I wasted a day on that coin. Got zero blocks after dropping 3200w on it for 24h. I see some that have in the TH also get zero blocks in +24h.

this seems to be right http://whattomine.com/coins/172-pasc-pascal

didn't know they still have pascal compilers around. Is the miner running on ms-dos?

Or maybe instead of a diaper he has a crap bucket???

Insufficient memory message is generally not related to the available memory on your GPU but rather the size of the swap file on your HD/SSD. Make sure you have it set to 16GB+

Golden Crap bucket if there is one 

There are fluctuations, but 20% is a bit too much.
What are u mining and what hardware?

on dwarfpool is ok. on flypool isn't...

 Pair of stock Sapphire RX470 4GB ref-type cards, 1250/1750 clocks -72 mv and 100% power limit in afterburner, 233 and 235 sol/s, Claymore 10 under Win7

 Claymore 11.1 did NOT offer any improvement in hashrate over 11 and I don't think 11 had any improvement over 10 for the RX series.

 16.9.2 or 16.10.1 drivers (I forget which offhand, but I've found no noticeable hashrate difference between the 2).

 I DID find that the 16.12.1 Relive junk COST about 5% hashrate in all of my testing with it, have ignored the Relive bloatware since then (and will CONTINUE to ignore it until/unless I buy a more recent AMD card that REQUIRES newer drivers).

Whattomine is not right, I'm making $3.70/GH on Nanopool.
2 480's is drawing 280W power for about 1.1-1.2GH.

Ofc the stats are wrong, coin has `inactive` status.

I tried to use difficulty from nanopool yesterday, but it doesnt match the calculations with wallet net_hash_rate.