<<  >> (p.512)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591480 times)

    • AzzAz
    Legendary
    *
    Offline Offline

    Activity: 1030
    Merit: 1006


    View Profile
    May 05, 2017, 05:21:33 PM
     #10221
    Quote from: rawbot on May 05, 2017, 04:55:07 PM
    Quote from: rawbot on May 05, 2017, 12:17:34 PM
    I have a spare 6 pin sata port on my EVGA supernova modular PSU.  If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?

    I really need an answer to this if anybody could help
    You can but power of it is same as SATA.And many connections are not good idea. Best is to cut wires and make it directly to 6 PIN

  • PPOC
    Hero Member
    *****
    Offline Offline

    Activity: 575
    Merit: 500



    View Profile
    May 05, 2017, 05:25:13 PM
     #10222
    Running latest 9.3 miner on a GTX1080 liquid cooled rig with an i7700. Running dual ETH and DCR, Miner starts fine and does 21 Eth and 210 Dcr. Always seams to be a 10X relationship between ETH and DCR. After 5-10 min, its start dropping slowly and levels off around 11 ETH and 110 DCR. Anyone have anything similar with 1080, 1070 or 1060?

    This also happens when I do ETH only, that starts out around 23 and slowly drops to 12 or so after 10m or so.

    Any help greatly appreciated!
    BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi
    "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."

  • AzzAz
    Legendary
    *
    Offline Offline

    Activity: 1030
    Merit: 1006


    View Profile
    May 05, 2017, 05:30:37 PM
     #10223
    Quote from: jackbox on May 05, 2017, 04:59:22 PM
    Quote from: AzzAz on May 05, 2017, 04:27:39 PM
    Quote from: jackbox on May 05, 2017, 02:44:23 PM
    Quote from: notbatman on May 05, 2017, 02:12:57 PM
    I seem to have an issue, well two issues.

    #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

    #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

    Code:
    00:23:58:748 3cff9700 parse packet: 236
    00:23:58:748 3cff9700 ETH: job changed
    00:23:58:748 3cff9700 new buf size: 0
    00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
    00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
    00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
    00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
    00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
    00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
    00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
    00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
    00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
    00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
    00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
    00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
    00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
    00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
    00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
    00:23:59:318 3cff9700 ETH: checking pool connection...
    00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:23:59:352 3cff9700 got 237 bytes
    00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:23:59:352 3cff9700 parse packet: 236
    00:23:59:352 3cff9700 ETH: job is the same
    00:23:59:352 3cff9700 new buf size: 0
    00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
    00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
    00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
    00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
    00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

    00:24:07:889 3cff9700 got 39 bytes
    00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}

    00:24:07:889 3cff9700 parse packet: 38
    00:24:07:889 3cff9700 new buf size: 0
    00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
    00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
    00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
    00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
    00:24:09:319 3cff9700 ETH: checking pool connection...
    00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:09:354 3cff9700 got 237 bytes
    00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:09:354 3cff9700 parse packet: 236
    00:24:09:354 3cff9700 ETH: job is the same
    00:24:09:354 3cff9700 new buf size: 0
    00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
    00:24:10:864 5544e700 DevFee: ETH round found 1 shares
    00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
    00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

    00:24:10:961 3bff7700 got 39 bytes
    00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}

    00:24:10:961 3bff7700 parse packet: 38
    00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!

    00:24:10:961 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 got 248 bytes
    00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

    00:24:10:980 3bff7700 parse packet: 247
    00:24:10:980 3bff7700 ETH: job changed
    00:24:10:980 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
    00:24:10:980 3bff7700 target: 0x0000000112e0be82
    00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
    00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
    00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
    00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:908 68a84740 Got incorrect temperature 511, ignore
    00:24:19:321 3cff9700 ETH: checking pool connection...
    00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:19:357 3cff9700 got 237 bytes
    00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:357 3cff9700 parse packet: 236
    00:24:19:357 3cff9700 ETH: job is the same
    00:24:19:357 3cff9700 new buf size: 0
    00:24:19:494 3cff9700 got 237 bytes
    00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:495 3cff9700 parse packet: 236
    00:24:19:495 3cff9700 ETH: job changed
    00:24:19:495 3cff9700 new buf size: 0
    00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
    00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
    00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
    00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:20:012 3bff7700 got 248 bytes
    00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}



    Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.
    Mind to share your reboot.bat file ?
    And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin...
    Your cards are overburdened.

    It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it.

    so your reboot.bat contains "shutdownrt 5f" ? Because that is where you pointed me.
    See, I try to be helpful sharing my experience with you. From other side you tell me to read OP?  Next time you ask for advice/help I will point you to page 1.

    @PPOC: Temps?

  • PPOC
    Hero Member
    *****
    Offline Offline

    Activity: 575
    Merit: 500



    View Profile
    May 05, 2017, 05:44:32 PM
     #10224
    Quote from: AzzAz on May 05, 2017, 05:30:37 PM
    Quote from: jackbox on May 05, 2017, 04:59:22 PM
    Quote from: AzzAz on May 05, 2017, 04:27:39 PM
    Quote from: jackbox on May 05, 2017, 02:44:23 PM
    Quote from: notbatman on May 05, 2017, 02:12:57 PM
    I seem to have an issue, well two issues.

    #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

    #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

    Code:
    00:23:58:748 3cff9700 parse packet: 236
    00:23:58:748 3cff9700 ETH: job changed
    00:23:58:748 3cff9700 new buf size: 0
    00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
    00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
    00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
    00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
    00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
    00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
    00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
    00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
    00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
    00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
    00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
    00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
    00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
    00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
    00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
    00:23:59:318 3cff9700 ETH: checking pool connection...
    00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:23:59:352 3cff9700 got 237 bytes
    00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:23:59:352 3cff9700 parse packet: 236
    00:23:59:352 3cff9700 ETH: job is the same
    00:23:59:352 3cff9700 new buf size: 0
    00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
    00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
    00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
    00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
    00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

    00:24:07:889 3cff9700 got 39 bytes
    00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}

    00:24:07:889 3cff9700 parse packet: 38
    00:24:07:889 3cff9700 new buf size: 0
    00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
    00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
    00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
    00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
    00:24:09:319 3cff9700 ETH: checking pool connection...
    00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:09:354 3cff9700 got 237 bytes
    00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:09:354 3cff9700 parse packet: 236
    00:24:09:354 3cff9700 ETH: job is the same
    00:24:09:354 3cff9700 new buf size: 0
    00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
    00:24:10:864 5544e700 DevFee: ETH round found 1 shares
    00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
    00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

    00:24:10:961 3bff7700 got 39 bytes
    00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}

    00:24:10:961 3bff7700 parse packet: 38
    00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!

    00:24:10:961 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 got 248 bytes
    00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

    00:24:10:980 3bff7700 parse packet: 247
    00:24:10:980 3bff7700 ETH: job changed
    00:24:10:980 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
    00:24:10:980 3bff7700 target: 0x0000000112e0be82
    00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
    00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
    00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
    00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:908 68a84740 Got incorrect temperature 511, ignore
    00:24:19:321 3cff9700 ETH: checking pool connection...
    00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:19:357 3cff9700 got 237 bytes
    00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:357 3cff9700 parse packet: 236
    00:24:19:357 3cff9700 ETH: job is the same
    00:24:19:357 3cff9700 new buf size: 0
    00:24:19:494 3cff9700 got 237 bytes
    00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:495 3cff9700 parse packet: 236
    00:24:19:495 3cff9700 ETH: job changed
    00:24:19:495 3cff9700 new buf size: 0
    00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
    00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
    00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
    00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:20:012 3bff7700 got 248 bytes
    00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}



    Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.
    Mind to share your reboot.bat file ?
    And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin...
    Your cards are overburdened.

    It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it.

    so your reboot.bat contains "shutdownrt 5f" ? Because that is where you pointed me.
    See, I try to be helpful sharing my experience with you. From other side you tell me to read OP?  Next time you ask for advice/help I will point you to page 1.

    @PPOC: Temps?

    Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad.
    BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi
    "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."

  • sundownz
    Hero Member
    *****
    Offline Offline

    Activity: 714
    Merit: 512


    View Profile WWW
    May 05, 2017, 05:53:51 PM
     #10225
    Quote from: jackbox on May 05, 2017, 02:57:42 PM
    Quote from: sundownz on May 05, 2017, 02:50:36 PM
    I got the dual mining working via Nicehash.

    I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.

    I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.

    Ideas on that ?

    What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares.

    Okay that must be it -- I have an older version.
    For security, your account has been locked. Email acctcomp15@theymos.e4ward.com

  • AzzAz
    Legendary
    *
    Offline Offline

    Activity: 1030
    Merit: 1006


    View Profile
    May 05, 2017, 06:03:47 PM
     #10226
    Quote from: PPOC on May 05, 2017, 05:44:32 PM
    Quote from: AzzAz on May 05, 2017, 05:30:37 PM
    Quote from: jackbox on May 05, 2017, 04:59:22 PM
    Quote from: AzzAz on May 05, 2017, 04:27:39 PM
    Quote from: jackbox on May 05, 2017, 02:44:23 PM
    Quote from: notbatman on May 05, 2017, 02:12:57 PM
    I seem to have an issue, well two issues.

    #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

    #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

    Code:
    00:23:58:748 3cff9700 parse packet: 236
    00:23:58:748 3cff9700 ETH: job changed
    00:23:58:748 3cff9700 new buf size: 0
    00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
    00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
    00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
    00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
    00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
    00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
    00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
    00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
    00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
    00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
    00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
    00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
    00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
    00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
    00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
    00:23:59:318 3cff9700 ETH: checking pool connection...
    00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:23:59:352 3cff9700 got 237 bytes
    00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:23:59:352 3cff9700 parse packet: 236
    00:23:59:352 3cff9700 ETH: job is the same
    00:23:59:352 3cff9700 new buf size: 0
    00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
    00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
    00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
    00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
    00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

    00:24:07:889 3cff9700 got 39 bytes
    00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}

    00:24:07:889 3cff9700 parse packet: 38
    00:24:07:889 3cff9700 new buf size: 0
    00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
    00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
    00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
    00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
    00:24:09:319 3cff9700 ETH: checking pool connection...
    00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:09:354 3cff9700 got 237 bytes
    00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:09:354 3cff9700 parse packet: 236
    00:24:09:354 3cff9700 ETH: job is the same
    00:24:09:354 3cff9700 new buf size: 0
    00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
    00:24:10:864 5544e700 DevFee: ETH round found 1 shares
    00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
    00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

    00:24:10:961 3bff7700 got 39 bytes
    00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}

    00:24:10:961 3bff7700 parse packet: 38
    00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!

    00:24:10:961 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 got 248 bytes
    00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

    00:24:10:980 3bff7700 parse packet: 247
    00:24:10:980 3bff7700 ETH: job changed
    00:24:10:980 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
    00:24:10:980 3bff7700 target: 0x0000000112e0be82
    00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
    00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
    00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
    00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:908 68a84740 Got incorrect temperature 511, ignore
    00:24:19:321 3cff9700 ETH: checking pool connection...
    00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:19:357 3cff9700 got 237 bytes
    00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:357 3cff9700 parse packet: 236
    00:24:19:357 3cff9700 ETH: job is the same
    00:24:19:357 3cff9700 new buf size: 0
    00:24:19:494 3cff9700 got 237 bytes
    00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:495 3cff9700 parse packet: 236
    00:24:19:495 3cff9700 ETH: job changed
    00:24:19:495 3cff9700 new buf size: 0
    00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
    00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
    00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
    00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:20:012 3bff7700 got 248 bytes
    00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}



    Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.
    Mind to share your reboot.bat file ?
    And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin...
    Your cards are overburdened.

    It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it.

    so your reboot.bat contains "shutdownrt 5f" ? Because that is where you pointed me.
    See, I try to be helpful sharing my experience with you. From other side you tell me to read OP?  Next time you ask for advice/help I will point you to page 1.

    @PPOC: Temps?

    Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad.
    Don't let them go over 70s. Get some serious cooling if you want to mine. Ditch the case.

  • sundownz
    Hero Member
    *****
    Offline Offline

    Activity: 714
    Merit: 512


    View Profile WWW
    May 05, 2017, 06:05:48 PM
     #10227
    Quote from: sundownz on May 05, 2017, 05:53:51 PM
    Quote from: jackbox on May 05, 2017, 02:57:42 PM
    Quote from: sundownz on May 05, 2017, 02:50:36 PM
    I got the dual mining working via Nicehash.

    I tried LBRY and also PASCAL but both of them slowed down my ETH mining substantially... by about 6 MH/s for either of them.

    I also tried DCR and it doesn't show any speed penalty... but is having 100% rejection rate.

    Ideas on that ?

    What version of the miner are you using? For DCR you can only use 9.2 and 9.3 due to header change. Earlier versions will only create invalid shares.

    Okay that must be it -- I have an older version.

    Yep... exactly it. I updated the miner in my Nicehash folder and Decred works now.

    Thanks!
    For security, your account has been locked. Email acctcomp15@theymos.e4ward.com

  • eth4lyfe
    Newbie
    *
    Offline Offline

    Activity: 70
    Merit: 0


    View Profile WWW
    May 05, 2017, 06:18:07 PM
     #10228
    Quote from: AzzAz on May 05, 2017, 06:03:47 PM
    Quote from: PPOC on May 05, 2017, 05:44:32 PM
    Quote from: AzzAz on May 05, 2017, 05:30:37 PM
    Quote from: jackbox on May 05, 2017, 04:59:22 PM
    Quote from: AzzAz on May 05, 2017, 04:27:39 PM
    Quote from: jackbox on May 05, 2017, 02:44:23 PM
    Quote from: notbatman on May 05, 2017, 02:12:57 PM
    I seem to have an issue, well two issues.

    #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

    #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

    Code:
    00:23:58:748 3cff9700 parse packet: 236
    00:23:58:748 3cff9700 ETH: job changed
    00:23:58:748 3cff9700 new buf size: 0
    00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
    00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
    00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
    00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
    00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
    00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
    00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
    00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
    00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
    00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
    00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
    00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
    00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
    00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
    00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
    00:23:59:318 3cff9700 ETH: checking pool connection...
    00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:23:59:352 3cff9700 got 237 bytes
    00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:23:59:352 3cff9700 parse packet: 236
    00:23:59:352 3cff9700 ETH: job is the same
    00:23:59:352 3cff9700 new buf size: 0
    00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
    00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
    00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
    00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
    00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

    00:24:07:889 3cff9700 got 39 bytes
    00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}

    00:24:07:889 3cff9700 parse packet: 38
    00:24:07:889 3cff9700 new buf size: 0
    00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
    00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
    00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
    00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
    00:24:09:319 3cff9700 ETH: checking pool connection...
    00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:09:354 3cff9700 got 237 bytes
    00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:09:354 3cff9700 parse packet: 236
    00:24:09:354 3cff9700 ETH: job is the same
    00:24:09:354 3cff9700 new buf size: 0
    00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
    00:24:10:864 5544e700 DevFee: ETH round found 1 shares
    00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
    00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

    00:24:10:961 3bff7700 got 39 bytes
    00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}

    00:24:10:961 3bff7700 parse packet: 38
    00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!

    00:24:10:961 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 got 248 bytes
    00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

    00:24:10:980 3bff7700 parse packet: 247
    00:24:10:980 3bff7700 ETH: job changed
    00:24:10:980 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
    00:24:10:980 3bff7700 target: 0x0000000112e0be82
    00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
    00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
    00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
    00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:908 68a84740 Got incorrect temperature 511, ignore
    00:24:19:321 3cff9700 ETH: checking pool connection...
    00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:19:357 3cff9700 got 237 bytes
    00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:357 3cff9700 parse packet: 236
    00:24:19:357 3cff9700 ETH: job is the same
    00:24:19:357 3cff9700 new buf size: 0
    00:24:19:494 3cff9700 got 237 bytes
    00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:495 3cff9700 parse packet: 236
    00:24:19:495 3cff9700 ETH: job changed
    00:24:19:495 3cff9700 new buf size: 0
    00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
    00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
    00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
    00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:20:012 3bff7700 got 248 bytes
    00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}



    Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.
    Mind to share your reboot.bat file ?
    And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin...
    Your cards are overburdened.

    It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it.

    so your reboot.bat contains "shutdownrt 5f" ? Because that is where you pointed me.
    See, I try to be helpful sharing my experience with you. From other side you tell me to read OP?  Next time you ask for advice/help I will point you to page 1.

    @PPOC: Temps?

    Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad.
    Don't let them go over 70s. Get some serious cooling if you want to mine. Ditch the case.

    I set my shutoff temp at 70*C lol, my rigs usually run around 55-60*C and I have an open air setup - http://imgur.com/a/33vZm

  • drrobert
    Full Member
    ***
    Offline Offline

    Activity: 129
    Merit: 100


    View Profile
    May 05, 2017, 06:25:16 PM
     #10229
    How to find right gpu with problem?
    i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.

  • sNaKeyz0r91
    Member
    **
    Offline Offline

    Activity: 131
    Merit: 10


    View Profile
    May 05, 2017, 06:41:36 PM
     #10230
    Hi Claymore,
    I have this error just before miner restarts. Sometimes after 50+ hours, sometimes after 20-30 hours of mining. I use Nicehash miner.
    This is a peak to the log file:

    [2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
    [2017-05-05 20:26:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
    [2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
    [2017-05-05 20:27:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 20000 ms
    [2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
    [2017-05-05 20:27:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 40000 ms
    [2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
    [2017-05-05 20:28:00] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 80000 ms
    [2017-05-05 20:28:25] [INFO] [NICEHASH] Balance get
    [2017-05-05 20:28:27] [INFO] [NICEHASH] SMA get
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] READ SPEED ZERO, will cool up
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 160000 ms
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] MAX cool time exceeded. RESTARTING
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Restarting miner..
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Shutting down miner
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill all miner processes for this instance:
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Nothing to kill [pid(24904)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Process with an Id of 24904 is not running.
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Trying to kill [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)]
    [2017-05-05 20:29:20] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Exception killing [pid(23228)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)], exMsg Access is denied
    [2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] Starting miner [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)]   -di 01 -dcri 20,20 -asm 2,2  -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal zzzxxxccc -mport 127.0.0.1:4000 -esm 3 -epsw x -allpools 1  -dcoin dcr  -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal cccxxxzzz -dbg -1
    [2017-05-05 20:29:35] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Starting cooldown checker
    [2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid(32164)|bin(bin_3rdparty\claymore_dual\EthDcrMiner64.exe)] Cooling UP, cool time is 10000 ms
    [2017-05-05 20:29:40] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
    [2017-05-05 20:29:45] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] GetSummary exception: No connection could be made because the target machine actively refused it 127.0.0.1:4000
    [2017-05-05 20:29:50] [INFO] [ClaymoreDual-MINER_ID(0)-DEVICE_IDs(0,1)] [pid

  • scryptr
    Legendary
    *
    Offline Offline

    Activity: 1798
    Merit: 1028



    View Profile WWW
    May 05, 2017, 07:00:34 PM
     #10231
    Quote from: rawbot on May 05, 2017, 04:55:07 PM
    Quote from: rawbot on May 05, 2017, 12:17:34 PM
    I have a spare 6 pin sata port on my EVGA supernova modular PSU.  If I buy a 6 pin male to 6 pin male modular cable, can I plug that into my PCIE riser to power it safely?

    I really need an answer to this if anybody could help

    THERE ARE NEW MODEL PCIE RISER CARDS--

    These new models have 6-pin female PCIe connectors on the upper component card, with the graphic -card slot.  It would be physically possible to use a male-male PSU PCIe cable to power the card, rather than a SATA-to-6-pin PCIe adapter supplied with the riser kit.

    1) I don't know the answer.
    2) The riser card was not designed that way.
    3) You could do ground-breaking research and try it on an old graphics card you no longer need.  Be sure to make a video of the process.

    It may very well work, the new riser cards have over-voltage protection.       --scryptr
    SCRYPTR'S NOTEBOOK: https://bt.irlbtc.com/view/5035515.msg46035530#msg46035530
    GITHUB: "github.com/scryptr"  MERIT is appreciated, also.  Thanks!

  • Elder III
    Sr. Member
    ****
    Offline Offline

    Activity: 1246
    Merit: 274


    View Profile
    May 05, 2017, 09:20:29 PM
     #10232
    Quote from: PPOC on May 05, 2017, 05:44:32 PM
    Quote from: AzzAz on May 05, 2017, 05:30:37 PM
    Quote from: jackbox on May 05, 2017, 04:59:22 PM
    Quote from: AzzAz on May 05, 2017, 04:27:39 PM
    Quote from: jackbox on May 05, 2017, 02:44:23 PM
    Quote from: notbatman on May 05, 2017, 02:12:57 PM
    I seem to have an issue, well two issues.

    #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

    #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.

    Code:
    00:23:58:748 3cff9700 parse packet: 236
    00:23:58:748 3cff9700 ETH: job changed
    00:23:58:748 3cff9700 new buf size: 0
    00:23:58:748 3cff9700 ETH: 05/05/17-00:23:58 - New job from musicoin.nomnom.technology:9999
    00:23:58:748 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:23:58:748 3cff9700 ETH - Total Speed: 98.703 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:02
    00:23:58:748 3cff9700 ETH: GPU0 15.153 Mh/s, GPU1 19.916 Mh/s, GPU2 21.565 Mh/s, GPU3 21.514 Mh/s, GPU4 20.555 Mh/s
    00:23:58:748 3cff9700 DCR - Total Speed: 5922.173 Mh/s, Total Shares: 1150, Rejected: 3
    00:23:58:748 3cff9700 DCR: GPU0 909.169 Mh/s, GPU1 1194.958 Mh/s, GPU2 1293.899 Mh/s, GPU3 1290.819 Mh/s, GPU4 1233.328 Mh/s
    00:23:58:888 68a84740 GPU0 t=62C fan=90%, GPU1 t=63C fan=84%, GPU2 t=61C fan=43%, GPU3 t=59C fan=40%, GPU4 t=62C fan=40%
    00:23:58:888 68a84740 em hbt: 1, dm hbt: 1, fm hbt: 1,
    00:23:58:888 68a84740 watchdog - thread 0, hb time 2758
    00:23:58:888 68a84740 watchdog - thread 1, hb time 2794
    00:23:58:888 68a84740 watchdog - thread 2, hb time 2801
    00:23:58:888 68a84740 watchdog - thread 3, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 4, hb time 2775
    00:23:58:889 68a84740 watchdog - thread 5, hb time 2799
    00:23:58:889 68a84740 watchdog - thread 6, hb time 2771
    00:23:58:889 68a84740 watchdog - thread 7, hb time 2796
    00:23:58:889 68a84740 watchdog - thread 8, hb time 2809
    00:23:58:889 68a84740 watchdog - thread 9, hb time 2783
    00:23:59:318 3cff9700 ETH: checking pool connection...
    00:23:59:318 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:23:59:352 3cff9700 got 237 bytes
    00:23:59:352 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:23:59:352 3cff9700 parse packet: 236
    00:23:59:352 3cff9700 ETH: job is the same
    00:23:59:352 3cff9700 new buf size: 0
    00:24:03:769 3dffb700 GPU4 DAG creation time - 5018 ms
    00:24:03:769 3dffb700 Setting DAG epoch #121 for GPU4 done
    00:24:03:769 3dffb700 DevFee: restart timer because of updating DAG
    00:24:03:769 5544e700 Setting DAG epoch #121 for GPU1
    00:24:07:855 3cff9700 send: {"id":6,"worker":"linux","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x139a9fb", "0x000000000000000000000000000000000000000000000000000000003a79d94e"]}

    00:24:07:889 3cff9700 got 39 bytes
    00:24:07:889 3cff9700 buf: {"id":6,"jsonrpc":"2.0","result":true}

    00:24:07:889 3cff9700 parse packet: 38
    00:24:07:889 3cff9700 new buf size: 0
    00:24:08:763 5544e700 GPU1 DAG creation time - 4894 ms
    00:24:08:763 5544e700 Setting DAG epoch #121 for GPU1 done
    00:24:08:763 5544e700 DevFee: restart timer because of updating DAG
    00:24:08:763 3f7fe700 Setting DAG epoch #121 for GPU2
    00:24:09:319 3cff9700 ETH: checking pool connection...
    00:24:09:319 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:09:354 3cff9700 got 237 bytes
    00:24:09:354 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:09:354 3cff9700 parse packet: 236
    00:24:09:354 3cff9700 ETH: job is the same
    00:24:09:354 3cff9700 new buf size: 0
    00:24:10:864 5544e700 ETH: put share nonce 289644a40270f06d
    00:24:10:864 5544e700 DevFee: ETH round found 1 shares
    00:24:10:864 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - SHARE FOUND - (GPU 1)
    00:24:10:864 3bff7700 send: {"id":4,"method":"eth_submitWork","params":["0x289644a40270f06d","0xd3fceb4972e2bb316d331c1ac07c817488888b6fbea6fca37f6bcce90a169121","0x479ed8ffc20b8e8989ea6ac9dd0d411f394bd07777174f2c774a65a4d2f5a815"]}

    00:24:10:961 3bff7700 got 39 bytes
    00:24:10:961 3bff7700 buf: {"id":4,"jsonrpc":"2.0","result":true}

    00:24:10:961 3bff7700 parse packet: 38
    00:24:10:961 3bff7700 ETH: Share accepted (96 ms)!

    00:24:10:961 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 got 248 bytes
    00:24:10:980 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0x2cf04207cd9afbc1e426cda6b5e286ca84d6986fe0f5aa063a7d398af9b661b5","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf46"]}

    00:24:10:980 3bff7700 parse packet: 247
    00:24:10:980 3bff7700 ETH: job changed
    00:24:10:980 3bff7700 new buf size: 0
    00:24:10:980 3bff7700 DevFee: ETH: 05/05/17-00:24:10 - New job from us1.ethpool.org:3333
    00:24:10:980 3bff7700 target: 0x0000000112e0be82
    00:24:13:879 3f7fe700 GPU2 DAG creation time - 5017 ms
    00:24:13:879 3f7fe700 Setting DAG epoch #121 for GPU2 done
    00:24:13:879 3f7fe700 DevFee: restart timer because of updating DAG
    00:24:13:879 3e7fc700 Setting DAG epoch #121 for GPU3
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:907 68a84740 Got incorrect temperature 511, ignore
    00:24:16:908 68a84740 Got incorrect temperature 511, ignore
    00:24:19:321 3cff9700 ETH: checking pool connection...
    00:24:19:321 3cff9700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    00:24:19:357 3cff9700 got 237 bytes
    00:24:19:357 3cff9700 buf: {"id":3,"jsonrpc":"2.0","result":["0xadeb49a0172a832df58961677253b80dbd44e1be76f0d1dc9743b9f55427fbe0","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:357 3cff9700 parse packet: 236
    00:24:19:357 3cff9700 ETH: job is the same
    00:24:19:357 3cff9700 new buf size: 0
    00:24:19:494 3cff9700 got 237 bytes
    00:24:19:495 3cff9700 buf: {"id":0,"jsonrpc":"2.0","result":["0x3c2c66c4303add4353de34af2e76d112c2907f95e17ebd94372d57484596e0e4","0x9b1ca7a86d339a3f175e48937848ac1cc012678e046b8c433a226d06f0f9bf9b","0x0225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"]}

    00:24:19:495 3cff9700 parse packet: 236
    00:24:19:495 3cff9700 ETH: job changed
    00:24:19:495 3cff9700 new buf size: 0
    00:24:19:495 3cff9700 ETH: 05/05/17-00:24:19 - New job from musicoin.nomnom.technology:9999
    00:24:19:495 3cff9700 target: 0x0000000225c17d04 (diff: 2000MH), epoch #13
    00:24:19:495 3cff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1080, Rejected: 2, Time: 06:03
    00:24:19:495 3cff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:495 3cff9700 DCR - Total Speed: 0.000 Mh/s, Total Shares: 1150, Rejected: 3
    00:24:19:495 3cff9700 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:19:910 68a84740 Got incorrect temperature 511, ignore
    00:24:20:012 3bff7700 got 248 bytes
    00:24:20:012 3bff7700 buf: {"id":0,"jsonrpc":"2.0","result":["0xe22b4abeb25b318936269369f09a2b7f3fee6ab4d84512e5d2490fc7444e1e5d","0x064ef82d7269405eb06162f7d33f2b6aa2a23741c9a0d06a648460e17b48ab4c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x37bf47"]}



    Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.
    Mind to share your reboot.bat file ?
    And- I had same "incorrect temp 511" log, riser was burning @ molex, yellow (12V ) pin...
    Your cards are overburdened.

    It is on the OP under the -r option. Claymore tells you what to put in the reboot.bat to execute a reboot. Just go to page 1 and the first post and look for it.

    so your reboot.bat contains "shutdownrt 5f" ? Because that is where you pointed me.
    See, I try to be helpful sharing my experience with you. From other side you tell me to read OP?  Next time you ask for advice/help I will point you to page 1.

    @PPOC: Temps?

    Temp runs 88-92, warmer then I'd like but don't think it throttles till 95. Suprised on the temp with an EK block on it with a 3 fan Rad.

    I'd not bother mining Eth+DCR with a GTX 1080, you will get much better results mining ZCASH on that GPU. ZCASH also runs cooler and uses less power, so that may solve your temperature issue as well as bringing in more $.

  • miner582
    Newbie
    *
    Offline Offline

    Activity: 41
    Merit: 0


    View Profile
    May 06, 2017, 12:41:03 AM
     #10233
    Newbie question, I have several rigs on linux running claymore without any problem, however I just install claymore on my PC and I cannot modify the gpu mem or core voltage on a R9 390 Powercolor 8G but I can OC the core via -cclock. Is this normal? I read on the web that I can change mem and undervolt using MSI AB but my card dont want to take the underclock. I am using Crisom 15.12. In the OP say that AMD block underclocking so that the reason for claymore miner to not accept -mclock but using MSI AB should I can?

    Thanks

  • jackbox
    Legendary
    *
    Offline Offline

    Activity: 1246
    Merit: 1024



    View Profile
    May 06, 2017, 01:29:56 AM
     #10234
    Quote from: drrobert on May 05, 2017, 06:25:16 PM
    How to find right gpu with problem?
    i have one gpu with problem with overclock #4 (my rig it is with 8 cards) i need to find the right gpu and fix it, there is any hardwareId or something to find it? or also i don't have idea stop fan then will be more easy find it.

    If you press a number in the command prompt window that GPU will stop mining. For example you press 0 and GPU0 will stop mining. You press 4 and GPU4 will stop mining. If you press the number again the miner will start mining again. So you can press all the numbers and stop them from mining one at a time. Then maybe you can figure out which one has the overclocking issue?
    Buy a Trezor and Protect your BTC, BCH, BTG, DASH, LTC, DGB, ZEC, ETH and ETC from hackers.
    If I was helpful please buy me a coffee BTC: 1DWK7vBaxcTC5Wd2nQwLGEoy8xdFVzGKLK  BTG: AWvN1iBqCUqG2tEh3XoVvRbdcGrAzfBBpW
    If I was helpful please buy me a burger DGB: DLASV6CUQpGtGSyaVz5FYuu5YxZ17MoGQz

  • RonRedactedSwanson
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    May 06, 2017, 02:21:40 AM
    Last edit: May 06, 2017, 04:12:59 AM by RonRedactedSwanson
     #10235
    New to Ether mining (I mine BTC with ASICs) I have tried several mining programs for Ether, including MinerGate, which was the first I tried using, which installed the DAG (I have a feeling this is my issue). Once the DAG was completed it let me use my CPU to mine but not my GPU. When I tried using Claymore, something seemingly similar happens and it gets "hung" on something. Here's a log of how far the miner gets before it gets stuck. Any advice would be greatly appreciated.

    21:56:59:179   2240   args: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 -epool us1.ethpool.org:3333 -ewal 0xaC7f2d537580beC57a90C684159425A462BAfc89 -epsw x -esm 1 -mode 1 -tt 80 -asm 0
    21:56:59:182   2240   
    21:56:59:185   2240   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
    21:56:59:187   2240   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      º
    21:56:59:190   2240   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    21:56:59:192   2240   
    21:56:59:395   2240   ETH: 1 pool is specified
    21:56:59:399   2240   Main Ethereum pool is us1.ethpool.org:3333
    21:56:59:513   2240   OpenCL platform: AMD Accelerated Parallel Processing
    21:56:59:517   2240   OpenCL initializing...

    21:56:59:519   2240   AMD Cards available: 2
    21:56:59:522   2240   GPU #0: Hawaii, 4096 MB available, 44 compute units
    21:56:59:526   2240   GPU #0 recognized as Radeon 290X
    21:56:59:529   2240   GPU #1: Hawaii, 4096 MB available, 44 compute units
    21:56:59:532   2240   GPU #1 recognized as Radeon 290X
    21:56:59:534   2240   POOL/SOLO version
    21:56:59:538   2240   b343
    21:56:59:540   2240   Platform: Windows
    21:56:59:579   2240   start building OpenCL program for GPU 0...
    21:56:59:759   2240   done
    21:56:59:977   2240   start building OpenCL program for GPU 1...


    EDIT: After some more forum searching, people hinted to outdated/missing OpenCL drivers (which I was quite sure I had installed), but after installing several updates and a new package it's now hashing.

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    May 06, 2017, 06:05:39 AM
    Last edit: May 06, 2017, 01:06:13 PM by notbatman
     #10236
    Quote from: jackbox on May 05, 2017, 02:44:23 PM
    Quote from: notbatman on May 05, 2017, 02:12:57 PM
    I seem to have an issue, well two issues.

    #1 the miner crashes/freezes after it exits or the watchdog restarts it and I can't figure out why.

    #2 here's a the log file of the GPUs halting and the miner restarting. Why did the GPUs stop, I can't figure out why? It crashed/froze after it restarted and I lost many hours of mining time.


    ** clip **


    Same things happens to me so I used "-r 1" with a reboot. bat and the miner reboots my computer instead of restarting and hanging.

    I'll give that a try if I can't narrow down the issue, maybe I got a bad riser or the psu is overloaded.

    Edit:

    Things going smoothly for a bit now, I believe it was too many risers on one power line. These RX cards draw too much from from the board/riser they need a second pcie connector IMO.

    Edit2:

    I can see from the pool it's hung up, guess it's not the riser power. OMG this is going to take hours to figure out...

  • 24core
    Sr. Member
    ****
    Offline Offline

    Activity: 582
    Merit: 250


    An Impressive Purely Anonymous Currency.


    View Profile WWW
    May 06, 2017, 06:27:39 AM
     #10237
    I have built two rigs to replace my old rig(7950) and they both have 5 x 580 MSI Gaming.

    I have two questions :-

    1)I have switched the mining address to Bitterx, as syncing eth is so time consuming - any comments ?

    2)The cards are pulling roughly 100 watts but I could tune more but need more time.  Does anyone mine with a 480/580 and mine a second coin ?

    Thanks in advance
    ||► Resources
    ► VoteCentral
    ► DeepVault    		████
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ██
    ████    		████
      ██
      ██
      ██
      ██
      ██
      ██
      ██
      ██
      ██
      ██
      ██
    ████

  • sundownz
    Hero Member
    *****
    Offline Offline

    Activity: 714
    Merit: 512


    View Profile WWW
    May 06, 2017, 12:12:08 PM
     #10238
    Quick question...

    Is there any way to get Nicehash to call on the Claymore Dual Miner using an nVidia card ?

    I've been able to do it on all of my AMD GPU systems no problem but the nVidia system calls on the standard "ethminer" in Nicehash and I cannot seem to get it to use Claymore.
    For security, your account has been locked. Email acctcomp15@theymos.e4ward.com

  • doru15
    Newbie
    *
    Offline Offline

    Activity: 2
    Merit: 0


    View Profile
    May 06, 2017, 12:20:48 PM
     #10239
    Hi, im new here. I use your mining client on a 6x470 rig.

    My configuration is:
    ASUS H170 PRO GAMING
    Intel Celeron G3900
    4GB DDR4 2133MHz
    120GB SATA SSD
    4x SAPPHIRE AMD Radeon RX 470 NITRO+ OC 8GB
    2x ASUS AMD Radeon RX 470 Strix OC 4GB
    Windows 10 x64
    16.9.2 crimson driver

    I updated BIOS to latest version and did this configurations: Above 4G decoding enabled, DMI max link speed Gen1 and PCIEX16_1 link speed Gen1. All went ok and i saw all 6 gpus, all mined ok (4 sapphire ~24MH/s and 2 asus ~21MH/s). After one restart one of my GPU speed was 4.2MH/s all time. In GPU-Z i see 0 MHz for GPU and Memory clocks.

    Here are some logs:
    Code:
    +----------------------------------------------------------------+
    ¦      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      ¦
    +----------------------------------------------------------------+

    ETH: 1 pool is specified
    Main Ethereum pool is eu1.ethermine.org:4444
    DCR: 0 pool is specified

    Catalyst 15.12 is REQUIRED for best performance and compatibility
    For Polaris cards, use latest drivers
    At least 16 GB of Virtual Memory is required for multi-GPU systems
    Make sure you defined GPU_MAX_ALLOC_PERCENT 100
    Be careful with overclocking, use default clocks for first tests
    Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool

    OpenCL initializing...

    AMD Cards available: 6
    GPU #0: Ellesmere, 8192 MB available, 32 compute units
    GPU #0 recognized as Radeon RX 470/570
    GPU #1: Ellesmere, 8192 MB available, 32 compute units
    GPU #1 recognized as Radeon RX 470/570
    GPU #2: Ellesmere, 8192 MB available, 32 compute units
    GPU #2 recognized as Radeon RX 470/570
    GPU #3: Ellesmere, 4096 MB available, 32 compute units
    GPU #3 recognized as Radeon RX 470/570
    GPU #4: Ellesmere, 4096 MB available, 32 compute units
    GPU #4 recognized as Radeon RX 470/570
    GPU #5: Ellesmere, 8192 MB available, 32 compute units
    GPU #5 recognized as Radeon RX 470/570
    POOL/SOLO version
    GPU #0: algorithm ASM
    GPU #1: algorithm ASM
    GPU #2: algorithm ASM
    GPU #3: algorithm ASM
    GPU #4: algorithm ASM
    GPU #5: algorithm ASM
    No NVIDIA CUDA GPUs detected.
    Total cards: 6
    ETH: Stratum - connecting to 'eu1.ethermine.org' <51.255.64.43> port 4444
    ETH: Stratum - Connected (eu1.ethermine.org:4444)
    No pool specified for Decred! Ethereum-only mining mode is enabled
    ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
    ETH: eth-proxy stratum mode
    Watchdog enabled
    Remote management (READ-ONLY MODE) is enabled on port 3333

    ETH: Authorized
    Setting DAG epoch #121...
    Setting DAG epoch #121 for GPU5
    Setting DAG epoch #121 for GPU0
    Create GPU buffer for GPU0
    Setting DAG epoch #121 for GPU3
    Create GPU buffer for GPU3
    Setting DAG epoch #121 for GPU4
    Create GPU buffer for GPU4
    Setting DAG epoch #121 for GPU1
    Create GPU buffer for GPU1
    Setting DAG epoch #121 for GPU2
    Create GPU buffer for GPU5
    Create GPU buffer for GPU2
    ETH: 05/05/17-16:56:23 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
    GPU0 DAG creation time - 5000 ms
    Setting DAG epoch #121 for GPU0 done
    GPU1 DAG creation time - 5011 ms
    Setting DAG epoch #121 for GPU1 done
    GPU5 DAG creation time - 5018 ms
    Setting DAG epoch #121 for GPU5 done
    GPU2 DAG creation time - 5028 ms
    Setting DAG epoch #121 for GPU2 done
    GPU3 DAG creation time - 5983 ms
    Setting DAG epoch #121 for GPU3 done
    ETH: 05/05/17-16:56:32 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 118.720 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ETH: GPU0 24.415 Mh/s, GPU1 24.456 Mh/s, GPU2 24.294 Mh/s, GPU3 21.109 Mh/s, GPU4 0.000 Mh/s, GPU5 24.446 Mh/s
    ETH: 05/05/17-16:56:33 - SHARE FOUND - (GPU 3)
    ETH: Share accepted (94 ms)!
    ETH: 05/05/17-16:56:36 - SHARE FOUND - (GPU 5)
    ETH: Share accepted (93 ms)!
    GPU4 DAG creation time - 15332 ms
    Setting DAG epoch #121 for GPU4 done
    GPU0 t=54C fan=38%, GPU1 t=35C fan=0%, GPU2 t=66C fan=27%, GPU3 t=63C fan=25%, GPU4 t=69C fan=33%, GPU5 t=57C fan=21%
    ETH: 05/05/17-16:57:04 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.160 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:00
    ETH: GPU0 24.463 Mh/s, GPU1 24.445 Mh/s, GPU2 24.364 Mh/s, GPU3 21.123 Mh/s, GPU4 4.301 Mh/s, GPU5 24.464 Mh/s
    ETH: 05/05/17-16:57:24 - SHARE FOUND - (GPU 1)
    ETH: Share accepted (62 ms)!
    GPU0 t=58C fan=56%, GPU1 t=38C fan=0%, GPU2 t=71C fan=41%, GPU3 t=69C fan=36%, GPU4 t=72C fan=38%, GPU5 t=65C fan=30%
    ETH: 05/05/17-16:57:42 - SHARE FOUND - (GPU 5)
    ETH: Share accepted (78 ms)!
    ETH: 05/05/17-16:57:46 - SHARE FOUND - (GPU 1)
    ETH: Share accepted (78 ms)!
    ETH: 05/05/17-16:58:09 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.223 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
    ETH: GPU0 24.444 Mh/s, GPU1 24.456 Mh/s, GPU2 24.469 Mh/s, GPU3 21.101 Mh/s, GPU4 4.301 Mh/s, GPU5 24.451 Mh/s
    ETH: 05/05/17-16:58:09 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 122.904 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
    ETH: GPU0 24.442 Mh/s, GPU1 24.464 Mh/s, GPU2 24.405 Mh/s, GPU3 21.079 Mh/s, GPU4 4.301 Mh/s, GPU5 24.214 Mh/s
    GPU0 t=60C fan=57%, GPU1 t=40C fan=0%, GPU2 t=74C fan=42%, GPU3 t=72C fan=39%, GPU4 t=74C fan=38%, GPU5 t=69C fan=35%
    ETH: 05/05/17-16:58:13 - SHARE FOUND - (GPU 3)
    ETH: Share accepted (78 ms)!
    ETH: 05/05/17-16:58:14 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 122.268 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
    ETH: GPU0 24.443 Mh/s, GPU1 24.439 Mh/s, GPU2 23.517 Mh/s, GPU3 21.096 Mh/s, GPU4 4.301 Mh/s, GPU5 24.472 Mh/s
    ETH: 05/05/17-16:58:16 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 122.650 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
    ETH: GPU0 24.443 Mh/s, GPU1 24.449 Mh/s, GPU2 24.412 Mh/s, GPU3 21.099 Mh/s, GPU4 4.301 Mh/s, GPU5 23.947 Mh/s
    ETH: 05/05/17-16:58:20 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.135 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:01
    ETH: GPU0 24.443 Mh/s, GPU1 24.462 Mh/s, GPU2 24.383 Mh/s, GPU3 21.097 Mh/s, GPU4 4.301 Mh/s, GPU5 24.448 Mh/s
    Code:
    +----------------------------------------------------------------+
    ¦      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      ¦
    +----------------------------------------------------------------+

    ETH: 1 pool is specified
    Main Ethereum pool is eu1.ethermine.org:4444
    DCR: 0 pool is specified

    Catalyst 15.12 is REQUIRED for best performance and compatibility
    For Polaris cards, use latest drivers
    At least 16 GB of Virtual Memory is required for multi-GPU systems
    Make sure you defined GPU_MAX_ALLOC_PERCENT 100
    Be careful with overclocking, use default clocks for first tests
    Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
    OpenCL initializing...

    AMD Cards available: 6
    GPU #0: Ellesmere, 8192 MB available, 32 compute units
    GPU #0 recognized as Radeon RX 470/570
    GPU #1: Ellesmere, 8192 MB available, 32 compute units
    GPU #1 recognized as Radeon RX 470/570
    GPU #2: Ellesmere, 4096 MB available, 32 compute units
    GPU #2 recognized as Radeon RX 470/570
    GPU #3: Ellesmere, 8192 MB available, 32 compute units
    GPU #3 recognized as Radeon RX 470/570
    GPU #4: Ellesmere, 8192 MB available, 32 compute units
    GPU #4 recognized as Radeon RX 470/570
    GPU #5: Ellesmere, 4096 MB available, 32 compute units
    GPU #5 recognized as Radeon RX 470/570
    POOL/SOLO version
    GPU #0: algorithm ASM
    GPU #1: algorithm ASM
    GPU #2: algorithm ASM
    GPU #3: algorithm ASM
    GPU #4: algorithm ASM
    GPU #5: algorithm ASM
    No NVIDIA CUDA GPUs detected.
    Total cards: 6
    ETH: Stratum - connecting to 'eu1.ethermine.org' <51.255.64.43> port 4444
    ETH: Stratum - Connected (eu1.ethermine.org:4444)
    No pool specified for Decred! Ethereum-only mining mode is enabled
    ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
    ETH: eth-proxy stratum mode
    ETH: Authorized
    Watchdog enabled
    Remote management (READ-ONLY MODE) is enabled on port 3333

    Setting DAG epoch #121...
    ETH: 05/05/17-17:03:03 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
    Setting DAG epoch #121 for GPU4
    Setting DAG epoch #121 for GPU5
    Setting DAG epoch #121 for GPU3
    Create GPU buffer for GPU3
    Setting DAG epoch #121 for GPU0
    Create GPU buffer for GPU0
    Setting DAG epoch #121 for GPU2
    Create GPU buffer for GPU2
    Create GPU buffer for GPU4
    Setting DAG epoch #121 for GPU1
    Create GPU buffer for GPU5
    Create GPU buffer for GPU1
    GPU0 DAG creation time - 4996 ms
    Setting DAG epoch #121 for GPU0 done
    GPU3 DAG creation time - 5012 ms
    Setting DAG epoch #121 for GPU3 done
    GPU1 DAG creation time - 5046 ms
    Setting DAG epoch #121 for GPU1 done
    GPU4 DAG creation time - 5072 ms
    Setting DAG epoch #121 for GPU4 done
    GPU5 DAG creation time - 5956 ms
    Setting DAG epoch #121 for GPU5 done
    GPU2 DAG creation time - 15361 ms
    Setting DAG epoch #121 for GPU2 done
    ETH: 05/05/17-17:03:27 - SHARE FOUND - (GPU 1)
    ETH: Share accepted (78 ms)!
    ETH: 05/05/17-17:03:29 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.174 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
    ETH: GPU0 24.448 Mh/s, GPU1 24.446 Mh/s, GPU2 4.302 Mh/s, GPU3 24.446 Mh/s, GPU4 24.432 Mh/s, GPU5 21.101 Mh/s
    GPU0 t=59C fan=56%, GPU1 t=48C fan=0%, GPU2 t=71C fan=34%, GPU3 t=70C fan=33%, GPU4 t=70C fan=35%, GPU5 t=68C fan=31%
    Code:
    +----------------------------------------------------------------+
    ¦      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      ¦
    +----------------------------------------------------------------+

    ETH: 1 pool is specified
    Main Ethereum pool is eu1.ethermine.org:4444
    DCR: 0 pool is specified

    Catalyst 15.12 is REQUIRED for best performance and compatibility
    For Polaris cards, use latest drivers
    At least 16 GB of Virtual Memory is required for multi-GPU systems
    Make sure you defined GPU_MAX_ALLOC_PERCENT 100
    Be careful with overclocking, use default clocks for first tests
    Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
    OpenCL initializing...

    AMD Cards available: 6
    GPU #0: Ellesmere, 8192 MB available, 32 compute units
    GPU #0 recognized as Radeon RX 470/570
    GPU #1: Ellesmere, 8192 MB available, 32 compute units
    GPU #1 recognized as Radeon RX 470/570
    GPU #2: Ellesmere, 4096 MB available, 32 compute units
    GPU #2 recognized as Radeon RX 470/570
    GPU #3: Ellesmere, 8192 MB available, 32 compute units
    GPU #3 recognized as Radeon RX 470/570
    GPU #4: Ellesmere, 8192 MB available, 32 compute units
    GPU #4 recognized as Radeon RX 470/570
    GPU #5: Ellesmere, 4096 MB available, 32 compute units
    GPU #5 recognized as Radeon RX 470/570
    POOL/SOLO version
    GPU #0: algorithm ASM
    GPU #1: algorithm ASM
    GPU #2: algorithm ASM
    GPU #3: algorithm ASM
    GPU #4: algorithm ASM
    GPU #5: algorithm ASM
    No NVIDIA CUDA GPUs detected.
    Total cards: 6
    ETH: Stratum - connecting to 'eu1.ethermine.org' <51.255.64.43> port 4444
    ETH: Stratum - Connected (eu1.ethermine.org:4444)
    No pool specified for Decred! Ethereum-only mining mode is enabled
    ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
    ETH: eth-proxy stratum mode
    Watchdog enabled
    Remote management (READ-ONLY MODE) is enabled on port 3333
    ETH: Authorized

    Setting DAG epoch #121...
    Setting DAG epoch #121 for GPU1
    Create GPU buffer for GPU1
    Setting DAG epoch #121 for GPU0
    Create GPU buffer for GPU0
    Setting DAG epoch #121 for GPU4
    Create GPU buffer for GPU4
    Setting DAG epoch #121 for GPU5
    Setting DAG epoch #121 for GPU2
    Setting DAG epoch #121 for GPU3
    Create GPU buffer for GPU5
    Create GPU buffer for GPU3
    Create GPU buffer for GPU2
    GPU0 DAG creation time - 4986 ms
    Setting DAG epoch #121 for GPU0 done
    GPU1 DAG creation time - 4972 ms
    Setting DAG epoch #121 for GPU1 done
    GPU4 DAG creation time - 4993 ms
    Setting DAG epoch #121 for GPU4 done
    GPU3 DAG creation time - 4986 ms
    Setting DAG epoch #121 for GPU3 done
    GPU5 DAG creation time - 5928 ms
    Setting DAG epoch #121 for GPU5 done
    GPU2 DAG creation time - 15269 ms
    Setting DAG epoch #121 for GPU2 done
    ETH: 05/06/17-03:46:23 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.465 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ETH: GPU0 24.508 Mh/s, GPU1 24.515 Mh/s, GPU2 4.288 Mh/s, GPU3 24.509 Mh/s, GPU4 24.500 Mh/s, GPU5 21.145 Mh/s
    GPU0 t=56C fan=46%, GPU1 t=42C fan=0%, GPU2 t=62C fan=22%, GPU3 t=60C fan=22%, GPU4 t=62C fan=24%, GPU5 t=60C fan=22%
    ETH: 05/06/17-03:46:52 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.148 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ETH: GPU0 24.459 Mh/s, GPU1 24.460 Mh/s, GPU2 4.301 Mh/s, GPU3 24.445 Mh/s, GPU4 24.385 Mh/s, GPU5 21.097 Mh/s
    ETH: 05/06/17-03:47:04 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 123.260 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
    ETH: GPU0 24.480 Mh/s, GPU1 24.487 Mh/s, GPU2 4.301 Mh/s, GPU3 24.444 Mh/s, GPU4 24.450 Mh/s, GPU5 21.098 Mh/s
    GPU0 t=59C fan=57%, GPU1 t=44C fan=0%, GPU2 t=69C fan=38%, GPU3 t=68C fan=35%, GPU4 t=69C fan=38%, GPU5 t=66C fan=33%

    I've tried other drivers, other risers, full OS reinstall and PC rebuild, no solution.
    What i know: first time all was ok, then something failed. The GPU connected on the first PCIE x16 port is doing that. Second PCIE x16 and all 4 PCIE x1 are ok.
    Can anyone advise me what to do to fix it?

  • salecz
    Full Member
    ***
    Offline Offline

    Activity: 189
    Merit: 100


    Od rodjenja mog....


    View Profile WWW
    May 06, 2017, 12:36:44 PM
     #10240
    Is there anyway for your next version to add maintenance fee?  So we can add % in miner for mining in own address because i have some rigs where i am administrator, and i want to get my % earning. Thanks a lot
    Pages: « 1 ... 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 [512] 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 ... 1409 »
      Print  
Page 511
Viewing Page: 512

IRLBTC™ © 2025 IRLBTC.com