So how much for neoscrypt? Because if its 1600 per card as whattomine suggest, ETH is still by far the best @ ~44Mh/s per card @ 140W.

I'd be very interested in a SoftPP table and clocks/voltages that support a stable mining experience as per above. So far anything I've tried to fudge with my Vegas for ETH has failed miserably...

I tested Neoscrypt using Claymores miner on a vega frontier and got ~2,170kh/s. Wasn't able to test the power consumption though. I'm sure you can keep it above/around 2,000kh/s with some reasonable power consumption.

Can anyone send me stable core/memory setting for Vega 64 with Blockchain drivers?
All cards are registry modded.  I can produce ~44 MH/s, but the heath is too high. Need something working at lower rates (around 40), that is not producing that much heath.

You can reduce the core clocks to below 1000 (and voltages to below 850-875mV range) and still keep the 44 MH/s on ETH mining.  At those clocks the temperature should be fair.  

p.s. it's heat

We have good new about running VEGA in Linux.
VEGA rig is up and running in HIVE OS. If you want to try you can use referral link and promo code VEGA_ON_HIVE that will give you $10 deposit for free. Up to three rigs are free so you need it only if you want to test more rigs at once.
https://hiveos.farm?ref=12520

The new HIVE OC public list today listed working VEGA.
The guy that is running it confirmed it is no joke.

https://hiveos.farm/files/oclist.php

0,5 ETC Reward for the best answer!!!!! (If that answer works)


Hi, I'm typically getting about 1850 h/s++(This card can handle 935 mem clock) and there's 2 card only can get 1808+ h/s (If I push further more than p3 910+ I got "Invalid AMD" using xmr stak and "!Rejected, nonce invalid" using cast xmr) with my Vega 56 powercolor red devil (Hynix memory) without flashing the BIOS. Any idea how to push my vega with hynix memory? I've been following guide vega.mining.guides.com but unfortunately still same. Only got 1808-1850 hashrate. (0.5 etc reward for best answer) thankyou~~~

My rig setup : Amdblockchain driver + Following Guide circusdad (Vega.mining.guide) using powertable P3 950/900 (But, unfortunately my card can't get pass 950. Most stable setting 905-930) P7 1407/950 .

My rig spec : Motherboard Asus Z270-P , 6x Rx Vega 56 Red Devil (Hynix), PSU 2xHx850I, Intel G4400, Ram 2x 4gb team elite 2400

My real Nightmare Problem : -Crap Hashrate can't get pass 1930++ hash -If I setup AMD txt on XMR STAK with double thread intensity 1932/1932 after a few hours later got freeze and I got massage "XMR STAK Application has been blocked from accesing graphic hardware" <--- this really annoying one.

Can't find stock bios for vega 56 mem hynix to 64 , Just got massage from my friend who has similiar card with me. He was trying to mod bios 56 to 64 and....bricked... holly shit!! thank goodness vega 56 red devil has 3 diffrent bios on em.