Any scrypt based coin.

thanks.

edit : just want to ask, who is the trustworthy supplier of these, as i see many websites are selling these at their own prices. some at less some at high.

Hello Guys,

i have just started to get into the micro USB mining as a hobby i managed to buy 2 of these bad boys over this weekend.

i was hopeing someone could tell me how to set this up using Raspberry pie?

can anyone please guide me installing bfgminer 5.4 in linux? i have googled around and found posts from 2014 but no real guide to help get it up and running.

Kind Regards

Paul

Anyone get their Moonlander 2 miners to hash at 5Mhs plus?
What was the max hash speed you can obtain with settings?

Mem Voltage = ?
Core Voltage = ?
Frequency =?
Difficulty = ?
Hardware Errors % = ?


I have been getting just over 5Mhs with the following, 5v @10amp
supply and extra usb fan cooling pulling about 13.6 watts each total
68 watts on my Kill A Watt meter for 5 Moonlanders 2's.

Mem Voltage = approx 0.85v (trim pot R5)
Core Voltage = approx 0.82v (trim pot R9)
Frequency = 852 (in bat file)
Difficulty = 1024 (in bat file)
Hardware Errors <1%

there's a guide in header how to run these smooth on 10.13.2

This is the support thread below. Latest update has auto restart when miner freezes 

https://bt.irlbtc.com/view/2420357.0

I got my RPi 3 working with help from this

https://steemit.com/raspberry/@qctechno/howto-install-futurebit-moonlander-2-usb-scrypt-miner-with-raspberrypi-3

Any plans for Moonlander 3? I'd like to be in the first batch for a new one.

Apologies if this post is in the wrong thread.

First of all thanks jstefano for an excellent piece of engineering.

My question :  I am battling to get the mining going to ZPool.ca   .  All other pools I tried are working fine it's just on ZPool that I get the following output and no hashes submitted :

[2017-12-20 14:29:11] Started bfgminer 5.4.2-38-g106390a99
 [2017-12-20 14:29:20] Probing for an alive pool
 [2017-12-20 14:29:53] Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 alive
 [2017-12-20 14:29:54] Network difficulty changed to 4.25k (30.40Gh)
 [2017-12-20 14:29:54] Stratum from pool 0 detected new block
 [2017-12-20 14:29:56] Coinbase check: multiple inputs in coinbase: 0xaa
 [2017-12-20 14:29:56] Pool 0 misbehaving (coinbase check), disabling!
 [2017-12-20 14:29:56] Network difficulty changed to 799 ( 5.73Gh)
 [2017-12-20 14:29:56] Stratum from pool 0 detected new block
 [2017-12-20 14:29:59] Pool 0 no longer misbehaving, re-enabling!
 [2017-12-20 14:29:59] Network difficulty changed to 5.55k (39.70Gh)
 [2017-12-20 14:29:59] Stratum from pool 0 detected new block
 [2017-12-20 14:29:59] Pool 0 is sending mismatched block contents to us (0 is not 16-31)
 [2017-12-20 14:30:00] Network difficulty changed to 1.26k ( 9.06Gh)
 [2017-12-20 14:30:00] Stratum from pool 0 detected new block
 [2017-12-20 14:30:00] Pool 0 is sending mismatched block contents to us (0 is not 2-3)
 [2017-12-20 14:30:02] Pool 0 is sending mismatched block contents to us (0 is not 2-3)
 [2017-12-20 14:30:06] Network difficulty changed to 207 ( 1.48Gh)
 [2017-12-20 14:30:06] Stratum from pool 0 detected new block

Not sure if any of you have similar issues and a possible workaround with regards to command line settings that addresses the issue.

Tx