It's not in the pipe right now because I don't have a lot of time + we have too low scrypt hashrate.

------------------------------------------------------------

the FTC pool is ready for the neoscrypt switch !

how do i mine neoscrypt with my GTX 980
what do i put in the cudaminer settings!

You need to use the new Cgminer to mine NeoScrypt. Cudaminer hasnt got ported yet.

(NeoCgminer gives a good performance for NVIDIA cards.)

Quick question.. I've been in your IPC pool for a little bit now and my CPU miners started submitting around 75% - 90% bad shares. I have 2 different PCs in 2 locations I use (one office, one home) and they're both having some major issues. Im using NeoScrypt CPU miner v2.4.

Also running cgminer on an NVIDIA card, I can't seem to get any shares to accept. It's hashing at around 270k, but A:0, R:0 after running for around 10 mins. Is there something I need to add to my conf? If I put the algo in (--neoscrypt) it says GPU failure. If I leave the algo out, it hashes - but no shares.

EDIT: Solved the cgminer problem. But the bad shares thing is still pretty... um, bad...

It's happening in cgminer too. Rejected based on height apparently. That's the majority of shares submitted, so I don't know what's going on. I tried everything I could.

Sending FTC to BTC-E working? I send some and nothing arrived? Do i need to generate new address there?

I'm actually experiencing the opposite... GPU works ok. I mean, I was getting some bad shares - but it seemed much worse on the CPU. I tested on 3 completely unrelated machines in different locations and it just throw back tons of bad shares... (I'm just talking about the IPC pool. The FTC pool is fine.)

Btw, sleek, you might need to tweak a few settings to get it working optimally.

non of my blocks are being accepted.  over 150 blocks now.  I am a noob.  Am I doing something wrong?
Same result with a Win7-PC and RaspberryPI both using Minerd

Okay I just tried with a different pool.  blocks still not accepted

Am i loggin in wrong?

minerd.exe -o stratum+tcp://stratum.pxc.theblocksfactory.com:3332 -u username.worker -p password



If I use Phoenixcoin to mine with:

minerd -a neoscrypt -s 48 -o stratum+tcp://stratum.pxc.theblocksfactory.com:3332 -O username.worker:password -t 1 -r -1 -P

Same result

[2014-10-28 11:43:20] Stratum requested work restart
[2014-10-28 11:43:20] thread 0: 53498 hashes, 1.56 khash/s
[2014-10-28 11:42:30] > {"method": "mining.submit", "params": ["username.worker", "d21", "00000000", "544FB91C", "956B0100"], "id":4}
[2014-10-28 11:42:30] < {"error": [-2, "Share is above target", null], "id": 4, "result": null}
[2014-10-28 11:43:41] accepted: 0/3 (0.00%), 1.56 khash/s (booooo)

Sorry Noob question.
When i try to run cgminer 4.7.0

cgminer.exe -o stratum+tcp://stratum.pxc.theblocksfactory.com:3332 -u user.worker -p x

"No devices detected"
"waiting for usb hotplug device..." 
"Probing for an alive pool"
"Network diff set at 0"
"Stratum from pool 0 detected new block"
"
"
"

Do i need to specifiy what device in login command?
I am only running CPU and Nvidia card.  Trying to mine with CPU, since vid card was only purchased for video playback.

just updated PXC & IPC pool : you should have less rejected shares.