
"lastsend" : 1401022545,
"lastrecv" : 1401022546,
"bytessent" : 2264,
"bytesrecv" : 9350,
"blocksrequested" : 0,
"conntime" : 1401022513,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76104,
"banscore" : 0
},
{
"addr" : "23.92.53.139:9802",
"services" : "00000003",
"lastsend" : 1401022548,
"lastrecv" : 1401022549,
"bytessent" : 228,
"bytesrecv" : 4464,
"blocksrequested" : 0,
"conntime" : 1401022547,
"version" : 70002,
"subver" : "/Talkcoin:1.0.0/",
"inbound" : false,
"startingheight" : 76107,
"banscore" : 0
}
]

If I run with this settings it works. (2.2mh for r9 270 and 4.1mh for r9 280x)


but if I run it like this (works on darkcoin)

it won't work, cmd just closes itself. I also use settings from this thread for 270 and 7970 but still don't work. Any help?

Had the same problem. Had to remove the Engine/Mem speed paramters and it worked fine. Here is my config for my rigs which have 4 * R9 280x, 8GB RAM. Should work fine for 4GB as well:


This pulls around 5.4-5.6 MHs per card.

thats great

矿池卡住的问题没有解决，这币就很难发展，钱包的界面太大，不够美观，后续的开发是价值的提升，不要等到什么都准备好了再上平台，对以后的发展也不利，现在的更新太快，也许你还没准备好就已经被人超越。 Pool stuck does not solve the problem, this money is very difficult, wallet interface is too large, is not beautiful, follow-up development is to enhance the value of, don't wait for what all ready to a platform, it is also bad for the later development, now updated too fast, maybe you haven't prepared it has been beyond the.

money very difficult... solo works pretty well.
The new wallet is available already ?