<<  >> (p.230)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591449 times)

    • peoples
    Member
    **
    Offline Offline

    Activity: 82
    Merit: 11


    View Profile
    August 07, 2016, 09:52:19 PM
     #4581
    @Claymore

    with new AMDGPU-PRO (16.30.3) and ubuntu 16.04 (also on 14.04 LTS) following error every second while mining.

    Code:
    Aug  6 03:02:46 114d7b kernel: [   60.412106] VM fault (0x01, vmid 6) at page 135290808, read from 'TC0' (0x54433000) (8)
    Aug  6 03:02:46 114d7b kernel: [   60.412109] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0df8c401
    Aug  6 03:02:46 114d7b kernel: [   60.412617] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105FBC
    Aug  6 03:02:46 114d7b kernel: [   60.413136] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001
    Aug  6 03:02:46 114d7b kernel: [   60.413648] VM fault (0x01, vmid 6) at page 135290812, read from 'TC4' (0x54433400) (72)
    Aug  6 03:02:46 114d7b kernel: [   60.413651] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0de08401
    Aug  6 03:02:46 114d7b kernel: [   60.414160] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105FBF
    Aug  6 03:02:46 114d7b kernel: [   60.414679] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C084001
    Aug  6 03:02:46 114d7b kernel: [   60.415189] VM fault (0x01, vmid 6) at page 135290815, read from 'TC7' (0x54433700) (132)

    is this something you can fix in your miner ?
    Cause genoils ethminer ( https://github.com/Genoil/cpp-ethereum/tree/110 ) adressed this issue in his miner.

    thanks
    regards

  • Boojapho
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 1


    View Profile
    August 07, 2016, 09:56:44 PM
     #4582
    When trying to use CDM solo with the Parity client (version 1.2.3), I am getting a JSON error when it calls eth_GetWork.  Below is the log.  Anyone have any ideas what could be going wrong?  I've tried -esm settings but they did not help.


    Code:
    17:43:13:974 125c ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
    17:43:13:990 125c º      Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.3 Beta      º
    17:43:13:990 125c ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    17:43:13:990 125c
    17:43:14:224 125c ETH: 1 pool is specified
    17:43:14:224 125c Main Ethereum pool is localhost:8545
    17:43:14:224 125c DCR: 1 pool is specified
    17:43:14:240 125c Main Decred pool is stratum.decredpool.org:3333
    17:43:21:962 125c OpenCL platform: AMD Accelerated Parallel Processing
    17:43:21:962 125c
    Cards available: 2
    17:43:21:962 125c GPU #0: name: Hawaii, 4096 MB available, 44 compute units
    17:43:21:962 125c GPU #1: name: Hawaii, 4096 MB available, 44 compute units
    17:43:21:962 125c Total cards: 2
    17:43:21:977 125c Initializing...

    17:43:21:977 125c GPU #0 recognized as Radeon 290X
    17:43:21:977 125c GPU #1 recognized as Radeon 290X
    17:43:21:977 125c POOL/SOLO version
    17:43:21:977 125c b176
    17:43:21:993 125c start building OpenCL program...
    17:43:24:848 125c done
    17:43:24:848 125c GPU #0: set -etha as 0 (ETH algo for fast cards)
    17:43:24:848 125c GPU #1: set -etha as 0 (ETH algo for fast cards)
    17:43:25:113 96c ETH - connecting to localhost:8545
    17:43:25:113 96c http send request: {"method": "eth_getWork", "params": [], "id":0}
    17:43:25:144 96c http got answer: {"jsonrpc":"2.0","error":{"code":-32600,"message":"Invalid request","data":null},"id":null}

    17:43:25:144 96c ETH: Connected (localhost:8545)
    17:43:25:144 96c parse packet: 91
    17:43:25:144 96c ETH: Received error: {"jsonrpc":"2.0","error":{"code":-32600,"message":"Invalid request","data":null},"id":null}

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    August 07, 2016, 10:02:39 PM
     #4583
    Quote from: peoples on August 07, 2016, 09:52:19 PM
    @Claymore

    with new AMDGPU-PRO (16.30.3) and ubuntu 16.04 (also on 14.04 LTS) following error every second while mining.

    is this something you can fix in your miner ?
    Cause genoils ethminer ( https://github.com/Genoil/cpp-ethereum/tree/110 ) adressed this issue in his miner.

    thanks
    regards

    I don't like Linux. If you know how Genoil fixed it, let me know and I will do the same. But I will not install "AMDGPU-PRO (16.30.3) and ubuntu 16.04 (also on 14.04 LTS)" to try to reproduce it and then try to find the reason, sorry.

    Quote from: Boojapho on August 07, 2016, 09:56:44 PM
    When trying to use CDM solo with the Parity client (version 1.2.3), I am getting a JSON error when it calls eth_GetWork.  Below is the log.  Anyone have any ideas what could be going wrong?  I've tried -esm settings but they did not help.

    Probably, solo with Parity is not supported currently. I tried to install latest client, but it even does not want to download blockchain for some reason (spent a couple of hours with no success), so I cannot check the reason.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • TR8888
    Hero Member
    *****
    Offline Offline

    Activity: 525
    Merit: 500


    View Profile
    August 07, 2016, 11:34:25 PM
     #4584
    We appreciate your work Claymore.

  • vapourminer
    Legendary
    *
    Offline Offline

    Activity: 4858
    Merit: 5285


    what is this "brake pedal" you speak of?


    View Profile
    August 08, 2016, 12:29:47 AM
     #4585
    Quote from: kilo17 on August 07, 2016, 09:03:02 AM
    Quote from: dmwardjr on August 06, 2016, 11:41:25 PM
    Quote from: Meech on August 05, 2016, 05:20:39 PM
    Good info. may be why I could get the 16x - 8x slots working but not the 1x.  Would be nice to fill the rig beyond 4 cards.  Thanks..  will give it a try.

    You're welcome.  I believe it's the same for you as well with only 4 cards.  Switching it to x8/x4/x4 should get the job done.  I would not have known either without a good friend of mine providing the info.

    EDIT:  Not sure of what mobo you have.  Don't forget to "save" the settings after you change them before exiting out of it.

    Blind leading the blind-  Tongue Changing the 16x slots to 8/4/4 will do absolutely nothing for this problem.

    There are a lot of things that can cause that issue but that is not it.  The lanes are decided by the mobo and more importantly the Chipset on the mobo.

    What mobo is being used?  Also what type of risers are being used?  Have you tried reinstalling the driver with all the GPU's connected?  Have you looked in the Device Manager to see how many are being recognized?

    some mobos will disable certain slots depending on what other slots are used. for example my gigabyte z97x mobo will disable the 3 x1 slots if the x4 (x16 physical) slot has a card in it.

  • ichigominer
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    August 08, 2016, 04:55:17 AM
     #4586

    Hey Claymore, thanks for your  development work of the dual miner.

    - I want to know if you are adding the connection to Suprnova mining stratum SIAcoin ( stratum + tcp:/sia.suprnova.cc : 2786 ), the pool has a 20 % bonus for each block.

    -Can you create a log folder to put all mining log files?

    Thanks for your attention

  • alfaris
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    August 09, 2016, 12:00:03 AM
     #4587
    Hi Claymore,

    i get with R9 280x 15.5Mh only not 20Mh
    How can i improve it  ?

  • adaseb
    Legendary
    *
    Offline Offline

    Activity: 4032
    Merit: 1760



    View Profile
    August 09, 2016, 12:00:27 AM
     #4588
    Quote from: alfaris on August 09, 2016, 12:00:03 AM
    Hi Claymore,

    i get with R9 280x 15.5Mh only not 20Mh
    How can i improve it  ?

    Its normal for 280x.
     
     RAZED      		| 
     100% 
    WELCOME
    BONUS
    		│
    █████████████████████
    █████████████████████████
    ████████████▀░░░░▀███████
    ██████████▀░░▄▀▀▄░░▀█████
    ██████████▄▄██▄▄██▄░▀████
    █████▀░░░░░░░▀██░░█░░████
    ████░░████▀▀█░░██▀░░▄████
    ████░░████▄▄█░░█░░▄██████
    ████░░█▀▀████░░██████████
    ████░░█▄▄███▀░░██████████
    █████▄░░░░░░░▄███████████
    █████████████████████████
    █████████████████████
    █████████████████████
    █████████████████████████
    ██████████▀▀░░░░░▀▀██████
    ████████▀░░▄▄█░░▀▄░░█████
    ██████▀░░▄█████▄░░▀░░████
    █████░░▄████▄▀░░█▄▄░░████
    ████░░▄███▄▀░░▄▀██▀░░████
    ████░░▀▀██░░▄▀███▀░░█████
    ████░░▄░░▀█████▀░░▄██████
    █████░░▀▄░░█▀▀░░▄████████
    ██████▄▄░░░░░▄▄██████████
    █████████████████████████
    █████████████████████
    		| 
     NO 
    KYC
    		| 
      RAZE THE LIMITS   ► PLAY NOW     

  • scryptr
    Legendary
    *
    Offline Offline

    Activity: 1798
    Merit: 1028



    View Profile WWW
    August 09, 2016, 04:08:41 AM
     #4589
    Quote from: adaseb on August 09, 2016, 12:00:27 AM
    Quote from: alfaris on August 09, 2016, 12:00:03 AM
    Hi Claymore,

    i get with R9 280x 15.5Mh only not 20Mh
    How can i improve it  ?

    Its normal for 280x.


    DEPENDING HOW HOT YOUR ROOM IS--

    280X cards run hot and eat power.  If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card.   If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2  and give your 280X cards more room to breathe; they will run faster  and at lower temperature.  If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card.  A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking.  If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F.  If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling.  My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller.

    All of this and more is in the README!!!.txt file, you should study it.       --scryptr
    SCRYPTR'S NOTEBOOK: https://bt.irlbtc.com/view/5035515.msg46035530#msg46035530
    GITHUB: "github.com/scryptr"  MERIT is appreciated, also.  Thanks!

  • citronick
    Legendary
    *
    Offline Offline

    Activity: 1834
    Merit: 1080


    ---- winter*juvia -----


    View Profile
    August 09, 2016, 04:42:28 AM
     #4590
    Quote from: scryptr on August 09, 2016, 04:08:41 AM
    Quote from: adaseb on August 09, 2016, 12:00:27 AM
    Quote from: alfaris on August 09, 2016, 12:00:03 AM
    Hi Claymore,

    i get with R9 280x 15.5Mh only not 20Mh
    How can i improve it  ?

    Its normal for 280x.


    DEPENDING HOW HOT YOUR ROOM IS--

    280X cards run hot and eat power.  If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card.   If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2  and give your 280X cards more room to breathe; they will run faster  and at lower temperature.  If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card.  A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking.  If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F.  If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling.  My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller.

    All of this and more is in the README!!!.txt file, you should study it.       --scryptr

    scryptr - will the Stilt BIOS help maximize 280/280x for ETH mining? Thanks
    If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...

  • alfaris
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    August 09, 2016, 05:18:50 AM
     #4591
    Quote from: scryptr on August 09, 2016, 04:08:41 AM
    Quote from: adaseb on August 09, 2016, 12:00:27 AM
    Quote from: alfaris on August 09, 2016, 12:00:03 AM
    Hi Claymore,

    i get with R9 280x 15.5Mh only not 20Mh
    How can i improve it  ?

    Its normal for 280x.


    DEPENDING HOW HOT YOUR ROOM IS--

    280X cards run hot and eat power.  If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card.   If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2  and give your 280X cards more room to breathe; they will run faster  and at lower temperature.  If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card.  A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking.  If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F.  If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling.  My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller.

    All of this and more is in the README!!!.txt file, you should study it.       --scryptr

    after research i overclocking core clock to 1100
    and memory clock to 1600

    i get 18.5Mh but run very hot 75c

    can i get better hash rate if i overclock higher ?

    and thanks for this info ..

  • aleixoto
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    August 09, 2016, 05:44:56 AM
    Last edit: August 09, 2016, 05:59:36 AM by aleixoto
     #4592
    Quote from: alfaris on August 09, 2016, 05:18:50 AM
    Quote from: scryptr on August 09, 2016, 04:08:41 AM
    Quote from: adaseb on August 09, 2016, 12:00:27 AM
    Quote from: alfaris on August 09, 2016, 12:00:03 AM
    Hi Claymore,

    i get with R9 280x 15.5Mh only not 20Mh
    How can i improve it  ?

    Its normal for 280x.


    DEPENDING HOW HOT YOUR ROOM IS--

    280X cards run hot and eat power.  If your cards are overheating, you may need to downclock, and earn 15-16MH/s per card.   If you set "-dcri 15" in your config, you will reduce the intensty of your secondary coin by 1/2  and give your 280X cards more room to breathe; they will run faster  and at lower temperature.  If you set "-cclock 1100", you will overclock your card, increase the hash rate, and increase the temperature of the card.  A core clock of 1100 may not be stable for your card/rig, you have to check postings by other miners regarding overclocking.  If you set "-tt 87", your card will self regulate, attempting to keep the temperature at or below 87 deg F.  If you are in a hot room, your hash may be 15-16MH/s because of temperature throttling.  My 280X cards made 22MH/s last winter, when the room was cooler, and the difficulty lower, and the DAG smaller.

    All of this and more is in the README!!!.txt file, you should study it.       --scryptr

    after research i overclocking core clock to 1100
    and memory clock to 1600

    i get 18.5Mh but run very hot 75c

    can i get better hash rate if i overclock higher ?

    and thanks for this info ..

    me too but not is for temperatue....

    i have 1x R9 280x Sapphire  win 7 x64 claymore 5.3 driver 15.12 and set overclocking to 1100/1600 powelimit 20, -dcri 60 -ethi 16 i get 17.2 M'hs ETH and 517 m'hs SIA. dual miner

    when i dont use overclock i get 15 M'hs eth and 240 mhs sia


    i test to use ethOS distribution linux and get 17mhs max..


    why people can mine with 20mhs and i cant?Huh?

    Thanks rep++

  • chup
    Sr. Member
    ****
    Offline Offline

    Activity: 737
    Merit: 262


    Me, Myself & I


    View Profile
    August 09, 2016, 06:12:11 AM
     #4593
    Quote from: aleixoto on August 09, 2016, 05:44:56 AM

    me too but not is for temperatue....

    i have 1x R9 280x Sapphire  win 7 x64 claymore 5.3 driver 15.12 and set overclocking to 1100/1600 powelimit 20, -dcri 60 -ethi 16 i get 17.2 M'hs ETH and 517 m'hs SIA. dual miner

    when i dont use overclock i get 15 M'hs eth and 240 mhs sia


    i test to use ethOS distribution linux and get 17mhs max..


    why people can mine with 20mhs and i cant?Huh?

    Thanks rep++

    Decrease -dcri to values between 40 and 50. You can do that during mining using "+" and "-" keys to find your sweet spot of dcri value.

    EDIT: edited messed quotations
    MEGABONUS 🔥  up to 8.25% 🔥  CASHBACK at ALIEXPRESS, 🔥 $10.45  🔥  at AIRBNB...

  • willi9974
    Legendary
    *
    Offline Offline

    Activity: 3976
    Merit: 3588



    View Profile
    August 09, 2016, 06:17:31 AM
     #4594
    what for keys and functions are during the mining possible?

    + and - are new for me... i know only s for statistics

  • allcoinminer
    Hero Member
    *****
    Offline Offline

    Activity: 784
    Merit: 504


    View Profile
    August 09, 2016, 09:29:37 AM
     #4595
    Set core clock speed to 1175 and memory clock speed to 1500.
    You should get around 20Mhs. Also try setting -etho to 0.
    Lower core clock speed if it crashes.
    I did another tweak and I'm getting around 26Mhs. But need to check how stable it is.

  • allcoinminer
    Hero Member
    *****
    Offline Offline

    Activity: 784
    Merit: 504


    View Profile
    August 09, 2016, 09:35:55 AM
     #4596
    The proper method for finding the sweet spot is as below.
    1) First reset your graphic cards/miner settings to GPUs default clock settings.
    2) Restart your computer, run the miner and using any third party apps like, msi afterburner or others,
    increase the the memory clock slowly in 50s. Keep moving till the miner crashes.
    3) Then set the memory clock to max where the miner runs without crashing.
    4) Start slowly increasing the clock speed and find the sweet spot where you get max hashrate without crash.
    After this you may play with integrity. Note: Always run the GPU for some time to check for crash.

  • clipto
    Member
    **
    Offline Offline

    Activity: 311
    Merit: 10


    View Profile
    August 09, 2016, 10:04:03 AM
     #4597
    If you pay for electricity, I would add downvolting.
    ETH/ETC algo is perfect for keeping hashrate at lower voltages. (and lower electricity bills)

  • elzium
    Member
    **
    Offline Offline

    Activity: 96
    Merit: 10


    View Profile
    August 09, 2016, 10:30:17 AM
     #4598
    I agree on that, added power cost is not worth added hashrate on 280x. Go for lowest stable voltage and be cool. I run mine at -125mV and default freqs.

  • aleixoto
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    August 09, 2016, 10:54:05 AM
     #4599
    Quote from: elzium on August 09, 2016, 10:30:17 AM
    I agree on that, added power cost is not worth added hashrate on 280x. Go for lowest stable voltage and be cool. I run mine at -125mV and default freqs.

    nice thanks! how i cant set -125mV voltaje??


    im using -powlim 20 on script but i dont know how set volatjes on mV

    thanks

  • aleixoto
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    August 09, 2016, 11:02:11 AM
     #4600
    Quote from: allcoinminer on August 09, 2016, 09:29:37 AM
    Set core clock speed to 1175 and memory clock speed to 1500.
    You should get around 20Mhs. Also try setting -etho to 0.
    Lower core clock speed if it crashes.
    I did another tweak and I'm getting around 26Mhs. But need to check how stable it is.

    -etho dont exist...

    you say -etha 0???

    im try with all freq and never get 20mhs... i set all variables and virtual memory to 16gb

    1x r9 280x sapphire eth/sia
    15.12 driver
    win7 x64
    miner v.5.3
          
    i set 1175/1500 powlim 20 -dcri 70 = 16,9mhs/593mhs

                                            -dcri 60 = 17,1mhs/513mhs

                                            -dcri 50 = 16,8mhs/420mhs

                                            -dcri 40 =16,5mhs/331mhs

    *if i set low dcri hashrate low on dual miner..
                              
    Pages: « 1 ... 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 [230] 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 ... 1410 »
      Print  
Page 229
Viewing Page: 230

IRLBTC™ © 2025 IRLBTC.com