<<  >> (p.541)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591469 times)

    • vapourminer
    Legendary
    *
    Offline Offline

    Activity: 4858
    Merit: 5315


    what is this "brake pedal" you speak of?


    View Profile
    May 23, 2017, 12:22:10 PM
     #10801
    Quote from: Maicol792 on May 23, 2017, 07:44:54 AM
    Hello, I have a rig whit 4 rx480 and 1 r9 390x ... what is the best amd driver for this rig? I have a problem whit amd driver afther 24 hours of mining rx480 error code 43 on win10 64bit ... why? Thanks for help me

    i believe 16.9 or 16.11 are the favorites for rx 4xx and r9 3xx series.

    turn driver updates OFF in win10.

  • stefen83
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    May 23, 2017, 12:24:47 PM
     #10802
    Quote from: supertux1 on May 22, 2017, 07:46:35 PM

    Yeah just one of my cards can't take v4 for whatever reason and I verified it stand-alone being the only card in the system, fan %100 and
    no volt drop to eliminate heat and lack of power as a cause - still fails. It takes the other bios just fine. (Lower quality RAM? Who knows.)


    One of my card is bad too, i tried to use v4drop, but it hangs anyway.
    So i use v4 for that card too, but have to lower the Mhz to 1950  Shocked to make it work. Its the only card which gives only 27mh/s...
    I think its some really bad RAM...

  • AriesIV10
    Legendary
    *
    Offline Offline

    Activity: 1260
    Merit: 1006


    Mine for a Bit


    View Profile WWW
    May 23, 2017, 03:29:01 PM
     #10803
    Quote from: cashen on May 23, 2017, 06:10:57 AM
    Quote from: AriesIV10 on May 22, 2017, 08:28:17 PM
    Does anyone have a solution to the first GPU1 not working?  I have swapped out GPUs, but GPU1 never works.  I have reduced to 5 GPUs, 4GPUs...but still GPU1 does not start.




    Check WattTool and see if the core clock dropped. If so, hit the set on the core clock table and it should jump back.


    I tried it but, the core clock was not low.  Any Other Solutions/Experiences?
    BTC Address (Donations):  3LepZAju88ZRuNVD4cS6Xv5hKyKrjvirkB     Website:  www.MintMining.com
    Email: Mining@MintMining.com      Power Supplies: https://bit.ly/2TtvdOR

  • jawil
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    May 23, 2017, 03:38:27 PM
     #10804
    Quote from: cashen on May 23, 2017, 01:17:06 AM
    Mow many shares should 190Mh/s get in 60 mins?

    With 155 MHs I get about 120-140 an hour.

  • muratizm
    Member
    **
    Offline Offline

    Activity: 84
    Merit: 10


    View Profile
    May 23, 2017, 03:57:09 PM
     #10805
    Quote from: Maicol792 on May 23, 2017, 07:44:54 AM
    Hello, I have a rig whit 4 rx480 and 1 r9 390x ... what is the best amd driver for this rig? I have a problem whit amd driver afther 24 hours of mining rx480 error code 43 on win10 64bit ... why? Thanks for help me

    Hi,
    latest (2017) radeon drives does not support modified vbios cards.
    either use 16.11.3 version (no need)
    or
    uninstall driver with DDU, reboot
    and then install latest relive driver 17.5.2, DON'T REBOOT
    Download this atikmdag-patcher-1.4.5 (GOOGLE IT)
    Run, it'll ask patch, choose YES.
    Now reboot, enjoy code-43 free mining.

  • OverEasy
    Sr. Member
    ****
    Offline Offline

    Activity: 301
    Merit: 251


    View Profile
    May 23, 2017, 04:06:02 PM
     #10806
    So I just built another rig. Same as all the others. Windows 10, Claymore 9.3 etc...
    Except on this build Claymore will not run! It starts, id's cards, gets to something about OpenCL and stops. No errors. Just ends.

    HERES THE KICKER!

    If I use NiceHash miner Claymore works just fine!

    WTH?

    So Claymore 3rd party app thru NH miner works fantastic.

    Claymore stand-a-lone fails every time. Even if I try to run it from the NH directory as a stand-a-lone it fails

    What the heck is up lol.

    Did I forget some .net thing? Don't think so but I must of missed something somewhere.

    Thanks for any help

  • muratizm
    Member
    **
    Offline Offline

    Activity: 84
    Merit: 10


    View Profile
    May 23, 2017, 04:07:58 PM
     #10807
    Quote from: OverEasy on May 23, 2017, 04:06:02 PM
    So I just built another rig. Same as all the others. Windows 10, Claymore 9.3 etc...
    Except on this build Claymore will not run! It starts, id's cards, gets to something about OpenCL and stops. No errors. Just ends.

    HERES THE KICKER!

    If I use NiceHash miner Claymore works just fine!

    WTH?

    So Claymore 3rd party app thru NH miner works fantastic.

    Claymore stand-a-lone fails every time. Even if I try to run it from the NH directory as a stand-a-lone it fails

    What the heck is up lol.

    Did I forget some .net thing? Don't think so but I must of missed something somewhere.

    Thanks for any help



    You know, you can easily check logs right?
    something like: 1495552799_log.txt
    just open with notepad and check what does it say, perhaps copy/paste here.

  • OverEasy
    Sr. Member
    ****
    Offline Offline

    Activity: 301
    Merit: 251


    View Profile
    May 23, 2017, 04:14:11 PM
     #10808
    I did enable logging and logs show nothing. No errors. Program just plain stops running when executed by itself.
    Here is log from 10 seconds ago I just tried it again -


    12:18:00:071   950   
    12:18:00:071   950   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
    12:18:00:087   950   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.3      º
    12:18:00:087   950   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    12:18:00:102   950   
    12:18:00:321   950   ETH: 1 pool is specified
    12:18:00:337   950   Main Ethereum pool is daggerhashimoto.usa.nicehash.com:3353
    12:18:00:368   950   DCR: 1 pool is specified
    12:18:00:384   950   Main Decred pool is decred.usa.nicehash.com:3354
    12:18:03:493   950   OpenCL platform: AMD Accelerated Parallel Processing
    12:18:03:524   950   OpenCL initializing...

    12:18:03:524   950   AMD Cards available: 2
    12:18:03:540   950   GPU #0: Ellesmere, 3072 MB available, 32 compute units
    12:18:03:555   950   GPU #0 recognized as Radeon RX 470/570
    12:18:03:555   950   GPU #1: Ellesmere, 3072 MB available, 32 compute units
    12:18:03:571   950   GPU #1 recognized as Radeon RX 470/570
    12:18:03:587   950   POOL/SOLO version
    12:18:03:618   950   b343
    12:18:03:618   950   Platform: Windows
    12:18:03:727   950   start building OpenCL program for GPU 0...

  • muratizm
    Member
    **
    Offline Offline

    Activity: 84
    Merit: 10


    View Profile
    May 23, 2017, 04:25:43 PM
     #10809
    OverEasy

    it seems nothing wrong, no idea why it does exit?
    perhaps add
    @pause

    end of Start.bat or whatever you're using to start claymore, so perhaps you can see reason of crash on screen instead of logfile.

  • SMOKEN
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    May 23, 2017, 05:57:35 PM
     #10810
    Hey can anyone help me. Im new to mining ETH and I have tried with claymore (the latest) and genoil miner. I have a 280x at 1070MHz and whatever I do I can't get it over 13.58 MH/s. What am I doing wrong?HuhHuhHuhHuh?? My system is win8.1 x64, amd crymson 15.12, 16 GB ram and an AMD 8350. Here are the settings in the .bat file of the genoil. I have no clue what is what but please help me understand what's going on. I think i should be getting closer to 20 MH/s?Huh The gpu is sitting below 60 C at all times, although whatever i do in crimson's overdrive i cannot change the clock speeds of anything, only the fan speed.......

    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100

    ethminer.exe --farm-recheck 1000 -G -S eth-eu1.nanopool.org:9999 -FS eth-eu2.nanopool.org:9999 -O wallet_address.280X/email@mail.com

  • Xiadas
    Full Member
    ***
    Offline Offline

    Activity: 322
    Merit: 100


    Blockchain Just Entered The Real World


    View Profile
    May 23, 2017, 06:01:22 PM
     #10811
    Quote from: SMOKEN on May 23, 2017, 05:57:35 PM
    Hey can anyone help me. Im new to mining ETH and I have tried with claymore (the latest) and genoil miner. I have a 280x at 1070MHz and whatever I do I can't get it over 13.58 MH/s. What am I doing wrong?HuhHuhHuhHuh?? My system is win8.1 x64, amd crymson 15.12, 16 GB ram and an AMD 8350. Here are the settings in the .bat file of the genoil. I have no clue what is what but please help me understand what's going on. I think i should be getting closer to 20 MH/s?Huh

    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100

    ethminer.exe --farm-recheck 1000 -G -S eth-eu1.nanopool.org:9999 -FS eth-eu2.nanopool.org:9999 -O wallet_address.280X/email@mail.com


    To be honest, if you have the 280x, it is much profitable to mine the ZEC.

  • va23boam
    Member
    **
    Offline Offline

    Activity: 88
    Merit: 10


    View Profile
    May 23, 2017, 06:25:28 PM
     #10812
    Is there any way to have claymore dual ignore the intergrated grapics (a10 with intergrated r7 gpu)

    I want to use the intergrated as a display and not mine with it, and only mine with the 4x rx 470s I have in there. I no other miners have options to disable mining of certain gpus.. any help would be grouse
    Currently Mining: BTC,ETH,SC

  • patricken
    Newbie
    *
    Offline Offline

    Activity: 47
    Merit: 0


    View Profile
    May 23, 2017, 06:35:43 PM
     #10813
    Quote from: va23boam on May 23, 2017, 06:25:28 PM
    Is there any way to have claymore dual ignore the intergrated grapics (a10 with intergrated r7 gpu)

    I want to use the intergrated as a display and not mine with it, and only mine with the 4x rx 470s I have in there. I no other miners have options to disable mining of certain gpus.. any help would be grouse

    Can you try the -di?

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    May 23, 2017, 07:37:21 PM
     #10814
    Quote from: wpsd on May 23, 2017, 12:05:15 PM
    Hi Claymore

    could you give a hint on how to read value given by API {"method":"miner_getfile", "params":["config.txt"]}
    It's either encrypted or encoded

    Simple hex-encoded, for example, string data "3031" means two bytes: 48 and 49.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • OverEasy
    Sr. Member
    ****
    Offline Offline

    Activity: 301
    Merit: 251


    View Profile
    May 23, 2017, 09:11:29 PM
     #10815
    Quote from: muratizm on May 23, 2017, 04:25:43 PM
    OverEasy

    it seems nothing wrong, no idea why it does exit?
    perhaps add
    @pause

    end of Start.bat or whatever you're using to start claymore, so perhaps you can see reason of crash on screen instead of logfile.

    Just tried that. Same results. Nothing logged or on screen.
    A real mystery.

  • xleejohnx
    Hero Member
    *****
    Offline Offline

    Activity: 672
    Merit: 500


    View Profile
    May 23, 2017, 09:35:07 PM
     #10816
    Has the nicehash siacoin stratum been fixed?
    As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957

  • bwickstrom
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    May 23, 2017, 09:54:46 PM
     #10817
    Why can't I push my system harder? I have an open air case, H81 BTC v.2 motherboard, celeron processor, 8 gb ram, (6) XFX RX480 8GB Black Edition Cards, 2 power supplies. I have modded my bios copying the 1750 timing strap to the 2000. The max I can get per card is 27 mb/s for a total of 162 mb/s. There is a big difference in profit per year at 162 mb/s vs. 180 mb/s. I am using Claymore ver. 9.3 on Windows 10. The AMD Driver version is 16.12.2. Whenever I move my core clock past 1150 or the memory clock past 1950 the miner crashes within the hour. Any suggestions?

    Thanks,

    Brian

  • xleejohnx
    Hero Member
    *****
    Offline Offline

    Activity: 672
    Merit: 500


    View Profile
    May 23, 2017, 11:17:20 PM
     #10818
    Quote from: bwickstrom on May 23, 2017, 09:54:46 PM
    Why can't I push my system harder? I have an open air case, H81 BTC v.2 motherboard, celeron processor, 8 gb ram, (6) XFX RX480 8GB Black Edition Cards, 2 power supplies. I have modded my bios copying the 1750 timing strap to the 2000. The max I can get per card is 27 mb/s for a total of 162 mb/s. There is a big difference in profit per year at 162 mb/s vs. 180 mb/s. I am using Claymore ver. 9.3 on Windows 10. The AMD Driver version is 16.12.2. Whenever I move my core clock past 1150 or the memory clock past 1950 the miner crashes within the hour. Any suggestions?

    Thanks,

    Brian

    why did you copy the 1750 strap to the 2000?
    thats like throwing a hot dog down a hallway
    As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957

  • aarons6
    Legendary
    *
    Offline Offline

    Activity: 1736
    Merit: 1006


    View Profile
    May 23, 2017, 11:34:36 PM
     #10819
    Quote from: xleejohnx on May 23, 2017, 11:17:20 PM
    Quote from: bwickstrom on May 23, 2017, 09:54:46 PM
    Why can't I push my system harder? I have an open air case, H81 BTC v.2 motherboard, celeron processor, 8 gb ram, (6) XFX RX480 8GB Black Edition Cards, 2 power supplies. I have modded my bios copying the 1750 timing strap to the 2000. The max I can get per card is 27 mb/s for a total of 162 mb/s. There is a big difference in profit per year at 162 mb/s vs. 180 mb/s. I am using Claymore ver. 9.3 on Windows 10. The AMD Driver version is 16.12.2. Whenever I move my core clock past 1150 or the memory clock past 1950 the miner crashes within the hour. Any suggestions?

    Thanks,

    Brian

    why did you copy the 1750 strap to the 2000?
    thats like throwing a hot dog down a hallway

    i havent tried it myself but i was under the impression the straps get looser as they get higher, so copying the 1750 one to 2000 tightens it up and makes the ram faster?

  • bwickstrom
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    May 24, 2017, 12:13:31 AM
     #10820
    Quote from: aarons6 on May 23, 2017, 11:34:36 PM
    Quote from: xleejohnx on May 23, 2017, 11:17:20 PM
    Quote from: bwickstrom on May 23, 2017, 09:54:46 PM
    Why can't I push my system harder? I have an open air case, H81 BTC v.2 motherboard, celeron processor, 8 gb ram, (6) XFX RX480 8GB Black Edition Cards, 2 power supplies. I have modded my bios copying the 1750 timing strap to the 2000. The max I can get per card is 27 mb/s for a total of 162 mb/s. There is a big difference in profit per year at 162 mb/s vs. 180 mb/s. I am using Claymore ver. 9.3 on Windows 10. The AMD Driver version is 16.12.2. Whenever I move my core clock past 1150 or the memory clock past 1950 the miner crashes within the hour. Any suggestions?

    Thanks,

    Brian

    why did you copy the 1750 strap to the 2000?
    thats like throwing a hot dog down a hallway

    i havent tried it myself but i was under the impression the straps get looser as they get higher, so copying the 1750 one to 2000 tightens it up and makes the ram faster?


    That's what I read too, in multiple forums. Doing so increased my Mb/s from 24 to 27. What do you suggest instead xleejohnx? I would like to be at 30 mb/s and as I stated, I can't get there.
     
    Pages: « 1 ... 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 [541] 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 ... 1410 »
      Print  
Page 540
Viewing Page: 541

IRLBTC™ © 2025 IRLBTC.com