<<  >> (p.261)
    Author Topic: EWBF's CUDA Zcash miner  (Read 2164374 times)

    • Acrefawn
    Member
    **
    Offline Offline

    Activity: 118
    Merit: 13

    FarmWatchBot script Developer


    View Profile WWW
    November 27, 2017, 09:11:22 PM
    Last edit: November 27, 2017, 09:46:52 PM by Acrefawn
     #5201
    Hello guys (again)!
    Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, CLAYMORE miners or needs some extra control over your rigs please read carefully my message below.

    I want to introduce to you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community.

    1) https://bt.irlbtc.com/view/2071108.0
    2) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640

    It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed.
    Enjoy your life, let the script to monitor your rigs for you.
    FarmWatchBot script Developer

  • carlo_0000
    Legendary
    *
    Offline Offline

    Activity: 1281
    Merit: 1003


    View Profile
    November 28, 2017, 01:54:17 AM
     #5202
    Quote from: rampaige on November 27, 2017, 08:10:01 AM
    Hi,
    I have 24 Nvidia 1070 cards and one of these cards gives me 0 sol in every Equihash algorithms.Also tested multiple drivers and windows 10 versions and my 2 year mining experience didn't help me either.This card works perfectly on every algorithms such as ethash (32 mhs on ethereum).Moreover, I disabled overclocking completely but still have this 0 sol issue.This rig that this gpu is on has 6gpus when I use (--cuda_devices 0 1 3 4 5) command all of my 5 gpus give around 450 hash but when remove this code in order to mine with 6 gpus, that specific gpu chooses solver 3 and makes all 6 cards 0 sol!!
    please give me a solution
    Peace

    did you change the card from pci slot to see what happen ?

  • Kejvu
    Member
    **
    Offline Offline

    Activity: 70
    Merit: 10


    View Profile
    November 28, 2017, 03:50:55 AM
     #5203
    How can I disable fee at EWBF and is there any drop in hasrate? i'v been seen some invalid shares with dstm's miner...

  • bigjee
    Full Member
    ***
    Offline Offline

    Activity: 434
    Merit: 107



    View Profile
    November 28, 2017, 04:16:52 AM
     #5204
    Quote from: thesavoyard on November 27, 2017, 07:48:08 AM
    Has EWBF been on here at all? It's a great miner but it needs an auto-restart function. I think his competition is still actively working on their miner. If he doesn't do some improvements, I think he'll start losing money.

    There is an auto start already.
    Free to use:
    https://bt.irlbtc.com/view/2071108.0

  • jpl
    Member
    **
    Offline Offline

    Activity: 154
    Merit: 11


    View Profile
    November 28, 2017, 04:47:49 AM
     #5205
    Quick power supply question.. Should I run with econ on?.. or off?  Its a 1300W gold powering 6 1070's.
    thx

  • shibob
    Full Member
    ***
    Offline Offline

    Activity: 672
    Merit: 154


    Blockchain Evangelist.


    View Profile WWW
    November 28, 2017, 04:59:05 AM
     #5206
    Quote from: jpl on November 28, 2017, 04:47:49 AM
    Quick power supply question.. Should I run with econ on?.. or off?  Its a 1300W gold powering 6 1070's.
    thx

    I think you do not need to turn eco mode on. 1300W is too enough for 6x1070 already. I'm using 1250W to power 6x1070 as well, and I usually run it with about 80% power limit.

  • jpl
    Member
    **
    Offline Offline

    Activity: 154
    Merit: 11


    View Profile
    November 28, 2017, 05:09:23 AM
     #5207
    Quote from: shibob on November 28, 2017, 04:59:05 AM
    Quote from: jpl on November 28, 2017, 04:47:49 AM
    Quick power supply question.. Should I run with econ on?.. or off?  Its a 1300W gold powering 6 1070's.
    thx

    I think you do not need to turn eco mode on. 1300W is too enough for 6x1070 already. I'm using 1250W to power 6x1070 as well, and I usually run it with about 80% power limit.

    Thanks   Only asking because I had 3 cards running into one SATA and it looked like it melted the connection,.. thus stopping 3 of my cards.  Had to use another cable.

  • QuintLeo
    Legendary
    *
    Offline Offline

    Activity: 1498
    Merit: 1030


    View Profile
    November 28, 2017, 10:35:48 AM
     #5208
    Quote from: amdaxiom on November 27, 2017, 05:12:39 AM
    Anyone have issues with their miner dropping to 0 sol's on each of their cards?  I'm using 4x1070's and 2x1080's with driver 388.0 on Flypool.  Another friend is using 4x1080ti's with 388 as well and also on Flypool.

    Usually if the miner crashes I can see it restart but when it does the 0 sol's thing it never restarts.  I was hoping there was a newer version of EWBF but unfortunately there isn't.

     Generally a hardware or driver issue, where the miner TRIED to restart several times and eventually gave up.



     "ECO mode" on the EVGA G2 1300 (and other EVGA models with that switch and the Seasonic variant on the same theme) doesn't really matter either way, the only thing it does it to allow the fan to power completely off if the PS is cool enough and in a mining rig the PS isn't going to be cool enough for very long even at startup.

     I prefer to leave it OFF as a troubleshooting measure.
    I'm no longer legendary just in my own mind!
    Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
    1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)

  • QuintLeo
    Legendary
    *
    Offline Offline

    Activity: 1498
    Merit: 1030


    View Profile
    November 28, 2017, 10:38:41 AM
     #5209
    Quote from: rampaige on November 27, 2017, 08:10:01 AM
    Hi,
    I have 24 Nvidia 1070 cards and one of these cards gives me 0 sol in every Equihash algorithms.Also tested multiple drivers and windows 10 versions and my 2 year mining experience didn't help me either.This card works perfectly on every algorithms such as ethash (32 mhs on ethereum).Moreover, I disabled overclocking completely but still have this 0 sol issue.This rig that this gpu is on has 6gpus when I use (--cuda_devices 0 1 3 4 5) command all of my 5 gpus give around 450 hash but when remove this code in order to mine with 6 gpus, that specific gpu chooses solver 3 and makes all 6 cards 0 sol!!
    please give me a solution
    Peace

     --cuda devices 0 1 2 3 4 5

     You are TELLING EBWF to ignore device 2 with your command line, and removing it entirely disables ALL the devices IIRC.
    I'm no longer legendary just in my own mind!
    Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
    1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)

  • selfblumpkin
    Jr. Member
    *
    Offline Offline

    Activity: 119
    Merit: 2


    View Profile
    November 28, 2017, 12:20:36 PM
     #5210
    Quote from: jpl on November 28, 2017, 05:09:23 AM
    Quote from: shibob on November 28, 2017, 04:59:05 AM
    Quote from: jpl on November 28, 2017, 04:47:49 AM
    Quick power supply question.. Should I run with econ on?.. or off?  Its a 1300W gold powering 6 1070's.
    thx

    I think you do not need to turn eco mode on. 1300W is too enough for 6x1070 already. I'm using 1250W to power 6x1070 as well, and I usually run it with about 80% power limit.

    Thanks   Only asking because I had 3 cards running into one SATA and it looked like it melted the connection,.. thus stopping 3 of my cards.  Had to use another cable.

    Three risers on one sata cable is the reason i have 3 melted sata ports. You think i would have learned after the first, or even the second! nope. On the third one i said to myself, "maybe 3 risers are too much for a sata cable". Turns out that those risers pull 60W between the three of them. 12v 5A.

  • QuintLeo
    Legendary
    *
    Offline Offline

    Activity: 1498
    Merit: 1030


    View Profile
    November 28, 2017, 09:29:53 PM
     #5211
    The PCI-E bus specification allows for 75 watts draw - that's over 6 amps at 12 VDC PER RISER- and some cards are known to exceed that specification on short peaks at times.

     It also exceeds the 4.5 amp RATING for the actual SATA power connector.

     Using SATA on a powered riser at all is asking for trouble.
    I'm no longer legendary just in my own mind!
    Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
    1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)

  • jpl
    Member
    **
    Offline Offline

    Activity: 154
    Merit: 11


    View Profile
    November 29, 2017, 06:58:31 AM
     #5212
    Quote from: QuintLeo on November 28, 2017, 09:29:53 PM
    The PCI-E bus specification allows for 75 watts draw - that's over 6 amps at 12 VDC PER RISER- and some cards are known to exceed that specification on short peaks at times.

     It also exceeds the 4.5 amp RATING for the actual SATA power connector.

     Using SATA on a powered riser at all is asking for trouble.



    I just switched my cables from power supply,.. so its just 1 cable powering 2 cards each.  (So now it's 3 cables to the 6 1070's separated)   all seems very cool now. 
    Not sure if this was 'actually' the issue though,.. I downloaded MSI Afterburner from a site that didn't match the actual 'site's' download file size.   works now.  Could be either issue.
    Thanks guys.

  • flip4flop
    Full Member
    ***
    Offline Offline

    Activity: 378
    Merit: 135



    View Profile
    November 29, 2017, 06:01:12 PM
     #5213
    How do I get the average sols/s and/or wattage to display every so often so I can track efficiency? Is this something I do in the .bat file if so could someone tell me how?

    Thanks!

  • m1n1ngP4d4w4n
    Full Member
    ***
    Offline Offline

    Activity: 224
    Merit: 100

    CryptoLearner


    View Profile
    November 29, 2017, 09:01:11 PM
     #5214
    Quote from: flip4flop on November 29, 2017, 06:01:12 PM
    How do I get the average sols/s and/or wattage to display every so often so I can track efficiency? Is this something I do in the .bat file if so could someone tell me how?

    Thanks!

    How about reading the first page of this topic...

    Code:
    Version 0.3.3b
    Added option --pec power efficiency calculator.
    Added option --fee developer fee control.
    Use miner --help command for more information.

     Roll Eyes

  • flip4flop
    Full Member
    ***
    Offline Offline

    Activity: 378
    Merit: 135



    View Profile
    November 29, 2017, 09:19:00 PM
     #5215
    how about you....thanks  Tongue

  • Hotmetal
    Sr. Member
    ****
    Offline Offline

    Activity: 378
    Merit: 250


    View Profile
    November 30, 2017, 07:57:51 PM
     #5216
    Quote from: EWBF_ on December 07, 2016, 11:53:30 AM
    Version 0.3.4b.

    EWBF's Zcash cuda miner.
    Expected speeds 444 sols/s gtx1070. Stock settings.

    How? Stock Asus 1070 Strix OC i'm getting 400.. :/

  • halker2010
    Sr. Member
    ****
    Offline Offline

    Activity: 532
    Merit: 250

    The harder your life is the more meaning it has.


    View Profile
    November 30, 2017, 08:02:08 PM
     #5217
    Quote from: Hotmetal on November 30, 2017, 07:57:51 PM
    Quote from: EWBF_ on December 07, 2016, 11:53:30 AM
    Version 0.3.4b.

    EWBF's Zcash cuda miner.
    Expected speeds 444 sols/s gtx1070. Stock settings.

    How? Stock Asus 1070 Strix OC i'm getting 400.. :/
    the expected hashrate is not true you need around 600 on mclock and 100 on cclock to get that hashrate if you want to gain better hashrate try zm miner i get around 480-490 on my asus 1070s.

  • QuintLeo
    Legendary
    *
    Offline Offline

    Activity: 1498
    Merit: 1030


    View Profile
    November 30, 2017, 11:56:39 PM
     #5218
    Depends on the 1070 - I get 400 at about 102 watts TDP on my EVGA SC and Gigabyte ITX model 1070s (bit under 70% TDP for those models), none of which run AT ALL at +600 on memory clock (they CRASH in no time flat if they run at all) but do use +100 core +100 memory.

     Stock at stock TDP, most 1070 models should easily get to 430 sol/s and the higher-power ones (Gigabite Windforce and Gaming models, EVGA FTW, and OMG that crazy MSI Gaming model with the 240 watt default TDP. among others I've NOT personally used) should get somewhat more.

     DSTM for me is a mixed bag - a little faster at some settings, usually SAME or SLOWER at most "high efficiency settings", while eating more FEE % than EBWF can be set for.

     "Fixed 2%" fee is a RIPOFF when there are other miner programs with VERY similar capability, and IMO it's a ripoff in general.
    I'm no longer legendary just in my own mind!
    Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
    1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)

  • carlo_0000
    Legendary
    *
    Offline Offline

    Activity: 1281
    Merit: 1003


    View Profile
    December 01, 2017, 04:49:08 AM
     #5219
    Quote from: QuintLeo on November 30, 2017, 11:56:39 PM
    Depends on the 1070 - I get 400 at about 102 watts TDP on my EVGA SC and Gigabyte ITX model 1070s (bit under 70% TDP for those models), none of which run AT ALL at +600 on memory clock (they CRASH in no time flat if they run at all) but do use +100 core +100 memory.

     Stock at stock TDP, most 1070 models should easily get to 430 sol/s and the higher-power ones (Gigabite Windforce and Gaming models, EVGA FTW, and OMG that crazy MSI Gaming model with the 240 watt default TDP. among others I've NOT personally used) should get somewhat more.

     DSTM for me is a mixed bag - a little faster at some settings, usually SAME or SLOWER at most "high efficiency settings", while eating more FEE % than EBWF can be set for.

     "Fixed 2%" fee is a RIPOFF when there are other miner programs with VERY similar capability, and IMO it's a ripoff in general.


    i have my first 4x 1070's   
    so i put +80 on gpu and + 100 on memory power limit 95%

    GPU0: 422 Sol/s GPU1: 414 Sol/s GPU2: 410 Sol/s GPU3: 364 Sol/s   why is the last so slow ?
    i have so display connected to the computer

  • Atexor
    Member
    **
    Offline Offline

    Activity: 155
    Merit: 10


    View Profile
    December 01, 2017, 06:30:28 PM
     #5220
    Quote from: carlo_0000 on December 01, 2017, 04:49:08 AM
    i have my first 4x 1070's   
    so i put +80 on gpu and + 100 on memory power limit 95%

    GPU0: 422 Sol/s GPU1: 414 Sol/s GPU2: 410 Sol/s GPU3: 364 Sol/s   why is the last so slow ?
    i have so display connected to the computer

    If I understand well, you've connected one gpu to your display? You've reason there. When I mined LBRY few months ago I had that situation. I had approx. 360-370 Mh/s. After connecting my display to iGPU it raised to almost 400Mh/s. It all depends on algorithm that you use, but display steals a bit of graphics card performance.
    Pages: « 1 ... 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 [261] 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 »
      Print  
Page 260
Viewing Page: 261

IRLBTC™ © 2025 IRLBTC.com