<<  >> (p.38)
    Author Topic: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]  (Read 166792 times)
    This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.

    • ehwwong
    Newbie
    *
    Offline Offline

    Activity: 28
    Merit: 0


    View Profile
    March 07, 2014, 08:28:33 AM
     #741
    OK,

    so exactly what i did.

    removed the previous gridseed5
    unplug my miner and plug it back
    run sudo kextload -b com.FTDI.driver.FTDIUSBSerialDriver at terminal
    start gridseed6
    GPU miner pops up automatically. Close it.
    Click on cgminer and insert the manual flag - --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0
    Check on pool settings.. click save
    and then START...

    unfortunately still getting the same error below.


    2014-03-07 16:25:02] Started cgminer 3.8.5
     [2014-03-07 16:25:02] Loaded configuration fileUsers/ericwong/Library/Application Support/MacMiner/bfgurls.conf
     [2014-03-07 16:25:03] gridseed detect (253:6) failed to initialise (incorrect device?)
     [2014-03-07 16:25:03] No devices detected!
     [2014-03-07 16:25:03] Waiting for USB hotplug devices or press q to quit
     [2014-03-07 16:25:03] Probing for an alive pool
     [2014-03-07 16:25:06] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332
     [2014-03-07 16:25:07] Pool 0 difficulty changed to 205.124450
     [2014-03-07 16:25:08] Pool 0 difficulty changed to 189.594947
     [2014-03-07 16:25:08] Network diff set to 3.81G
     [2014-03-07 16:25:09] Stratum from pool 0 requested work restart
     [2014-03-07 16:25:13] API running in IP access mode on port 4048 (24)
     [2014-03-07 16:25:02] Started cgminer 3.8.5                   
     [2014-03-07 16:25:02] Loaded configuration fileUsers/ericwong/Library/Application Support/MacMiner/bfgurls.conf                   
     [2014-03-07 16:25:03] gridseed detect (253:6) failed to initialise (incorrect device?)                   
     [2014-03-07 16:25:03] No devices detected!                   
     [2014-03-07 16:25:03] Waiting for USB hotplug devices or press q to quit                   
     [2014-03-07 16:25:03] Probing for an alive pool                   
     [2014-03-07 16:25:06] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332                   
     [2014-03-07 16:25:07] Pool 0 difficulty changed to 205.124450                   
     [2014-03-07 16:25:08] Pool 0 difficulty changed to 189.594947                   
     [2014-03-07 16:25:08] Network diff set to 3.81G                   
     [2014-03-07 16:25:09] Stratum from pool 0 requested work restart                   
     [2014-03-07 16:25:13] API running in IP access mode on port 4048 (24)                   
    (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m         
     [2014-03-07 16:25:15] gridseed detect (253:6) failed to initialise (incorrect device?)
     [2014-03-07 16:25:15] gridseed detect (253:6) failed to initialise (incorrect device?)                   
    (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m         
     [2014-03-07 16:25:21] gridseed detect (253:6) failed to initialise (incorrect device?)

  • BrandonMcPherson
    Full Member
    ***
    Offline Offline

    Activity: 205
    Merit: 100


    View Profile
    March 07, 2014, 08:44:51 AM
     #742
    Quote from: ehwwong on March 07, 2014, 05:09:30 AM
    Quote from: BrandonMcPherson on March 07, 2014, 05:04:14 AM
    I wasn't able to duplicate ehwwong's success with CPUminer, and CGminer returned the same "failed to initialise (incorrect device?)" error he saw.

    I suspect my CPUminer issue is related to my virtual machine Linux installation still claiming the device, so don't make too much of that. I'll fiddle with it some more. Smiley

    Brandon,

    Did you setup the manual flag - --freq=600 --gc3355=/dev/cu.usbmodemfdxxxx  ?

    I did, but my Mac wasn't recognizing the device, even though my Linux virtual machine did. This was all a 5 minute test and I haven't had time to dig into it yet.

  • Anonymailer (OP)
    aka BitBacco
    Hero Member
    *****
    Offline Offline

    Activity: 662
    Merit: 500



    View Profile WWW
    March 07, 2014, 09:52:49 PM
     #743
    Quote from: ehwwong on March 07, 2014, 08:28:33 AM
    OK,

    so exactly what i did.

    removed the previous gridseed5
    unplug my miner and plug it back
    run sudo kextload -b com.FTDI.driver.FTDIUSBSerialDriver at terminal
    start gridseed6
    GPU miner pops up automatically. Close it.
    Click on cgminer and insert the manual flag - --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0
    Check on pool settings.. click save
    and then START...

    unfortunately still getting the same error
    Can you please try this version with the drivers unloaded?
    MacMiner - The first, best and easiest to use native Mac coin mining app: https://bt.irlbtc.com/view/197110.0

    BTC: 12vZf8mjaXvHorXWVWfv7nZspHa8L8kfoG LTC: LLRqwo3YcLqoRyfZRVmUevtd2Y35Vvnt4w

  • zinge
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    March 08, 2014, 12:08:53 AM
     #744
    Not sure where to post so hopefully this is the right place..

    I'm trying to use MacMiner on a Mac Pro with Radeon 5870 to do GPU scrypt mining. My pool settings all work (tested and working with the CPU miner). When I try to use GPU, the output lists new blocks, but it doesn't seem to actually be doing any work. No mh listing and no accepted/rejected or number of threads running or anything. Also, my RAM usage spikes out of control and eats up like 8GB ram in 2 minutes and then continues on into swap, and I have to reboot to fix everything. I'm just using the recommended settings button (intensity at 4, also tried at 11, everything else auto).

    Any ideas?

  • Anonymailer (OP)
    aka BitBacco
    Hero Member
    *****
    Offline Offline

    Activity: 662
    Merit: 500



    View Profile WWW
    March 08, 2014, 12:41:54 AM
     #745
    Quote from: zinge on March 08, 2014, 12:08:53 AM
    Not sure where to post so hopefully this is the right place..

    I'm trying to use MacMiner on a Mac Pro with Radeon 5870 to do GPU scrypt mining. My pool settings all work (tested and working with the CPU miner). When I try to use GPU, the output lists new blocks, but it doesn't seem to actually be doing any work. No mh listing and no accepted/rejected or number of threads running or anything. Also, my RAM usage spikes out of control and eats up like 8GB ram in 2 minutes and then continues on into swap, and I have to reboot to fix everything. I'm just using the recommended settings button (intensity at 4, also tried at 11, everything else auto).

    Any ideas?
    Hey, what OS version are you running? I know GPU mining isn't working on 10.6 but CPU mining is… Also, which version of MacMiner?
    MacMiner - The first, best and easiest to use native Mac coin mining app: https://bt.irlbtc.com/view/197110.0

    BTC: 12vZf8mjaXvHorXWVWfv7nZspHa8L8kfoG LTC: LLRqwo3YcLqoRyfZRVmUevtd2Y35Vvnt4w

  • zinge
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    March 08, 2014, 06:09:43 AM
     #746
    Quote from: Anonymailer on March 08, 2014, 12:41:54 AM
    Quote from: zinge on March 08, 2014, 12:08:53 AM
    Not sure where to post so hopefully this is the right place..

    I'm trying to use MacMiner on a Mac Pro with Radeon 5870 to do GPU scrypt mining. My pool settings all work (tested and working with the CPU miner). When I try to use GPU, the output lists new blocks, but it doesn't seem to actually be doing any work. No mh listing and no accepted/rejected or number of threads running or anything. Also, my RAM usage spikes out of control and eats up like 8GB ram in 2 minutes and then continues on into swap, and I have to reboot to fix everything. I'm just using the recommended settings button (intensity at 4, also tried at 11, everything else auto).

    Any ideas?
    Hey, what OS version are you running? I know GPU mining isn't working on 10.6 but CPU mining is… Also, which version of MacMiner?

    OSX 10.7.4
    MacMiner Version 1.5.18e (1518e)

  • zinge
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    March 08, 2014, 06:20:52 AM
     #747
    Quote from: zinge on March 08, 2014, 06:09:43 AM
    Quote from: Anonymailer on March 08, 2014, 12:41:54 AM
    Quote from: zinge on March 08, 2014, 12:08:53 AM
    Not sure where to post so hopefully this is the right place..

    I'm trying to use MacMiner on a Mac Pro with Radeon 5870 to do GPU scrypt mining. My pool settings all work (tested and working with the CPU miner). When I try to use GPU, the output lists new blocks, but it doesn't seem to actually be doing any work. No mh listing and no accepted/rejected or number of threads running or anything. Also, my RAM usage spikes out of control and eats up like 8GB ram in 2 minutes and then continues on into swap, and I have to reboot to fix everything. I'm just using the recommended settings button (intensity at 4, also tried at 11, everything else auto).

    Any ideas?
    Hey, what OS version are you running? I know GPU mining isn't working on 10.6 but CPU mining is… Also, which version of MacMiner?

    OSX 10.7.4
    MacMiner Version 1.5.18e (1518e)

    A little more troubleshooting info...

    Switched to trying to GPU mine SHA-256 and it's working fine. Looks like it's just scrypt that's not working on GPU for me. Which is unfortunate, since I'm trying to mine scrypt coins :-)

  • ehwwong
    Newbie
    *
    Offline Offline

    Activity: 28
    Merit: 0


    View Profile
    March 08, 2014, 04:23:58 PM
     #748
    Quote from: Anonymailer on March 07, 2014, 09:52:49 PM
    Quote from: ehwwong on March 07, 2014, 08:28:33 AM
    OK,

    so exactly what i did.

    removed the previous gridseed5
    unplug my miner and plug it back
    run sudo kextload -b com.FTDI.driver.FTDIUSBSerialDriver at terminal
    start gridseed6
    GPU miner pops up automatically. Close it.
    Click on cgminer and insert the manual flag - --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0
    Check on pool settings.. click save
    and then START...

    unfortunately still getting the same error
    Can you please try this version with the drivers unloaded?

    Hi,

    Unfortunately unloading the drivers did not make any difference on cgminer.

  • nwoolls
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    March 08, 2014, 05:47:14 PM
     #749
    More 2 cents from me (hope to know more later):

    The 5-chip units use the Apple CDC drivers, not FTDI drivers. Only the 1-chip units seem to use FTDI.
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • Anonymailer (OP)
    aka BitBacco
    Hero Member
    *****
    Offline Offline

    Activity: 662
    Merit: 500



    View Profile WWW
    March 09, 2014, 03:38:36 AM
     #750
    Quote from: nwoolls on March 08, 2014, 05:47:14 PM
    More 2 cents from me (hope to know more later):

    The 5-chip units use the Apple CDC drivers, not FTDI drivers. Only the 1-chip units seem to use FTDI.
    Ah, damn, what about pre 10.9?
    CDC not FTDI, right
    MacMiner - The first, best and easiest to use native Mac coin mining app: https://bt.irlbtc.com/view/197110.0

    BTC: 12vZf8mjaXvHorXWVWfv7nZspHa8L8kfoG LTC: LLRqwo3YcLqoRyfZRVmUevtd2Y35Vvnt4w

  • ehwwong
    Newbie
    *
    Offline Offline

    Activity: 28
    Merit: 0


    View Profile
    March 09, 2014, 05:17:17 AM
     #751
    Quote from: Anonymailer on March 09, 2014, 03:38:36 AM
    Quote from: nwoolls on March 08, 2014, 05:47:14 PM
    More 2 cents from me (hope to know more later):

    The 5-chip units use the Apple CDC drivers, not FTDI drivers. Only the 1-chip units seem to use FTDI.
    Ah, damn, what about pre 10.9?
    CDC not FTDI, right

    what can i do to test/confirm this?

  • nwoolls
    Hero Member
    *****
    Offline Offline

    Activity: 840
    Merit: 1002


    View Profile WWW
    March 09, 2014, 07:06:19 AM
    Last edit: March 09, 2014, 07:44:57 AM by nwoolls
     #752
    For support for the GridSeed 5-chip devices, if you are feeling crazy you can try this out (Scrypt-only atm):

    https://github.com/nwoolls/bfgminer/commits/feature/gridseed-support

    I give it the It Works For Me stamp of approval. Run it with -S gridseed:all and specify frequency with --set-device gridseed:clock=freq, e.g. 850 (default is 600).



    Also, these should be loaded automatically but in case they aren't:

    Code:
    sudo kextload -b com.apple.driver.AppleUSBCDC
    sudo kextload -b com.apple.driver.AppleUSBCDCACMData
    MultiMiner: Any Miner, Any Where, on Any Device |  Xgminer: Mine with popular miners on Mac OS X
    btc: 1BmXY4ZZQh1iHSVre658gM1gPAEtDnq8rv  |  ltc: LP1SsHZTDexndkvRKsqAkXNsienPHwaMb5  |  hardware: nwoolls at gmail dot com

  • BrandonMcPherson
    Full Member
    ***
    Offline Offline

    Activity: 205
    Merit: 100


    View Profile
    March 09, 2014, 10:30:05 PM
     #753
    Are we having fun with this yet? Smiley

  • Anonymailer (OP)
    aka BitBacco
    Hero Member
    *****
    Offline Offline

    Activity: 662
    Merit: 500



    View Profile WWW
    March 09, 2014, 11:35:54 PM
     #754
    nwoolls latest is rolled in now:

    http://downloads.fabulouspanda.co.uk/MacMiner-gridseed7.zip

    his instructions should hopefully improve on a few of the issues with the 'CPU' miner!
    MacMiner - The first, best and easiest to use native Mac coin mining app: https://bt.irlbtc.com/view/197110.0

    BTC: 12vZf8mjaXvHorXWVWfv7nZspHa8L8kfoG LTC: LLRqwo3YcLqoRyfZRVmUevtd2Y35Vvnt4w

  • shadajo2012
    Newbie
    *
    Offline Offline

    Activity: 2
    Merit: 0


    View Profile
    March 10, 2014, 07:22:59 PM
     #755
    Trying to find the right place to post this:

    Brand new to mining and Macminer (and this forum).  Hope I'm posting in the right place.  I'm just looking to mine for fun and to learn and downloaded Macminer from Cnet and went with the default settings.  I pasted in my bitcoin and litecoin addressses but when I click "Start" I get what I think is an error message (see below) followed by the pop-up telling me that bgminer has started and forcing me to click "Indeed".

    dyld: Library not loaded:Applications/MacMiner.app/Contents/Resources/bfgminer/lib/libblkmaker-0.1.0.dylib
      Referenced from:Users/shannon/Downloads/MacMiner.app/Contents/Resources/bfgminer/lib/libblkmaker_jansson-0.1.0.dylib
      Reason: image not found

    Any idea how to resolve this?

    Thanks,
    Shannon

  • Anonymailer (OP)
    aka BitBacco
    Hero Member
    *****
    Offline Offline

    Activity: 662
    Merit: 500



    View Profile WWW
    March 10, 2014, 09:49:33 PM
    Last edit: February 12, 2018, 08:46:24 AM by Anonymailer
     #756
    Quote from: shadajo2012 on March 10, 2014, 07:22:59 PM
    Trying to find the right place to post this:

    Brand new to mining and Macminer (and this forum).  Hope I'm posting in the right place.  I'm just looking to mine for fun and to learn and downloaded Macminer from Cnet and went with the default settings.  I pasted in my bitcoin and litecoin addressses but when I click "Start" I get what I think is an error message (see below) followed by the pop-up telling me that bgminer has started and forcing me to click "Indeed".

    dyld: Library not loaded:Applications/MacMiner.app/Contents/Resources/bfgminer/lib/libblkmaker-0.1.0.dylib
      Referenced from:Users/shannon/Downloads/MacMiner.app/Contents/Resources/bfgminer/lib/libblkmaker_jansson-0.1.0.dylib
      Reason: image not found

    Any idea how to resolve this?

    Thanks,
    Shannon
    Hey Shannon, it sounds as though cnet is distributing and old version, please get the new one from macminer.fabulouspanda.com and that should fix the problem for you Smiley
    MacMiner - The first, best and easiest to use native Mac coin mining app: https://bt.irlbtc.com/view/197110.0

    BTC: 12vZf8mjaXvHorXWVWfv7nZspHa8L8kfoG LTC: LLRqwo3YcLqoRyfZRVmUevtd2Y35Vvnt4w

  • BrandonMcPherson
    Full Member
    ***
    Offline Offline

    Activity: 205
    Merit: 100


    View Profile
    March 10, 2014, 10:07:27 PM
    Last edit: March 23, 2014, 12:49:47 AM by BrandonMcPherson
     #757
    Gotta love CNet—and if Anonymailer isn't controlling the release that they're distributing, it could be a host for the OSXCoinThief trojan.

    To be clear, I'm not dissing Anonymailer, but am highly critical of Downloads.com, as that site has been a distribution point for this malware, where it's been found bundled with legit software.

    Download MacMiner directly from the Fabulous Panda website.

  • conmango
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    March 12, 2014, 01:59:11 AM
     #758
    New to this here, so please be patient with me. I downloaded MacMine Grindseed7 which I believe is the latest.

    I got CPUMiner to detect my Dual Miner USB which I got to play with, but I get this in the screen, and it doesn't seem to be hashing.

    [2014-03-11 18:57:15] 0: GC3355 chip mining thread started, in SINGLE mode
    [2014-03-11 18:57:15] 0: Open UART devicedev/cu.usbserial-000014FAB
    [2014-03-11 18:57:16] 0: Set GC3355 core frequency to 600Mhz
    [2014-03-11 18:57:16] Stratum detected new block
    [2014-03-11 18:57:17] 0: Dispatching new work to GC3355 LTC core
    0: >>> LTC : 55aac000808080800000000001000000
    0: >>> LTC : 55aac000c0c0c0c00500000001000000
    0: >>> LTC : 55aaef020000000000000000000000000000000000000000
    0: >>> LTC : 55aaef3020000000
    0: >>> LTC : 55aa1f2817000000
    0: >>> LTC : 55aaef000500e082
    0: >>> LTC : 55aa1f2816000000
    0: >>> LTC : 55aa1f2817000000
    0: >>> LTC : 55aa1f00000000000000000000000000000000000000000000000000000000f8ff07000019594b6 9940bc9c152fa71f3b90733768f56c38977a58ad4064619f6b2c46edd00000002d30b7dad7725d7 22c90dd6b97a4223b4970fd97bb145926c6aec512aea648f6a24544a7739e75303c291c4aec17e9 5d88e1edc534e14de93cf6e112b29bdf416531fbe791b0dd50600000000ffffffff12345678
     |||
     ///
     ---
     \\\
     |||
     ///
     ---
     \\\
     |||
     ///
     ---
     \\\
     |||
     ///
     ---
     \\\
     |||
     ///
     ---
     \\\
     |||
     ///
     ---

    I am using this Manual string

    --freq 600 --gc3355=/dev/cu.usbserial-000014FAB

    Any help would be much appreciated.

  • BrandonMcPherson
    Full Member
    ***
    Offline Offline

    Activity: 205
    Merit: 100


    View Profile
    March 25, 2014, 07:17:36 AM
     #759
    Hey BitBacco,

    Has there been any progress on the Gridseed 5 support?

  • Anonymailer (OP)
    aka BitBacco
    Hero Member
    *****
    Offline Offline

    Activity: 662
    Merit: 500



    View Profile WWW
    March 25, 2014, 07:23:01 AM
     #760
    Quote from: BrandonMcPherson on March 25, 2014, 07:17:36 AM
    Hey BitBacco,

    Has there been any progress on the Gridseed 5 support?

    I pushed a new version which updates the bfgminer but I'm not sure whether that helps with the gridseed stuff or not. I'd be interested to hear back from anyone who tests it, I think once people got up and running Scrypt mining they lost the incentive to stop for a while and test a new setup! I should have updated here, I just posted on the MacMiner forum.
    MacMiner - The first, best and easiest to use native Mac coin mining app: https://bt.irlbtc.com/view/197110.0

    BTC: 12vZf8mjaXvHorXWVWfv7nZspHa8L8kfoG LTC: LLRqwo3YcLqoRyfZRVmUevtd2Y35Vvnt4w
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [38] 39 40 41 42 43 44 »
      Print  
Page 37
Viewing Page: 38

IRLBTC™ © 2025 IRLBTC.com