<<  >> (p.301)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591476 times)

    • xeridea
    Sr. Member
    ****
    Offline Offline

    Activity: 449
    Merit: 251


    View Profile WWW
    September 23, 2016, 01:51:18 PM
     #6001
    Quote from: Lion BItcoin Shop on September 23, 2016, 01:01:42 PM
    MY rx 480 stable at 29.5mhs at eth only but in duall mining is very poor i get only 25mhs eth + 250mhs sia
    im use Rx 470 4gb + Rx 480 8gb , anyway to make the dualmining only in Rx 470? and my rx 480 running eth only ?
    how to setting it ?
    Run 2 instances of miner.  You need to change monitor port on one to prevent error messages about it.  You could also set different -dcri for each card, making the 480 dcri really low.
    Profitability over time charts for many GPUs - http://xeridea.us/charts

    BTC:  bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC:  LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth:  0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24

  • tutorialevideo
    Legendary
    *
    Offline Offline

    Activity: 1161
    Merit: 1001

    Don`t invest more than you can afford to lose


    View Profile WWW
    September 23, 2016, 01:55:52 PM
     #6002
    anyoane can help me if claymore is working on getwork pool?
    Hosting Bitcoin and any mining gear in Europe/Romania.

    https://bt.irlbtc.com/view/5228685.msg53918147#msg53918147

    For more info you can write me!

  • amfofo
    Newbie
    *
    Offline Offline

    Activity: 46
    Merit: 0


    View Profile
    September 23, 2016, 02:02:15 PM
    Last edit: September 23, 2016, 03:24:28 PM by amfofo
     #6003
    can someone pls teach me how to configure my setup.

    i have 3 gpu in 1 rig. one of it causes bsod while dual mining.
    what i want to do is run the 2 gpu on dual mining while the 3rd gpu only mines eth

    what should i do? pls help

    NVM found the solution: -mode 1-2

  • ioglnx
    Sr. Member
    ****
    Offline Offline

    Activity: 574
    Merit: 250

    Fighting mob law and inquisition in this forum


    View Profile
    September 23, 2016, 02:42:25 PM
     #6004
    How to use the Cryptonote miner?
    GTX 1080Ti rocks da house... seriously... this card is a beast³
    Owning by now 18x GTX1080Ti :-D @serious love of efficiency

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    September 23, 2016, 04:48:55 PM
     #6005
    Quote from: wll1rah on September 23, 2016, 10:35:20 AM
    @claymore,
    May you be implementing cryptonote as a dual mining option in the future?  I am aware of the draw backs of two memory intensive coins on the same card.

    ETH+XMR will not work properly.

    Quote from: bensam1231 on September 23, 2016, 10:51:21 AM
    How do you disable the logfile?

    "-dbg -1"
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • wll1rah
    Full Member
    ***
    Offline Offline

    Activity: 209
    Merit: 100


    View Profile
    September 23, 2016, 05:12:05 PM
     #6006
    Quote from: Lion BItcoin Shop on September 23, 2016, 01:01:42 PM
    MY rx 480 stable at 29.5mhs at eth only but in duall mining is very poor i get only 25mhs eth + 250mhs sia
    im use Rx 470 4gb + Rx 480 8gb , anyway to make the dualmining only in Rx 470? and my rx 480 running eth only ?
    how to setting it ?
    [/quote
    -mode 1-deviceID#

  • dexxa05
    Member
    **
    Offline Offline

    Activity: 87
    Merit: 10


    View Profile
    September 23, 2016, 05:42:56 PM
     #6007
    Hi Guys,

    I have an issue, the fancontrol is only working with 1 of my 5 GPU, do you know why ?

    Thx in advance

  • Prelude
    Legendary
    *
    Offline Offline

    Activity: 1596
    Merit: 1000



    View Profile
    September 23, 2016, 05:54:39 PM
     #6008
    Quote from: adaseb on September 23, 2016, 10:14:02 AM
    Quote from: Prelude on September 23, 2016, 01:20:54 AM
    Quote from: Claymore on September 22, 2016, 08:18:26 PM
    Quote from: peoples on September 22, 2016, 06:53:30 PM
    still no fancontrol with rx cards under linux ?
    Please all linux users with rx cards waiting for this .. sure more important than colors in linux Wink

    Be patient please. Now I'm working on updating Monero miner as promised (check its thread for details), it will take a couple of days. Then I will work on this task, as promised.

    Hi Claymore,

    When you have time do you think it's possible to implement this?

    Quote from: Prelude on September 22, 2016, 02:23:26 PM
    Hi Claymore,

    I have an issue with DAG generation with some Hawaii cards that are extremely undervolted. The cards will mine perfectly without ever crashing, but at that low voltage they can't generate the initial DAG or the following DAG when it comes time to switch. They'll just crash while other cards in the system keep mining.

    This can be solved by raising the voltage, obviously, but that means an extra 30-40w of power consumed on most of these cards which I'd like to avoid. Seems to me that there would possibly be two ways to fix this, while keeping the undervolts where they are.

    1) Reduce the intensity of DAG generation? (Not sure this is possible...)

    2) Add an option to the config file to lower GPU's core clock while generating the DAG? IE When mining use regular stable mining clock speed of 1100MHz, next DAG generation comes along drop to 900MHz while generating, when completed increase back to 1100MHz. Flags would be -cclock 1100 and -cclockdag 900.

    Any thoughts? Hope this makes sense!

    Thanks!

    What voltage are you running your 290s at 1100?

    1100 was just an example. I actually run Hawaii cards at 1055 with voltage as low as they'll go, generally 1.03-1.06v. (actual)

  • adaseb
    Legendary
    *
    Offline Offline

    Activity: 4046
    Merit: 1762



    View Profile
    September 23, 2016, 06:01:28 PM
     #6009
    Quote from: Prelude on September 23, 2016, 05:54:39 PM
    Quote from: adaseb on September 23, 2016, 10:14:02 AM
    Quote from: Prelude on September 23, 2016, 01:20:54 AM
    Quote from: Claymore on September 22, 2016, 08:18:26 PM
    Quote from: peoples on September 22, 2016, 06:53:30 PM
    still no fancontrol with rx cards under linux ?
    Please all linux users with rx cards waiting for this .. sure more important than colors in linux Wink

    Be patient please. Now I'm working on updating Monero miner as promised (check its thread for details), it will take a couple of days. Then I will work on this task, as promised.

    Hi Claymore,

    When you have time do you think it's possible to implement this?

    Quote from: Prelude on September 22, 2016, 02:23:26 PM
    Hi Claymore,

    I have an issue with DAG generation with some Hawaii cards that are extremely undervolted. The cards will mine perfectly without ever crashing, but at that low voltage they can't generate the initial DAG or the following DAG when it comes time to switch. They'll just crash while other cards in the system keep mining.

    This can be solved by raising the voltage, obviously, but that means an extra 30-40w of power consumed on most of these cards which I'd like to avoid. Seems to me that there would possibly be two ways to fix this, while keeping the undervolts where they are.

    1) Reduce the intensity of DAG generation? (Not sure this is possible...)

    2) Add an option to the config file to lower GPU's core clock while generating the DAG? IE When mining use regular stable mining clock speed of 1100MHz, next DAG generation comes along drop to 900MHz while generating, when completed increase back to 1100MHz. Flags would be -cclock 1100 and -cclockdag 900.

    Any thoughts? Hope this makes sense!

    Thanks!

    What voltage are you running your 290s at 1100?

    1100 was just an example. I actually run Hawaii cards at 1055 with voltage as low as they'll go, generally 1.03-1.06v. (actual)

    Do you dual mine or ETH solo? Because I think I ran mine at 0.95V once but it was slow (25MHs) solo only.
     
     RAZED      		| 
     100% 
    WELCOME
    BONUS
    		│
    █████████████████████
    █████████████████████████
    ████████████▀░░░░▀███████
    ██████████▀░░▄▀▀▄░░▀█████
    ██████████▄▄██▄▄██▄░▀████
    █████▀░░░░░░░▀██░░█░░████
    ████░░████▀▀█░░██▀░░▄████
    ████░░████▄▄█░░█░░▄██████
    ████░░█▀▀████░░██████████
    ████░░█▄▄███▀░░██████████
    █████▄░░░░░░░▄███████████
    █████████████████████████
    █████████████████████
    █████████████████████
    █████████████████████████
    ██████████▀▀░░░░░▀▀██████
    ████████▀░░▄▄█░░▀▄░░█████
    ██████▀░░▄█████▄░░▀░░████
    █████░░▄████▄▀░░█▄▄░░████
    ████░░▄███▄▀░░▄▀██▀░░████
    ████░░▀▀██░░▄▀███▀░░█████
    ████░░▄░░▀█████▀░░▄██████
    █████░░▀▄░░█▀▀░░▄████████
    ██████▄▄░░░░░▄▄██████████
    █████████████████████████
    █████████████████████
    		| 
     NO 
    KYC
    		| 
      RAZE THE LIMITS   ► PLAY NOW     

  • adamvp
    Hero Member
    *****
    Offline Offline

    Activity: 1246
    Merit: 708



    View Profile
    September 23, 2016, 06:04:42 PM
     #6010
    Quote from: adaseb on September 23, 2016, 06:01:28 PM
    Quote from: Prelude on September 23, 2016, 05:54:39 PM
    Quote from: adaseb on September 23, 2016, 10:14:02 AM
    Quote from: Prelude on September 23, 2016, 01:20:54 AM
    Quote from: Claymore on September 22, 2016, 08:18:26 PM
    Quote from: peoples on September 22, 2016, 06:53:30 PM
    still no fancontrol with rx cards under linux ?
    Please all linux users with rx cards waiting for this .. sure more important than colors in linux Wink

    Be patient please. Now I'm working on updating Monero miner as promised (check its thread for details), it will take a couple of days. Then I will work on this task, as promised.

    Hi Claymore,

    When you have time do you think it's possible to implement this?

    Quote from: Prelude on September 22, 2016, 02:23:26 PM
    Hi Claymore,

    I have an issue with DAG generation with some Hawaii cards that are extremely undervolted. The cards will mine perfectly without ever crashing, but at that low voltage they can't generate the initial DAG or the following DAG when it comes time to switch. They'll just crash while other cards in the system keep mining.

    This can be solved by raising the voltage, obviously, but that means an extra 30-40w of power consumed on most of these cards which I'd like to avoid. Seems to me that there would possibly be two ways to fix this, while keeping the undervolts where they are.

    1) Reduce the intensity of DAG generation? (Not sure this is possible...)

    2) Add an option to the config file to lower GPU's core clock while generating the DAG? IE When mining use regular stable mining clock speed of 1100MHz, next DAG generation comes along drop to 900MHz while generating, when completed increase back to 1100MHz. Flags would be -cclock 1100 and -cclockdag 900.

    Any thoughts? Hope this makes sense!

    Thanks!

    What voltage are you running your 290s at 1100?

    1100 was just an example. I actually run Hawaii cards at 1055 with voltage as low as they'll go, generally 1.03-1.06v. (actual)

    Do you dual mine or ETH solo? Because I think I ran mine at 0.95V once but it was slow (25MHs) solo only.


    What is your power consumption?
    I am looking for signature campaign Wink pm me

  • adaseb
    Legendary
    *
    Offline Offline

    Activity: 4046
    Merit: 1762



    View Profile
    September 23, 2016, 06:36:56 PM
     #6011
    Quote from: adamvp on September 23, 2016, 06:04:42 PM
    Quote from: adaseb on September 23, 2016, 06:01:28 PM
    Quote from: Prelude on September 23, 2016, 05:54:39 PM
    Quote from: adaseb on September 23, 2016, 10:14:02 AM
    Quote from: Prelude on September 23, 2016, 01:20:54 AM
    Quote from: Claymore on September 22, 2016, 08:18:26 PM
    Quote from: peoples on September 22, 2016, 06:53:30 PM
    still no fancontrol with rx cards under linux ?
    Please all linux users with rx cards waiting for this .. sure more important than colors in linux Wink

    Be patient please. Now I'm working on updating Monero miner as promised (check its thread for details), it will take a couple of days. Then I will work on this task, as promised.

    Hi Claymore,

    When you have time do you think it's possible to implement this?

    Quote from: Prelude on September 22, 2016, 02:23:26 PM
    Hi Claymore,

    I have an issue with DAG generation with some Hawaii cards that are extremely undervolted. The cards will mine perfectly without ever crashing, but at that low voltage they can't generate the initial DAG or the following DAG when it comes time to switch. They'll just crash while other cards in the system keep mining.

    This can be solved by raising the voltage, obviously, but that means an extra 30-40w of power consumed on most of these cards which I'd like to avoid. Seems to me that there would possibly be two ways to fix this, while keeping the undervolts where they are.

    1) Reduce the intensity of DAG generation? (Not sure this is possible...)

    2) Add an option to the config file to lower GPU's core clock while generating the DAG? IE When mining use regular stable mining clock speed of 1100MHz, next DAG generation comes along drop to 900MHz while generating, when completed increase back to 1100MHz. Flags would be -cclock 1100 and -cclockdag 900.

    Any thoughts? Hope this makes sense!

    Thanks!

    What voltage are you running your 290s at 1100?

    1100 was just an example. I actually run Hawaii cards at 1055 with voltage as low as they'll go, generally 1.03-1.06v. (actual)

    Do you dual mine or ETH solo? Because I think I ran mine at 0.95V once but it was slow (25MHs) solo only.


    What is your power consumption?

    at 25 mhs? I dont remember, it was less than 200 watts I think like 175watts each.

    It was too slow and couldn't dual mine so I had to raise the voltage.
     
     RAZED      		| 
     100% 
    WELCOME
    BONUS
    		│
    █████████████████████
    █████████████████████████
    ████████████▀░░░░▀███████
    ██████████▀░░▄▀▀▄░░▀█████
    ██████████▄▄██▄▄██▄░▀████
    █████▀░░░░░░░▀██░░█░░████
    ████░░████▀▀█░░██▀░░▄████
    ████░░████▄▄█░░█░░▄██████
    ████░░█▀▀████░░██████████
    ████░░█▄▄███▀░░██████████
    █████▄░░░░░░░▄███████████
    █████████████████████████
    █████████████████████
    █████████████████████
    █████████████████████████
    ██████████▀▀░░░░░▀▀██████
    ████████▀░░▄▄█░░▀▄░░█████
    ██████▀░░▄█████▄░░▀░░████
    █████░░▄████▄▀░░█▄▄░░████
    ████░░▄███▄▀░░▄▀██▀░░████
    ████░░▀▀██░░▄▀███▀░░█████
    ████░░▄░░▀█████▀░░▄██████
    █████░░▀▄░░█▀▀░░▄████████
    ██████▄▄░░░░░▄▄██████████
    █████████████████████████
    █████████████████████
    		| 
     NO 
    KYC
    		| 
      RAZE THE LIMITS   ► PLAY NOW     

  • 36524s
    Newbie
    *
    Offline Offline

    Activity: 37
    Merit: 0


    View Profile
    September 23, 2016, 07:56:51 PM
     #6012
    Hi, I've just started to try and mine etc solo and when I look at my claymore console it looks like this:

    ETH: 09/23/16-20:53:35 - New job from localhost:8545
    ETH - Total Speed: 79.348 Mh/s, Total Shares: 0, Rejected: 0, Time: 10:49
    ETH: GPU0 30.393 Mh/s, GPU1 24.122 Mh/s, GPU2 20.403 Mh/s
    GPU0 t=67C fan=50%, GPU1 t=64C fan=45%, GPU2 t=63C fan=54%
    ETH: 09/23/16-20:53:48 - New job from localhost:8545
    ETH - Total Speed: 79.684 Mh/s, Total Shares: 0, Rejected: 0, Time: 10:49
    ETH: GPU0 30.502 Mh/s, GPU1 24.350 Mh/s, GPU2 24.832 Mh/s
    ETH: 09/23/16-20:53:58 - New job from localhost:8545
    ETH - Total Speed: 72.359 Mh/s, Total Shares: 0, Rejected: 0, Time: 10:49
    ETH: GPU0 25.210 Mh/s, GPU1 22.480 Mh/s, GPU2 24.668 Mh/s
    ETH: 09/23/16-20:54:10 - New job from localhost:8545
    ETH - Total Speed: 78.965 Mh/s, Total Shares: 0, Rejected: 0, Time: 10:49
    ETH: GPU0 30.518 Mh/s, GPU1 23.941 Mh/s, GPU2 24.506 Mh/s
    GPU0 t=68C fan=50%, GPU1 t=64C fan=45%, GPU2 t=63C fan=53%
    ETH: 09/23/16-20:54:13 - New job from localhost:8545
    ETH - Total Speed: 78.263 Mh/s, Total Shares: 0, Rejected: 0, Time: 10:49
    ETH: GPU0 30.453 Mh/s, GPU1 24.227 Mh/s, GPU2 23.583 Mh/s


    This has been running all day - a getBalance gives me 0.

    The geth rpc window says:
    I0923 20:54:46.934722 miner/worker.go:573] commit new work on block 2310577 with 0 txs & 0 uncles. Took 44.5425ms
    I0923 20:54:51.393574 core/blockchain.go:962] imported 1 block(s) (0 queued 0 ignored) including 0 txs in 6.5066ms. #2310577 [6acf7fda 6acf7fda]
    I0923 20:54:51.449627 miner/worker.go:573] commit new work on block 2310578 with 1 txs & 0 uncles. Took 36.5348ms
    I0923 20:55:08.114122 core/blockchain.go:962] imported 1 block(s) (0 queued 0 ignored) including 1 txs in 9.5091ms. #2310578 [f1a51caa f1a51caa]
    I0923 20:55:08.193765 miner/worker.go:573] commit new work on block 2310579 with 2 txs & 0 uncles. Took 76.64ms
    I0923 20:55:10.659833 core/blockchain.go:962] imported 1 block(s) (0 queued 0 ignored) including 1 txs in 12.0138ms. #2310578 [9866bf57 9866bf57]
    I0923 20:55:10.772940 miner/worker.go:573] commit new work on block 2310579 with 3 txs & 1 uncles. Took 58.056ms
    I0923 20:55:11.636668 core/blockchain.go:962] imported 1 block(s) (0 queued 0 ignored) including 0 txs in 9.0086ms. #2310579 [c21f1d16 c21f1d16]
    I0923 20:55:12.012029 miner/worker.go:573] commit new work on block 2310580 with 3 txs & 1 uncles. Took 312.8004ms
    I0923 20:55:22.231112 core/blockchain.go:962] imported 1 block(s) (0 queued 0 ignored) including 3 txs in 31.5318ms. #2310580 [bb5b60af bb5b60af]
    I0923 20:55:22.294171 miner/worker.go:573] commit new work on block 2310581 with 1 txs & 0 uncles. Took 46.0438ms
    I0923 20:55:22.863029 core/blockchain.go:962] imported 1 block(s) (0 queued 0 ignored) including 2 txs in 14.5146ms. #2310579 [d3269058 d3269058]


    I don't know if it's working or not and frankly I'm a huge noob that's always mined via a pool.

  • fittsy
    Sr. Member
    ****
    Offline Offline

    Activity: 441
    Merit: 252



    View Profile WWW
    September 23, 2016, 08:12:16 PM
     #6013
    Quote from: 36524s on September 23, 2016, 07:56:51 PM
    Hi, I've just started to try and mine etc solo and when I look at my claymore console it looks like this:

    (redacted)

    I don't know if it's working or not and frankly I'm a huge noob that's always mined via a pool.



    You haven't found any blocks yet.

    Mining solo with 80 MH you should do something like 10 or 12 days before finding a block.

    ETH hashrate has been up at near record highs... and the difficulty has increased.  I recommend that you go back to mining in a pool.
    MinerParts - 8 GPU Riserless motherboard with Intel 3855 CPU - 1600w fully modular power supply
    Best quality PCIe Powered Risers Shop on Amazon - Shop on eBay - or ship direct at MinerParts.com <- best for international or crypto purchases

  • Za1n
    Legendary
    *
    Offline Offline

    Activity: 1078
    Merit: 1011



    View Profile
    September 23, 2016, 09:25:22 PM
     #6014
    Quote from: fittsy on September 23, 2016, 08:12:16 PM
    Quote from: 36524s on September 23, 2016, 07:56:51 PM
    Hi, I've just started to try and mine etc solo and when I look at my claymore console it looks like this:

    (redacted)

    I don't know if it's working or not and frankly I'm a huge noob that's always mined via a pool.



    You haven't found any blocks yet.

    Mining solo with 80 MH you should do something like 10 or 12 days before finding a block.

    ETH hashrate has been up at near record highs... and the difficulty has increased.  I recommend that you go back to mining in a pool.

    Yes, I agree pool mining with that low of a hashrate is better with coins like ETH or ETC.

    36524s you could mine coins such as Shift or Expanse if you want to try your hand at mining something solo. While on paper they might not be as profitable, in practice since you will have a decent shot at mining a block you will probably come out ahead. If profit is you main motive, then again pool mining would be your best bet.

  • megacrypto
    Sr. Member
    ****
    Offline Offline

    Activity: 291
    Merit: 250



    View Profile
    September 23, 2016, 10:48:11 PM
     #6015
    its working but im getting the following:

    Code:
    00:41:46:874 fdc1e780 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
    00:41:46:874 fdc1e780 º        Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.1         º
    00:41:46:874 fdc1e780 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    00:41:46:874 fdc1e780
    00:41:47:075 fdc1e780 ETH: 4 pools are specified
    00:41:47:075 fdc1e780 Main Ethereum pool is us1.ethpool.org:3333
    00:41:47:079 fdc1e780 OpenCL platform: AMD Accelerated Parallel Processing
    00:41:47:079 fdc1e780 OpenCL initializing...

    00:41:47:079 fdc1e780 AMD Cards available: 2
    00:41:47:079 fdc1e780 GPU #0: Cedar, 2048 MB available, 2 compute units
    00:41:47:079 fdc1e780 POOL/SOLO version
    00:41:47:079 fdc1e780 b225
    00:41:47:079 fdc1e780 Platform: Linux
    00:41:47:094 fdc1e780 start building OpenCL program...
    00:42:05:421 fdc1e780 done
    00:42:05:421 fdc1e780 GPU #0: set -etha as 0 (ETH algo for fast cards)
    00:42:05:422 fdc1e780 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
    00:42:05:422 fdc1e780 No NVIDIA CUDA GPUs detected.
    00:42:05:422 fdc1e780 Total cards: 1
    00:42:05:430 fdc1e780 No NVIDIA cards in the list, NVML library will not be used.
    00:42:05:527 ee217700 ETH: Stratum - connecting to 'us1.ethpool.org' <108.61.158.150> port 3333
    00:42:05:531 fdc1e780 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

    00:42:05:531 fdc1e780 ETH: qtminer stratum mode
    00:42:05:531 fdc1e780 Watchdog enabled
    00:42:05:531 fdc1e780 Remote management is enabled on port 3333
    00:42:05:531 fdc1e780

    00:42:05:680 ee217700 send: {"id":2,"jsonrpc":"2.0","method":"eth_login","params":["0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7","x"]}

    00:42:05:680 ee217700 ETH: Stratum - Connected (us1.ethpool.org:3333)
    00:42:05:834 ee217700 got 39 bytes
    00:42:05:834 ee217700 buf: {"id":2,"jsonrpc":"2.0","result":true}

    00:42:05:834 ee217700 parse packet: 38
    00:42:05:834 ee217700 ETH: Authorized
    00:42:05:834 ee217700 send: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

    00:42:05:835 ee217700 new buf size: 0
    00:42:05:988 ee217700 got 248 bytes
    00:42:05:989 ee217700 buf: {"id":3,"jsonrpc":"2.0","result":["0xe8d109ef9559681b63f752f36b63637673245a0e5363f9dc34f9d534699465c6","0xb636872376ad54507f91f53e9c90b287e2025008319a884b8f37c3d1deb996a6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2351e7"]}

    00:42:05:989 ee217700 parse packet: 247
    00:42:05:989 ee217700 eth: job changed
    00:42:05:989 ee217700 new buf size: 0
    00:42:06:040 ef219700 Setting DAG epoch #77...
    00:42:06:598 ee217700 got 248 bytes
    00:42:06:598 ee217700 buf: {"id":0,"jsonrpc":"2.0","result":["0x6c2c020d162943a1cab3abee148b2394a810163e0ffdfa6af3fb7b9b0041d5c3","0xb636872376ad54507f91f53e9c90b287e2025008319a884b8f37c3d1deb996a6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2351e8"]}

    00:42:06:599 ee217700 parse packet: 247
    00:42:06:599 ee217700 eth: job changed
    00:42:06:599 ee217700 new buf size: 0
    00:42:06:599 ee217700 ETH: 09/24/16-00:42:06 - New job from us1.ethpool.org:3333
    00:42:06:599 ee217700 target: 0x0000000112e0be82 (diff: 4000MH), epoch #77
    00:42:06:599 ee217700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    00:42:06:599 ee217700 ETH: GPU0 0.000 Mh/s
    00:42:08:065 ef219700 Setting DAG epoch #77 for GPU #0
    00:42:08:065 ef219700 Create GPU buffer for GPU #0
    00:42:08:533 fdc1e780 Cannot get Overdrive capabilities for adapter 0
    00:42:09:207 ee217700 got 248 bytes
    00:42:09:207 ee217700 buf: {"id":0,"jsonrpc":"2.0","result":["0x34d154e670b456dec97b0b43e6a7f471761e39e99c1a026332653c0c3e4c6c99","0xb636872376ad54507f91f53e9c90b287e2025008319a884b8f37c3d1deb996a6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2351e9"]}

    00:42:09:207 ee217700 parse packet: 247
    00:42:09:207 ee217700 eth: job changed
    00:42:09:207 ee217700 new buf size: 0
    00:42:09:207 ee217700 ETH: 09/24/16-00:42:09 - New job from us1.ethpool.org:3333
    00:42:09:207 ee217700 target: 0x0000000112e0be82 (diff: 4000MH), epoch #77
    00:42:09:207 ee217700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    00:42:09:208 ee217700 ETH: GPU0 0.000 Mh/s
    00:42:11:537 fdc1e780 Cannot get Overdrive capabilities for adapter 0
    00:42:13:253 ee217700 got 248 bytes
    00:42:13:254 ee217700 buf: {"id":0,"jsonrpc":"2.0","result":["0x1f72cf68f737a37b047a02a691c80ff80c185d9f3a87c15b58acb70449d4f889","0xb636872376ad54507f91f53e9c90b287e2025008319a884b8f37c3d1deb996a6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2351ea"]}

    00:42:13:254 ee217700 parse packet: 247
    00:42:13:254 ee217700 eth: job changed
    00:42:13:254 ee217700 new buf size: 0
    00:42:13:254 ee217700 ETH: 09/24/16-00:42:13 - New job from us1.ethpool.org:3333
    00:42:13:254 ee217700 target: 0x0000000112e0be82 (diff: 4000MH), epoch #77
    00:42:13:254 ee217700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    00:42:13:254 ee217700 ETH: GPU0 0.000 Mh/s
    00:42:14:540 fdc1e780 Cannot get Overdrive capabilities for adapter 0
    00:42:15:471 ee217700 got 248 bytes
    00:42:15:472 ee217700 buf: {"id":0,"jsonrpc":"2.0","result":["0xb42e73a0cb0dbb6b5b73eaa41a9122d29adf2799ef0ea1de66dcbed9e433323b","0xb636872376ad54507f91f53e9c90b287e2025008319a884b8f37c3d1deb996a6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2351eb"]}
    
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
◈ ZEROSTATE ◈EMOTIONAL INTELLIGENCE                                   ● INSTAGRAM ● FACEBOOK● TWITTER

    POWERED BY BLOCKCHAIN                                         ● MEDIUM ● ANN THREAD
    
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀


  • qqqq
    Legendary
    *
    Offline Offline

    Activity: 1596
    Merit: 1011


    View Profile
    September 23, 2016, 11:48:58 PM
     #6016
    Quote
    03:44:36:880   d24   OpenCL platform: AMD Accelerated Parallel Processing
    03:44:36:880   d24   OpenCL initializing...

    03:44:36:885   d24   AMD Cards available: 2
    03:44:36:885   d24   GPU #0: Ellesmere, 4096 MB available, 64 compute units
    03:44:36:885   d24   GPU #1: Ellesmere, 4096 MB available, 36 compute units
    03:44:36:885   d24   GPU #1 recognized as Radeon RX 480

    First GPU actually is Fiji the second Ellesmere. ver 7.1

  • Lion BItcoin Shop
    Hero Member
    *****
    Offline Offline

    Activity: 588
    Merit: 500

    BitcoreService.com


    View Profile
    September 24, 2016, 02:17:58 AM
     #6017
    Quote from: wll1rah on September 23, 2016, 05:12:05 PM

    MY rx 480 stable at 29.5mhs at eth only but in duall mining is very poor i get only 25mhs eth + 250mhs sia
    im use Rx 470 4gb + Rx 480 8gb , anyway to make the dualmining only in Rx 470? and my rx 480 running eth only ?
    how to setting it ?
    [/quote
    -mode 1-deviceID#

    Quote from: BTCBusinessConsult on September 23, 2016, 01:25:56 PM

    You can put in the command line to only run Ethereum.

    Read the first page on how to set it up but I think its like " -mode 1"

    Edit: Yes, -mode 1 in the setup will have it run Ethereum Only.

    Quote from: xeridea on September 23, 2016, 01:51:18 PM

    Run 2 instances of miner.  You need to change monitor port on one to prevent error messages about it.  You could also set different -dcri for each card, making the 480 dcri really low.

    trying use this setting but still didn't work :
    -mode 01
    -mode 0.1
    -mode -0-1

    how to set it?
    i want to the "0" vga running dual mining and the "1" running eth only

  • adamvp
    Hero Member
    *****
    Offline Offline

    Activity: 1246
    Merit: 708



    View Profile
    September 24, 2016, 03:17:05 AM
     #6018
    Quote from: Lion BItcoin Shop on September 24, 2016, 02:17:58 AM
    Quote from: wll1rah on September 23, 2016, 05:12:05 PM

    MY rx 480 stable at 29.5mhs at eth only but in duall mining is very poor i get only 25mhs eth + 250mhs sia
    im use Rx 470 4gb + Rx 480 8gb , anyway to make the dualmining only in Rx 470? and my rx 480 running eth only ?
    how to setting it ?
    [/quote
    -mode 1-deviceID#

    Quote from: BTCBusinessConsult on September 23, 2016, 01:25:56 PM

    You can put in the command line to only run Ethereum.

    Read the first page on how to set it up but I think its like " -mode 1"

    Edit: Yes, -mode 1 in the setup will have it run Ethereum Only.

    Quote from: xeridea on September 23, 2016, 01:51:18 PM

    Run 2 instances of miner.  You need to change monitor port on one to prevent error messages about it.  You could also set different -dcri for each card, making the 480 dcri really low.

    trying use this setting but still didn't work :
    -mode 01
    -mode 0.1
    -mode -0-1

    how to set it?
    i want to the "0" vga running dual mining and the "1" running eth only
    Mode 0-1
    I am looking for signature campaign Wink pm me

  • alekst
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    September 24, 2016, 03:36:48 AM
     #6019
    Hi all! Sorry for my english!
    I am new eth-miner user. I have installed Ubuntu server 15.10 on usb flash card. My system have 4 Gb ram and my videocards have video memore 4 Gb is too. I use ext2 file system. Could  I not use swap for etherium mining?

  • Server2850Guy
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 0


    View Profile
    September 24, 2016, 04:47:05 AM
     #6020
    @claymore
    first, let me thank you for your nice work.
    Do you have a miner, that fully support nvidia and AMD, for Linux, that works with Monero xmr ?

    thanks for info in advance !

    Steve
    Pages: « 1 ... 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 [301] 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 ... 1409 »
      Print  
Page 300
Viewing Page: 301

IRLBTC™ © 2025 IRLBTC.com