<<  >> (p.39)
    Author Topic: Any word on amd vega hash rates?  (Read 202772 times)

    • Shnikes101
    Full Member
    ***
    Offline Offline

    Activity: 254
    Merit: 109


    View Profile
    September 27, 2017, 10:07:57 PM
     #761
    Quote from: cryptonist on September 27, 2017, 09:34:04 PM

    DonBit, great work. Can you please find some time and post a step-by-step tutorial of your specific settings? I think I seem to be missing something because I am almost there, but not quite. Thanks!

    Check out DonBit's post right before yours. Detailed step by step at Overclocker credits to hellm.

  • q37104
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    September 27, 2017, 10:41:21 PM
     #762
    Quote from: DonBit on September 27, 2017, 09:33:29 PM
    After applying the .reg and after rebooting you must go in wattman and click reset. Then click manual voltage settings and then click apply. Next to got HBCC slider. If it's on, turn off, turn on again, slide to the max and apply.

    Also note line 3, where I have 0001 is my board number as seen by Windows. Your Windows might have assigned a different number so you have to change it accordingly.

    Detailed info and source here http://www.overclock.net/t/1633446/preliminary-view-of-amd-vega-bios/250#post_26297003


    Figured it out. Had to apply the 900mV to all P-States starting from P2. Not just only P4 to P7.

  • Hellae
    Newbie
    *
    Offline Offline

    Activity: 49
    Merit: 0


    View Profile
    September 28, 2017, 12:16:44 AM
     #763
    There's one thing I haven't understood yet...
    These regedit changes are for Vega64 only, or they also improve the Vega56 above the 1850H/s from wattman alone?

    I'm unsure if I should stop the miner or not to try that out Smiley
    Worst case scenario I end with my wattman problems when one gpu decides to reset to default values, but I wonder if with 64 bios and the same vega 64 values the V56 can also reach stable >1900s

  • makeitcryptos
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 0


    View Profile
    September 28, 2017, 12:22:55 AM
     #764
    Quote from: Hellae on September 28, 2017, 12:16:44 AM
    There's one thing I haven't understood yet...
    These regedit changes are for Vega64 only, or they also improve the Vega56 above the 1850H/s from wattman alone?

    I'm unsure if I should stop the miner or not to try that out Smiley
    Worst case scenario I end with my wattman problems when one gpu decides to reset to default values, but I wonder if with 64 bios and the same vega 64 values the V56 can also reach stable >1900s

    I am interested to see if any of your vega 56s will make your system not boot(after registry edit), like it does to some of use unlucky ones with vega 64s.

  • cryptoinvestor_x
    Newbie
    *
    Offline Offline

    Activity: 71
    Merit: 0


    View Profile
    September 28, 2017, 12:39:42 AM
     #765
    Quote from: makeitcryptos on September 28, 2017, 12:22:55 AM
    Quote from: Hellae on September 28, 2017, 12:16:44 AM
    There's one thing I haven't understood yet...
    These regedit changes are for Vega64 only, or they also improve the Vega56 above the 1850H/s from wattman alone?

    I'm unsure if I should stop the miner or not to try that out Smiley
    Worst case scenario I end with my wattman problems when one gpu decides to reset to default values, but I wonder if with 64 bios and the same vega 64 values the V56 can also reach stable >1900s

    I am interested to see if any of your vega 56s will make your system not boot(after registry edit), like it does to some of use unlucky ones with vega 64s.

    Flashed on Vega 56 and it booted and hashed but crashed after 3 minutes.

    Flashed on 4 other Vega 64 and they have been running with no issues 1408/1100 900MV softplaymod

  • cybercon
    Newbie
    *
    Offline Offline

    Activity: 2
    Merit: 0


    View Profile
    September 28, 2017, 12:43:25 AM
     #766
    i read a few threads saying they only do 30mhs. these cards are maybe like the 1080s

  • makeitcryptos
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 0


    View Profile
    September 28, 2017, 03:41:28 AM
     #767
    Quote from: cryptoinvestor_x on September 28, 2017, 12:39:42 AM
    Quote from: makeitcryptos on September 28, 2017, 12:22:55 AM
    Quote from: Hellae on September 28, 2017, 12:16:44 AM
    There's one thing I haven't understood yet...
    These regedit changes are for Vega64 only, or they also improve the Vega56 above the 1850H/s from wattman alone?

    I'm unsure if I should stop the miner or not to try that out Smiley
    Worst case scenario I end with my wattman problems when one gpu decides to reset to default values, but I wonder if with 64 bios and the same vega 64 values the V56 can also reach stable >1900s

    I am interested to see if any of your vega 56s will make your system not boot(after registry edit), like it does to some of use unlucky ones with vega 64s.

    Flashed on Vega 56 and it booted and hashed but crashed after 3 minutes.

    Flashed on 4 other Vega 64 and they have been running with no issues 1408/1100 900MV softplaymod


    Thanks, that is good info! What do you think is the issue with our system not booting with certain vega 64s?

  • Blockheadz
    Jr. Member
    *
    Offline Offline

    Activity: 53
    Merit: 10


    View Profile
    September 28, 2017, 05:40:31 AM
     #768
    Here's my settings on a Powercolor Vega 56 flashed with the Vega 64 BIOS, Blockchain Driver,  v10 claymore doing ETH/DCR to get 37Mh ETH/2150 Mh DCR:
    https://imgur.com/a/gHxXS

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    September 28, 2017, 05:54:48 AM
     #769
    Quote from: Blockheadz on September 28, 2017, 05:40:31 AM
    Here's my settings on a Powercolor Vega 56 flashed with the Vega 64 BIOS, Blockchain Driver,  v10 claymore doing ETH/DCR to get 37Mh ETH/2150 Mh DCR:
    https://imgur.com/a/gHxXS
    bad settings and speed

  • brnsted
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    September 28, 2017, 06:37:08 AM
     #770
    Have been able to squeeze 41.5 MH/s running single ETH in Claymore on a Vega 56 w/ flashed 64 BIOS.
    Mem Clock @ 1040
    Core voltage @ 900mV for P3-P7 States.

    However what I find disturbing, as soon as I am setting individual maximum clock speeds for P1-P7, in some cases my windows won't boot, sometimes P7 disappears entirely(!) from Wattman or checking in OverdriveNTool. Anyone experiencing the same issues?

    Here is my working config for 1/2 of my Vega 56ers:

    Quote
    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0009]
    "PP_PhmSoftPowerPlayTable"=hex:B6,02,08,01,00,5C,00,E1,06,00,00,EE,2B,00,00,1B,\
      00,48,00,00,00,80,A9,03,00,F0,49,02,00,8E,00,08,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,02,01,5C,00,4F,02,46,02,94,00,9E,01,BE,00,28,01,7A,00,8C,00,\
      BC,01,00,00,00,00,72,02,00,00,90,00,A8,02,6D,01,43,01,97,01,F0,49,02,00,71,\
      02,02,02,00,00,00,00,00,00,08,00,00,00,00,00,00,00,05,00,07,00,03,00,05,00,\
      00,00,00,00,00,00,01,08,20,03,84,03,B6,03,84,03,84,03,84,03,84,03,84,03,01,\
      01,46,05,01,01,84,03,00,08,60,EA,00,00,00,40,19,01,00,01,80,38,01,00,02,DC,\
      4A,01,00,03,90,5F,01,00,04,00,77,01,00,05,90,91,01,00,06,6C,B0,01,00,07,01,\
      08,D0,4C,01,00,00,00,80,00,00,00,00,00,00,1C,83,01,00,01,00,00,00,00,00,00,\
      00,00,70,A7,01,00,02,00,00,00,00,00,00,00,00,88,BC,01,00,03,00,00,00,00,00,\
      00,00,00,38,C1,01,00,04,00,00,00,00,00,00,00,00,88,D5,01,00,05,00,00,00,00,\
      01,00,00,00,70,D9,01,00,06,00,00,00,00,01,00,00,00,58,DD,01,00,07,00,00,00,\
      00,01,00,00,00,00,05,60,EA,00,00,00,40,19,01,00,00,80,38,01,00,00,DC,4A,01,\
      00,00,90,5F,01,00,00,00,08,28,6E,00,00,00,2C,C9,00,00,01,F8,0B,01,00,02,80,\
      38,01,00,03,90,5F,01,00,04,F4,91,01,00,05,D0,B0,01,00,06,C0,D4,01,00,07,00,\
      08,6C,39,00,00,00,24,5E,00,00,01,FC,85,00,00,02,AC,BC,00,00,03,34,D0,00,00,\
      04,68,6E,01,00,05,08,97,01,00,06,EC,A3,01,00,07,00,01,68,3C,01,00,00,01,04,\
      3C,41,00,00,00,00,00,50,C3,00,00,00,00,00,80,38,01,00,02,00,00,40,96,01,00,\
      04,00,00,01,08,00,98,85,00,00,40,B5,00,00,60,EA,00,00,50,C3,00,00,01,80,BB,\
      00,00,60,EA,00,00,94,0B,01,00,50,C3,00,00,02,00,E1,00,00,94,0B,01,00,40,19,\
      01,00,50,C3,00,00,03,78,FF,00,00,40,19,01,00,88,26,01,00,50,C3,00,00,04,40,\
      19,01,00,80,38,01,00,80,38,01,00,50,C3,00,00,05,80,38,01,00,DC,4A,01,00,DC,\
      4A,01,00,50,C3,00,00,06,00,77,01,00,00,77,01,00,90,5F,01,00,50,C3,00,00,07,\
      90,91,01,00,90,91,01,00,00,77,01,00,50,C3,00,00,01,18,00,00,00,00,00,00,00,\
      0B,E4,12,60,09,60,09,4B,00,0A,00,54,03,90,01,90,01,90,01,90,01,90,01,90,01,\
      90,01,00,00,00,00,00,02,04,31,07,DC,00,DC,00,DC,00,90,01,00,00,59,00,69,00,\
      4A,00,4A,00,5F,00,73,00,73,00,64,00,40,00,90,92,97,60,96,00,90,55,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,02,02,D4,30,00,00,02,10,60,EA,00,\
      00,02,10

    Interestingly my second, basically identical card won't make it for more than two minutes.
    Will have to play around a bit more to get a stable working config.

    Cheers

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    September 28, 2017, 07:29:05 AM
     #771
    Guess we need some tool (utility) for reg-modding or this thread will be flooded with regfiles ))

    And yes - putting random clock-values to P2-P5 states is not a good idea ))

  • Instant_exit
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    September 28, 2017, 07:32:56 AM
     #772
    If anyone has a working vega 56 softpowerplay config for monero they would be willing   to share, that would make me happy! Currently chugging along at 5900h/s with three 56+1 r1700 cpu at 670w at wall (ryzen around 500h/s). Vddc hovers around  1.025v with  stock registry -30 frequency -8pl pstate 7 min/max.

    Im thinking  I can probably get the same results with lower vddc core voltage, thus lower power consumtion and temps?

    A reg tool would be extremely helpful imo!

    Also, has  anyone tried setting 56 memory voltage to 1350mv, does it work  without  bios mod? Would be nice to be able to run mem at 1100mhz  as I can do with 64 bios, but without voiding the warranty  by swapping bios (though I think  in the eu you can basically change software in your electronics without voiding warranty by law, it seems)

    Im talking about changing 0xE42  (1250mv) to 0x546 (1350mv)

    Thanks!

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    September 28, 2017, 07:40:24 AM
     #773
    Quote from: Instant_exit on September 28, 2017, 07:32:56 AM
    Also, has  anyone tried setting 56 memory voltage to 1350mv, does it work  without  bios mod? Would be nice to be able to run mem at 1100mhz  as I can do with 64 bios, but without voiding the warranty  by swapping bios (though I think  in the eu you can basically change software in your electronics without voiding warranty by law, it seems)

    Im talking about changing 0xE42  (1250mv) to 0x546 (1350mv)
    Only bios flash currently ... And don't mess with air-Vega64 bios ... go for Liquid one ))

  • kemo6600
    Member
    **
    Offline Offline

    Activity: 130
    Merit: 10


    View Profile
    September 28, 2017, 08:48:09 AM
     #774
    Guys , how often does the XMR-STAK crash ,i am running single Vega 64 ,  i have both threads intensity  at 1600 , Temperature percentage and power target -20% , HBM@ stock , fan rpm 3000+ and still getting restart every 30-45 minutes .

    That translates into
    Core 1082
    Memory 945
    Temp 66C
    Fan 67%
    Hash-rate 1700

  • Instant_exit
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    September 28, 2017, 08:50:59 AM
     #775
    Quote from: rednoW on September 28, 2017, 07:40:24 AM
    Quote from: Instant_exit on September 28, 2017, 07:32:56 AM
    Also, has  anyone tried setting 56 memory voltage to 1350mv, does it work  without  bios mod? Would be nice to be able to run mem at 1100mhz  as I can do with 64 bios, but without voiding the warranty  by swapping bios (though I think  in the eu you can basically change software in your electronics without voiding warranty by law, it seems)

    Im talking about changing 0xE42  (1250mv) to 0x546 (1350mv)
    Only bios flash currently ... And don't mess with air-Vega64 bios ... go for Liquid one ))

    Why liquid one? What are the pros of using that instead of the air bios?
    /J

  • q37104
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    September 28, 2017, 09:03:33 AM
     #776
    I have ~1900 H/s stable on RX Vega 56 and SoftPowerPlayTable mod. Same values for core as with RX Vega 64 SoftMod and 950MHz on Mem. RX Vega 56 SoftPowerPlayTable as a base.

  • Django69
    Newbie
    *
    Offline Offline

    Activity: 74
    Merit: 0


    View Profile
    September 28, 2017, 09:04:23 AM
     #777
    Quote from: q37104 on September 28, 2017, 09:03:33 AM
    I have ~1900 H/s stable on RX Vega 56 and SoftPowerPlayTable mod. Same values for core as with RX Vega 64 SoftMod and 950MHz on Mem. RX Vega 56 SoftPowerPlayTable as a base.



    can you share your settings?

  • Instant_exit
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    September 28, 2017, 09:36:27 AM
     #778
    Quote from: q37104 on September 28, 2017, 09:03:33 AM
    I have ~1900 H/s stable on RX Vega 56 and SoftPowerPlayTable mod. Same values for core as with RX Vega 64 SoftMod and 950MHz on Mem. RX Vega 56 SoftPowerPlayTable as a base.



    Yes please, would be greatly appreciated!

  • q37104
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    September 28, 2017, 09:36:45 AM
    Last edit: September 28, 2017, 10:04:58 AM by q37104
     #779
    Quote from: Django69 on September 28, 2017, 09:04:23 AM
    Quote from: q37104 on September 28, 2017, 09:03:33 AM
    I have ~1900 H/s stable on RX Vega 56 and SoftPowerPlayTable mod. Same values for core as with RX Vega 64 SoftMod and 950MHz on Mem. RX Vega 56 SoftPowerPlayTable as a base.



    can you share your settings?

    This is for RX Vega 56.

    VCore = 950mV
    CoreClock = 1408MHz

    MemClock = 800MHz (change this in WattMan)

    Code:
    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0002]
    "PP_PhmSoftPowerPlayTable"=hex:A7,02,08,01,00,5C,00,EF,06,00,00,0E,2C,00,00,1B,\
      00,48,00,00,00,80,A9,03,00,F0,49,02,00,32,00,08,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,02,01,5C,00,40,02,37,02,94,00,8F,01,B4,00,1E,01,7A,00,8C,00,\
      AD,01,00,00,00,00,63,02,00,00,90,00,99,02,5E,01,34,01,88,01,68,36,02,00,71,\
      02,02,02,00,00,00,00,00,00,08,00,00,00,00,00,00,00,05,00,07,00,03,00,05,00,\
      00,00,00,00,00,00,01,08,20,03,84,03,B6,03,B6,03,B6,03,B6,03,B6,03,B6,03,01,\
      01,E2,04,01,01,84,03,00,06,60,EA,00,00,00,40,19,01,00,01,DC,4A,01,00,02,00,\
      77,01,00,03,90,91,01,00,05,6C,B0,01,00,07,01,08,D0,4C,01,00,00,00,80,00,00,\
      00,00,00,00,1C,83,01,00,01,00,00,00,00,00,00,00,00,70,A7,01,00,02,00,00,00,\
      00,00,00,00,00,88,BC,01,00,03,00,00,00,00,00,00,00,00,38,C1,01,00,04,00,00,\
      00,00,00,00,00,00,88,D5,01,00,05,00,00,00,00,01,00,00,00,70,D9,01,00,06,00,\
      00,00,00,01,00,00,00,00,26,02,00,07,00,00,00,00,01,00,00,00,00,04,60,EA,00,\
      00,00,40,19,01,00,00,DC,4A,01,00,00,90,5F,01,00,00,00,08,28,6E,00,00,00,2C,\
      C9,00,00,01,F8,0B,01,00,02,80,38,01,00,03,90,5F,01,00,04,F4,91,01,00,05,D0,\
      B0,01,00,06,C0,D4,01,00,07,00,08,6C,39,00,00,00,24,5E,00,00,01,FC,85,00,00,\
      02,AC,BC,00,00,03,34,D0,00,00,04,68,6E,01,00,05,08,97,01,00,06,EC,A3,01,00,\
      07,00,01,68,3C,01,00,00,01,04,3C,41,00,00,00,00,00,50,C3,00,00,00,00,00,70,\
      11,01,00,01,00,00,80,38,01,00,02,00,00,01,08,00,98,85,00,00,40,B5,00,00,60,\
      EA,00,00,50,C3,00,00,01,80,BB,00,00,60,EA,00,00,94,0B,01,00,50,C3,00,00,02,\
      78,FF,00,00,40,19,01,00,B4,27,01,00,50,C3,00,00,03,B4,27,01,00,DC,4A,01,00,\
      DC,4A,01,00,50,C3,00,00,04,80,38,01,00,90,5F,01,00,DC,4A,01,00,50,C3,00,00,\
      05,DC,4A,01,00,00,77,01,00,90,5F,01,00,50,C3,00,00,06,00,77,01,00,00,77,01,\
      00,90,5F,01,00,50,C3,00,00,07,00,77,01,00,90,91,01,00,00,77,01,00,50,C3,00,\
      00,01,18,00,00,00,00,00,00,00,0B,E4,12,60,09,60,09,4B,00,0A,00,54,03,90,01,\
      90,01,90,01,90,01,90,01,90,01,90,01,00,00,00,00,00,02,04,31,07,A5,00,A5,00,\
      A5,00,2C,01,00,00,59,00,69,00,4A,00,4A,00,5F,00,73,00,73,00,64,00,40,00,90,\
      92,97,60,96,00,90,55,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,02,\
      02,D4,30,00,00,02,10,60,EA,00,00,02,10

    EDIT: Changed the VCore to 950mV. 900mV did not run stable on 2 of my 3 Cards.

    Code:
    "gpu_threads_conf" : [
    { "index" : 0, "intensity" : 2016, "worksize" : 8, "affine_to_cpu" : false },
    { "index" : 0, "intensity" : 1600, "worksize" : 8, "affine_to_cpu" : false },
    ],

    Not optimized jet. Just took the values I found in this thread.

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    September 28, 2017, 09:52:20 AM
     #780
    Quote from: Instant_exit on September 28, 2017, 08:50:59 AM
    Quote from: rednoW on September 28, 2017, 07:40:24 AM
    Quote from: Instant_exit on September 28, 2017, 07:32:56 AM
    Also, has  anyone tried setting 56 memory voltage to 1350mv, does it work  without  bios mod? Would be nice to be able to run mem at 1100mhz  as I can do with 64 bios, but without voiding the warranty  by swapping bios (though I think  in the eu you can basically change software in your electronics without voiding warranty by law, it seems)

    Im talking about changing 0xE42  (1250mv) to 0x546 (1350mv)
    Only bios flash currently ... And don't mess with air-Vega64 bios ... go for Liquid one ))

    Why liquid one? What are the pros of using that instead of the air bios?
    /J
    Don't want to type a lot ... just take your time and try different settings for your cards. Nobody has to do this work for you.

    And yes ... this thread will be buried with this stupid big tables from newbies ... time to leave ...
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [39] 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 ... 158 »
      Print  
Page 38
Viewing Page: 39

IRLBTC™ © 2025 IRLBTC.com