<<  >> (p.543)
    Author Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)  (Read 3839403 times)

    • jenci
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    January 16, 2017, 05:25:54 PM
     #10841
    Quote from: invoke on January 16, 2017, 05:11:03 PM
    Is anyone experiencing complete system halt (windows 10) due to the watchdog??

    I have been having troubles with the miner since v9.3. I have a system of 5 RX480 8GB cards and every time I run the miner, after about 5-10 min, the terminal shows "Thread hanging, about to restart" but instead, the whole system freezes.

    Any suggestions on how to solve this issue??

    I have:
    - Updated/Downgraded drivers, currently v16.11.3 as suggested at initialization.
    - Enabled/Disabled options: asm, intensity, algorithm, watchdog.


    all stock?if no, try reset overclock. i have same problem when overdecrease core voltage

  • KL0nLutiy
    Member
    **
    Offline Offline

    Activity: 158
    Merit: 10


    View Profile
    January 16, 2017, 05:40:20 PM
     #10842
    Will new miner available today?

  • zzzzzzzzzz
    Full Member
    ***
    Offline Offline

    Activity: 150
    Merit: 100


    View Profile
    January 16, 2017, 05:47:14 PM
     #10843
    Quote from: KL0nLutiy on January 16, 2017, 05:40:20 PM
    Will new miner available today?

    Maybe.

  • invoke
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    January 16, 2017, 06:54:04 PM
     #10844
    Quote from: jenci on January 16, 2017, 05:25:54 PM
    Quote from: invoke on January 16, 2017, 05:11:03 PM
    Is anyone experiencing complete system halt (windows 10) due to the watchdog??

    I have been having troubles with the miner since v9.3. I have a system of 5 RX480 8GB cards and every time I run the miner, after about 5-10 min, the terminal shows "Thread hanging, about to restart" but instead, the whole system freezes.

    Any suggestions on how to solve this issue??

    I have:
    - Updated/Downgraded drivers, currently v16.11.3 as suggested at initialization.
    - Enabled/Disabled options: asm, intensity, algorithm, watchdog.


    all stock?if no, try reset overclock. i have same problem when overdecrease core voltage

    yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

    Code:
    GPU0 t=89C fan=41%, GPU1 t=88C fan=42%, GPU2 t=74C fan=44%, GPU3 t=73C fan=35%, GPU4 t=73C fan=38%
    ZEC: 01/16/17-13:45:43 - SHARE FOUND - (GPU 4)
    ZEC: Share accepted (297 ms)!
    ZEC: 01/16/17-13:45:46 - SHARE FOUND - (GPU 1)
    ZEC: Share accepted (297 ms)!
    ZEC: 01/16/17-13:45:58 - SHARE FOUND - (GPU 4)
    GPU0 t=89C fan=42%, GPU1 t=89C fan=41%, GPU2 t=74C fan=44%, GPU3 t=73C fan=35%, GPU4 t=73C fan=39%

    Miner thread hangs, need to restart miner!
    GPU #0: Ellesmere, 8192 MB available, 36 compute units
    GPU #1: Ellesmere, 8192 MB available, 36 compute units
    GPU #2: Ellesmere, 8192 MB available, 36 compute units
    GPU #3: Ellesmere, 8192 MB available, 36 compute units
    GPU #4: Ellesmere, 8192 MB available, 36 compute units
    ZEC - Total Speed: 419.651 H/s, Total Shares: 59, Rejected: 0, Time: 00:08
    ZEC: GPU0 0.000 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s, GPU3 212.510 H/s, GPU4 207.141 H/s
    Pool switches: ZEC - 0
    Current ZEC pool share target: 0x000ffffe (diff: 4096H)
    ZEC: 01/16/17-13:50:21 - New job from zec-us1.dwarfpool.com:3335
    ZEC - Total Speed: 419.651 H/s, Total Shares: 59, Rejected: 0, Time: 00:08
    ZEC: GPU0 0.000 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s, GPU3 212.510 H/s, GPU4 207.141 H/s
    GPU0 t=51C fan=18%, GPU1 t=56C fan=18%, GPU2 t=56C fan=0%, GPU3 t=58C fan=0%, GPU4 t=60C fan=28%

    Restarting OK, exit...



    ╔════════════════════════════════════════════════════════════════╗
    ║            Claymore's ZCash AMD GPU Miner v9.1 Beta            ║
    ╚════════════════════════════════════════════════════════════════╝

  • jenci
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    January 16, 2017, 06:59:01 PM
     #10845
    Quote from: invoke on January 16, 2017, 06:54:04 PM

    yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

    try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

  • kev7112001
    Sr. Member
    ****
    Offline Offline

    Activity: 479
    Merit: 250


    View Profile
    January 16, 2017, 07:07:06 PM
     #10846
    Quote from: jenci on January 16, 2017, 06:59:01 PM
    Quote from: invoke on January 16, 2017, 06:54:04 PM

    yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

    try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

    -i 4?
    u should never need that low -i 7 should be low enough 4 that if it isnt stable then its your card clocks or not enough voltage
    MCXNOW MODERATOR

  • kev7112001
    Sr. Member
    ****
    Offline Offline

    Activity: 479
    Merit: 250


    View Profile
    January 16, 2017, 07:10:40 PM
     #10847
    see using asm is using bare metal on the gpu so what ever clocks u used in the ones before wont be stable i had a 7970 at 1230 clocks on v10 doing 265sols i had to reduce that by 70 mhz to be stable on v11 doing 290sols
    MCXNOW MODERATOR

  • invoke
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    January 16, 2017, 07:20:52 PM
     #10848
    Quote from: jenci on January 16, 2017, 06:59:01 PM
    Quote from: invoke on January 16, 2017, 06:54:04 PM

    yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

    try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

    I will retry that, but in the configuration, I had -i 2 and still having a halt.

  • kev7112001
    Sr. Member
    ****
    Offline Offline

    Activity: 479
    Merit: 250


    View Profile
    January 16, 2017, 07:29:11 PM
     #10849
    Quote from: invoke on January 16, 2017, 07:20:52 PM
    Quote from: jenci on January 16, 2017, 06:59:01 PM
    Quote from: invoke on January 16, 2017, 06:54:04 PM

    yeah, everything is at stock clocks, I have not over-clocked any card or CPU. Also, I rechecked, it started at v9.2, in v9.1 it does not kill the system:

    try set minimum intensity. on my test rig with v9.2 -i 7 work stable, but v9.3, v10, v11 work stable only with -i 4

    I will retry that, but in the configuration, I had -i 2 and still having a halt.

    i just said why above the older ver dont work the gpu hard enough u need to either adjust clocks or volts  if they are stock then u should start fresh and use DDU to uninstall drivers then install 15.12 or higher then retry

    also after ever driver change u should always uninstall afterburner then reinstall after and reboot it can lead to instability if u dont
    MCXNOW MODERATOR

  • enrique3uro
    Newbie
    *
    Offline Offline

    Activity: 23
    Merit: 0


    View Profile
    January 16, 2017, 08:29:00 PM
     #10850
    Quote from: batko on January 16, 2017, 05:08:00 PM
    Claymore new miner today?
    Kernel for tonga and polaris?

    I join this request Claymore I need optimized in Kernel for tonga and polaris.

  • dinc
    Sr. Member
    ****
    Offline Offline

    Activity: 854
    Merit: 305


    View Profile
    January 16, 2017, 08:53:58 PM
     #10851
    Quote from: roony on January 16, 2017, 01:32:23 PM
    Soo, new version will be released today. Very excited  Smiley
    I hope that with new version , will be release Linux version/ Smiley

  • Swiped
    Member
    **
    Offline Offline

    Activity: 100
    Merit: 10


    View Profile
    January 16, 2017, 09:05:12 PM
     #10852
    Has anyone found a reliable bios mod for the Sapphire rx 480 8g cards that reduces power but keeps the h/s rate respectable?  Most of what I have found on forums have been unstable.  I have 4 rigs with 6x Sapphire 8g 480's that each run at around 1200w (and I have a 1300w psu) and 11.5A  and deliver 260 H/s on each card with the stock bios and I am having to reduce their intensity each time the mining software speeds the mining up or the whole platform shuts down due to exceeding power limits.  I have played with different power tools such as Watttool (Wattman is useless for multiple cards and settings in Claymore just freeze my systems) but I am a bit of an inexperienced computer user so I am not sure what to try and I don't want to damage my systems.  I have read every page of this forum as I have worked through all the same issues with Open CL and cards not being recognized, and I appreciate the degree this forum supplies ideas and methods to help others work through their issues.  So I am asking my first question around suggested settings in Watt tool or perhaps even a stable and capable bios mod that keeps power down while not giving up on the current performance, if possible.  Any help is appreciated.

  • thilan29
    Newbie
    *
    Offline Offline

    Activity: 37
    Merit: 0


    View Profile
    January 16, 2017, 09:31:26 PM
     #10853
    Quote from: Swiped on January 16, 2017, 09:05:12 PM
    Has anyone found a reliable bios mod for the Sapphire rx 480 8g cards that reduces power but keeps the h/s rate respectable?  Most of what I have found on forums have been unstable.  I have 4 rigs with 6x Sapphire 8g 480's that each run at around 1200w (and I have a 1300w psu) and 11.5A  and deliver 260 H/s on each card with the stock bios and I am having to reduce their intensity each time the mining software speeds the mining up or the whole platform shuts down due to exceeding power limits.  I have played with different power tools such as Watttool (Wattman is useless for multiple cards and settings in Claymore just freeze my systems) but I am a bit of an inexperienced computer user so I am not sure what to try and I don't want to damage my systems.  I have read every page of this forum as I have worked through all the same issues with Open CL and cards not being recognized, and I appreciate the degree this forum supplies ideas and methods to help others work through their issues.  So I am asking my first question around suggested settings in Watt tool or perhaps even a stable and capable bios mod that keeps power down while not giving up on the current performance, if possible.  Any help is appreciated.

    Wow, 1200w for 6x480?!  That's way too power much I think.  Is that at the wall?
    I have a reference 480 (stock BIOS) that runs at 1100/2000 0.85v, hashing at 230S/s and using about 100w.  You should be able to get your 480s down to MAX ~150w each while keeping stock clocks at least.

    I am using Watttool to underclock/undervolt it.

  • fr4nkthetank
    Legendary
    *
    Offline Offline

    Activity: 2294
    Merit: 1182


    Now the money is free, and so the people will be


    View Profile
    January 16, 2017, 09:31:30 PM
     #10854
    Quote from: Swiped on January 16, 2017, 09:05:12 PM
    Has anyone found a reliable bios mod for the Sapphire rx 480 8g cards that reduces power but keeps the h/s rate respectable?  Most of what I have found on forums have been unstable.  I have 4 rigs with 6x Sapphire 8g 480's that each run at around 1200w (and I have a 1300w psu) and 11.5A  and deliver 260 H/s on each card with the stock bios and I am having to reduce their intensity each time the mining software speeds the mining up or the whole platform shuts down due to exceeding power limits.  I have played with different power tools such as Watttool (Wattman is useless for multiple cards and settings in Claymore just freeze my systems) but I am a bit of an inexperienced computer user so I am not sure what to try and I don't want to damage my systems.  I have read every page of this forum as I have worked through all the same issues with Open CL and cards not being recognized, and I appreciate the degree this forum supplies ideas and methods to help others work through their issues.  So I am asking my first question around suggested settings in Watt tool or perhaps even a stable and capable bios mod that keeps power down while not giving up on the current performance, if possible.  Any help is appreciated.

    why not just download MSI afterburner, and bring voltage down to about -75mv to start off, see if its stable.  1200w is too much !  By undervolting you'll get a lot of power savings.

  • rpg
    Hero Member
    *****
    Offline Offline

    Activity: 728
    Merit: 500



    View Profile
    January 16, 2017, 09:37:31 PM
     #10855
    question:

    looking to buy riser cards but only seem to find on ebay the ones that use the SATA power. Isn't that too little power? Should we use the ones that connect to a 6 pin from the PSU instead? tia

    edit: isn't a straight extension cable enough?

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    January 16, 2017, 09:43:47 PM
     #10856
    v11.1:

    - improved speed, about 365H/s on stock 390X, 385H/s on stock Nano, 260H/s on stock 280X, 260H/s on stock RX480.
    - improved compatibility.
    - some bug fixes and minor improvements.

    NOTES:
    1. It seems there is no way to get full speed on latest drivers for Fiji and Polaris cards, at least in Windows. So don't use latest drivers for Fury, use 15.12 or 16.3.2. Since old drivers don't support Polaris, there is no way to get full speed for these cards at all, at least in Windows.
    2. Tonga - currently I cannot get enough speedup from assembler for this card so I did not include assembler kernel for this card.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • rpg
    Hero Member
    *****
    Offline Offline

    Activity: 728
    Merit: 500



    View Profile
    January 16, 2017, 09:51:24 PM
     #10857
    5% on 290x modded as 390x to 345
    just a couple hashes on rx480 8 gig to 282

  • Tomorrowman
    Member
    **
    Offline Offline

    Activity: 74
    Merit: 10


    View Profile
    January 16, 2017, 09:54:27 PM
     #10858
    Windows 10
    16.9.1
    rx480 8g 1303/1950 (1500 strap, -100mV)
    -a 2
    -i 7
    v. 10:  270-271
    v.11.1: 272-274

     Cry

  • KL0nLutiy
    Member
    **
    Offline Offline

    Activity: 158
    Merit: 10


    View Profile
    January 16, 2017, 09:59:46 PM
     #10859
    Quote from: Claymore on January 16, 2017, 09:43:47 PM
    v11.1:

    - improved speed, about 365H/s on stock 390X, 385H/s on stock Nano, 260H/s on stock 280X, 260H/s on stock RX480.
    - improved compatibility.
    - some bug fixes and minor improvements.

    NOTES:
    1. It seems there is no way to get full speed on latest drivers for Fiji and Polaris cards, at least in Windows. So don't use latest drivers for Fury, use 15.12 or 16.3.2. Since old drivers don't support Polaris, there is no way to get full speed for these cards at all, at least in Windows.
    2. Tonga - currently I cannot get enough speedup from assembler for this card so I did not include assembler kernel for this card.

    No Tonga speedup  Cry

  • Hurtman
    Full Member
    ***
    Offline Offline

    Activity: 180
    Merit: 100


    View Profile
    January 16, 2017, 10:00:33 PM
     #10860
    What a best algo for RX 480 ?
    Auto set a 2
    Pages: « 1 ... 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 [543] 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 ... 759 »
      Print  
Page 542
Viewing Page: 543

IRLBTC™ © 2025 IRLBTC.com