If u use the dsl modem just turn him off and on with new dynamics IP it will solve the issue

is it still hashing?
Have you tried another fan?

So with 3.8.2 non-tuned my HW error rate is like 1.5% when I was running the older tuned version it was enabling and disabling cores all the time and I had a HW error rate closer to 5%

Non tuned doesn't disable the cores, but tuned does if they return X number of errors. So with non tuned its just getting errors back from the "bad" cores, but the error rate would seem to refute that.

Sorry, just trying to get my head around it. Logically I would think that my Jupiter has the same amount of cores giving out errors regardless of the software used.

I'll leave non-tuned running for another day, output seems stable after 24 hours, but I'm still interested to see if the tuned version will make any difference to both the HW and overall avg output.

Thanks

hi people

where i can buy EVGA - SuperNOVA 1300 G

and send to Europe

cheap price

thanks anyone know

root@Jupiter-3D0:/# df -h
Filesystem                Size      Used Available Use% Mounted on
devtmpfs                245.1M         0    245.1M   0%dev
/dev/mmcblk0p3          511.7M     80.0K    511.6M   0%config




root@Jupiter-3D0:/# fdisk -l

Diskdev/mmcblk0: 1920 MB, 1920991232 bytes
4 heads, 16 sectors/track, 58624 cylinders
Units = cylinders of 64 * 512 = 32768 bytes

        Device Boot      Start         End      Blocks  Id System
/dev/mmcblk0p1   *           1        8192      262136   c Win95 FAT32 (LBA)
/dev/mmcblk0p2            8193       16384      262144   c Win95 FAT32 (LBA)
/dev/mmcblk0p3           16385       32768      524288  83 Linux

Diskdev/mmcblk0boot1: 1 MB, 1048576 bytes
4 heads, 16 sectors/track, 32 cylinders
Units = cylinders of 64 * 512 = 32768 bytes

Diskdev/mmcblk0boot1 doesn't contain a valid partition table

Diskdev/mmcblk0boot0: 1 MB, 1048576 bytes
4 heads, 16 sectors/track, 32 cylinders
Units = cylinders of 64 * 512 = 32768 bytes

Diskdev/mmcblk0boot0 doesn't contain a valid partition table


The doesn't contain a valid partition table bit bothers me.

TaggedYa

TaggedYa,

I'm wondering whether you removed the first line from the cgminer.sh ?

Your quoted script is missing

concerning the log file, It was an educated guess - sorry It did not help
you could search for the log-file location with

It seems you've missed the leading slash before etc, YES?  Stupid error

Results:

root@Jupiter-3D0:~#etc/init.d/cgminer.sh restart
Restarting Cgminer daemon: killall: cgminer: no process killed
Error: Write failed


root@Jupiter-3D0:~#etc/init.d/cgminer.sh start
Starting Cgminer daemon: Error: Write failed


root@Jupiter-3D0:~#etc/init.d/cgminer.sh stop
Stopping Cgminer daemon: killall: cgminer: no process killed
cgminer.

TaggedYa

strange.

since there're a lot of things going on when you issue a cgminer.sh start and a lot of those are related with the initialization of the asic boards I'm afraid that there's something wrong going on in this phase.
this are all the tasks performed:


all of them involved some sort of i2cset command executions.

If I were you I would join #kncminer channel on freenode and try to ask hno (an OrSoC eng) if he have an idea of what's going on.

I have been trying to figure out why two of my boards (one new, one old) from upgrading my Saturn now are reporting dead dies 0-3 with no output wattage for the two boards. Running enablecores hasn't changed anything, and firmware 0.98.1 didnt work and neither did the older firmwares. They both don't hash on any port now and I'm running a XFX Black Edition 1050W with a Seasonic 1250W Gold coming in later today. My bertmod output with the two dead boards are below:

Mining Status

CGMiner Status   Running (pid=1642)
Last Checked   Sun Nov 24 21:46:28 UTC 2013
Avg. Hash Rate   0 Gh/s
WU   0
Difficulty Accepted    0
HW Status

ASIC slot #1   -
ASIC slot #2   -
ASIC slot #3   29.5 ℃
ASIC slot #4    -
ASIC slot #5   28.5 ℃
ASIC slot #6   -
STATUS=S
When=1385243153
Code=11
Msg=Summary
Description=cgminer 3.8.1|SUMMARY
Elapsed=496
MHS av=0.00
MHS 5s=0.00
Found Blocks=0
Getworks=22
Accepted=0
Rejected=0
Hardware Errors=0
Utility=0.00
Discarded=34
Stale=0
Get Failures=0
Local Work=553
Remote Failures=0
Network Blocks=4
Total MH=0.0000
Work Utility=0.00
Difficulty Accepted=0.00000000
Difficulty Rejected=0.00000000
Difficulty Stale=0.00000000
Best Share=0
Device Hardware%=0.0000
Device Rejected%=0.0000
Pool Rejected%=0.0000
Pool Stale%=0.0000|
ASIC Board   Info
2   
Temperature sensor: 29.5 C

Die ID   Cores ON   Cores OFF    %
0   0    48   0
1    0   48   0
2   0   48   0
3   0   48    0
DC/DC ID   ON/OFF   Status   Input Voltage    Output Voltage   Output Current
0   ON   OK   12.1 V   0.774 V   0.188 A
1   No DC/DC detected
2   ON   OK   12.1 V   0.756 V    0.125 A
3   No DC/DC detected
4   ON   OK   12.1 V    0.761 V   0.125 A
5    No DC/DC detected
6    No DC/DC detected
7   ON   OK   12.1 V    0.766 V   0.375 A
4   
Temperature sensor: 28.5 C

Die ID   Cores ON    Cores OFF   %
0    0   48   0
1   0   48   0
2   0   48    0
3   0    48   0
DC/DC ID   ON/OFF   Status    Input Voltage   Output Voltage   Output Current
0   ON   OK   12.1 V   0.783 V    0.312 A
1   No DC/DC detected
2   ON   OK   12.1 V    0.771 V   0.312 A
3    No DC/DC detected
4   ON   OK   12.1 V    0.742 V   0.25 A
5    No DC/DC detected
6    No DC/DC detected
7   ON   OK   12.1 V    0.771 V   0.375 A
Total DC/DC power output: 0 W

Put a voltmeter on your power supplys and check you have ~5v and ~12v.  Also, I found my 4 pin molex could have been a little loose on the pins and closed the "tubes" a bit to fit more snugly on the board mounted 4 pin molex pins.