Bitcointalk Mobile Browser presented by IRLBTC™

2.09Mhash/s then. Damn that is really low.
Especially with say 5 of us getting 20khash/s almost 1% of the entire worlds hashing power :-p

I'm not sure how is that network hashrate calculated.

For example, the yacointalk pool has 0.19 Mhash/s, but they also have a 40% invalid rate (and they are not the only pool with extra high invalid rate), and so if that's 40% invalid is calculated into the network's hashrate, we might have an even bigger slice of the cake because we're not submitting invalids, like at all.

Yep. If they have 40% overall invalids. Just Christian's rig if he can get it to 15khash/s would be over 1% of the global hash rate.

As the global rate would be about 1.2Mhash/s
Hell my rig is almost 0.5% of the global hash rate.
The cudaminer pool! One pool to rule them all! :-p

Edit: And oops, I did mean to put 47 not 27, my fault

Quote from: bigjme on January 12, 2014, 02:22:15 AM

Actually, the yac.coinmine.pl pool is 1.5 MH all by itself - That pool is reporting over 2 MH as the overall hashrate, which sounds abut right with the way the difficulty is growing.

Yes but 2MH/s and 40% invalid rate drops it down to roughly 1.2MH/s of valids. Maybe a little more

That is if invalids count towards the overall hash rate. Which personally I dont think they should. As invalid shares dont count in a pool

Edit
One thing I have been wondering is if there is any way to get say a cron job to run that checks for new transactions in your wallet and emails you when you find a block. That would be very useful when im out and want to check how my miner is doing

I'm not sure where you're getting your invalid rate. The rates reported by the pool are accepted shares only

They were posted by another user so I am just using their figures. Nothing I have checked myself

It looks like if you ran "yacoin-qt getbalance" it should show your current balance. Havent tested it yet though

Switched over to Linux today, getting 4 kH/s on one of my 780s with T23x1. I can't use that config with the card I have connected to my monitor, though, runs out of VRAM. Dropped down to T17x1 on the other card and getting 7 kH/s combined, not bad

Made another spreadsheet/survey combo this time specifically for scrypt-jane, not sure if it will have any use considering how rapidly things are changing, but there you go:

Scrypt-jane sheet

Scrypt-jane survey

The most important thing I'd like to see over time is the performance difference between N factors.

does -H 1 not work in Jane yet? my cpu load is ~5%

Quote from: bathrobehero on January 12, 2014, 05:02:12 AM

Made another spreadsheet/survey combo this time specifically for scrypt-jane, not sure if it will have any use considering how rapidly things are changing, but there you go:

Sheet: https://docs.google.com/spreadsheet/ccc?key=0Aj3vcsuY-JFNdERoRWIyOXp3bzg2TWdveWNudWxaVkE&usp=sharing#gid=0
Survey: https://docs.google.com/forms/d/1a7un5pFsmeLoH7AVZJp6FRUS8e3ZrjninwIStWB_gDc/viewform

The most important thing I'd like to see over time is the performance difference between N factors.

Thanks for doing this again! Wink

Quote from: manofcolombia on January 12, 2014, 07:18:16 AM

does -H 1 not work in Jane yet? my cpu load is ~5%

I have to force this to -H 0 as the Kekkac code is neither parallelized, nor SSE2-optimized at the moment.

I have been using cudaminer successfully for past few weeks. Thanks to cbuchner. I am waiting for the scrypt-jane version so that i can finally have 1 of any coin. Grin

So why is everybody mining Yacoin now? And is it worth it?

Quote from: Lussekatten on January 12, 2014, 01:04:19 PM

So why is everybody mining Yacoin now? And is it worth it?

it is new so diff. is low and it shows promise for the long term as it is designed to use lots of mem for mining so most gpu cant mine at a very high rate and crash it.

@bathrobehero

where can we discuss about the google docs you have created? Is there a thread for it? I am asking coz comments are often disabled and also used for submitting changes and nobody seems to be logged in to chat.

Quote from: sambiohazard on January 12, 2014, 01:11:40 PM

Quote from: Lussekatten on January 12, 2014, 01:04:19 PM

So why is everybody mining Yacoin now? And is it worth it?

it is new so diff. is low and it shows promise for the long term as it is designed to use lots of mem for mining so most gpu cant mine at a very high rate and crash it.

New?

Yacoin has been out a while but its new to us here. And the difficulty is still very low because its still relatively new to other people aswell. Dont forget that cryptomining alt coins didnt surge in popularity till a few months back

Quote from: Thirtybird on January 12, 2014, 02:33:31 PM

Quote from: sambiohazard on January 12, 2014, 01:11:40 PM

Quote from: Lussekatten on January 12, 2014, 01:04:19 PM

So why is everybody mining Yacoin now? And is it worth it?

it is new so diff. is low and it shows promise for the long term as it is designed to use lots of mem for mining so most gpu cant mine at a very high rate and crash it.

New?

for me anything you can solo mine is new Tongue

Its still in its infancy when you can solo mine, so it is new as far as popularity goes, even if it is almost a year old

Page 119

Viewing Page: 120