0.6-213@211231 🐧

What's new?

MINERS 👷‍♂️
⛏ lolMiner v1.39
* added support for mining TON/Toncoin, devfee is 1.5%, AMD cards since GCN1 via OpenCL and Nvidia cards since Maxwell and newer generation via CUDA are supported;
* added support for mining UBQ/Ubiq, devfee is 0.7% as with all Ethash based coins;
* added support for routing your stratum traffic through a socks5 proxy server, use --socks5 to enable it;
Fixes:
- added a timeout for DOH requests, so they can no longer hang indefinitely;
- fixed ethash support for RX 5500 series GPUs on more recent drivers
⛏ BzMiner v6.0
* added support olhash algorithm
⛏ CPUminer-Opt-JayDDee v3.19.2
* avx2 & avx512 improvements;
* bug fixes
🐞 Danila-Miner: minor stats fixe
🐞 TON-pool-miner: minor stats fixe
🐞 TeamRedMiner: stats fix
- fixed very rare error caused by consecutive unsuccessful attempts to initialize the GPU

---

0.6-213@220102 🐧

What's new?

MINERS 👷‍♂️
⛏ SRBMiner-Multi v0.8.8
* added socks5 proxy support --proxy parameter
* added algorithm argon2d_16000: ADOT - Alterdot coin for CPU/GPU mining, fee 0.85%
* performance increase on heavyhash algorithm for Vega GPU's up to ~13%
* performance increase on argon2id_chukwa2 algorithm for RDNA/RDNA2 GPU's up to ~12% & lower power consumption
* performance increase on argon2d_dynamic algorithm for RDNA/RDNA2 GPU's up to ~45% & lower power consumption
* removed devfee for yespoweric, yespowerlitb, yespowerres algorithms
* if using --multi-algorithm-job-mode 3 miner now auto sets --max-no-share-sent to 45 minutes if no other value was set
* rewrote restarting mechanism on Linux so it shouldn't spawn a new process anymore on miner auto restart
* minor bug fixes

0.6-213@220107 🐧
🇬🇧 What's new?

MINERS 👷‍♂️
⛏ lolMiner v1.41b
* re-wrote the complete HTTPS connection stack in the TON pool connector, so the connections can be reused for a significant lower load on the pools;
* improved performance of Nvidia TON kernels, especially significant on Turing based GPUs;
* added experimental TON kernels for Nvidia Fermi and first generation Kepler GPUs;
* altered fee pools of TON to distribute better to different mirrors to reduce load on single ones;
* implemented a system that can detect connection blocking in TON and will automatically choose alternative mirrors for the known TON pools in case of problems;
* users on toncoinpool.io stratum mode --ton-mode 3 can now specify a worker name via --worker or by adding a worker name to their wallet separated by a dot. Other TON mining pool protocols will ignore both, because most pools do not accept worker names send;
* several bugs fixed.
⚠️ NOTE
Please read message from lolMiner developer and a read complete changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.41

0.6-213@220114 🐧
🇬🇧 What's new?

MINERS 👷‍♂️
⛏ TeamBlackMiner v1.39
* improved stale checker/estimates AMD;
* fixed reject bug on ethproxy pools;
* fixed ETH+ZIL on LHR rigs
⛏ BzMiner v7.1.1
* new algo: alph for Alephium coin mining with 1% devfee;
* improved olhash hashrate;
* bugs fixes and improvements
⛏ CPUminer-Opt-JayDDee v3.19.4
* added new option stratum-keepalive which prevent disconnects when difficulty is too high;
* fixed verthash memory allocation for non-hugepages, broken in v3.19.3

0.6-213@220118 🐧

What's new?

MINERS 👷‍♂️
⛏ TeamBlackMiner v1.42
* fixed GPU timeouts on AMD rigs;
* fixed disconnect problem at nanopool.org and crazypool;
* fixed crash in --list-devices on OpenCL;
* flipped the GPU order for AMD GPUs;
* fixed an issue with BTC and Nano payouts on 2miners pool;
* added more pools
⛏ BzMiner v7.1.4
* support extra nonce from pool;
* fixed unsupported message from pool considered as rejected

Guys is it possible to mine this Alph coin into gate.io exchange address? Also awhat about the solo mining can I use the same exchange address? Someone should please reply

0.6-213@220121 🐧

What's new?

MINERS 👷‍♂️
⛏ GMiner v2.75
* major performance improvement for LHR GPUs on Ethash algorithm
* improved auto-tuning for LHR GPUs
* devfee increased from 0.65% to 1% on Ethash algorithm as on all major Ethash miners
⛏ TeamBlackMiner v1.43
* fixed fan speed percent and missing stats for some cards on AMD
* added 7 new CUDA kernels that can give a speedup on some cards
⛏ TeamRedMiner v0.9.1
* added --eth_ignore_abort_fail to disable intensity adjustment due to failed aborts
* added better handling of dead GPU logging in corner cases that previously didn't mention a specific GPU
* added further support for FPGA devices and voltage tuning support, see full miner's changelog
⛏ BzMiner v7.2.0
* fixed "Out of Memory" ethash/etchash bug on Nvidia cards with 8GB or less
* fixed unstable network issues causing BzMiner to crash or freeze
* fixed Alephium auto protocol detection
* now by default BzMiner uses protocol "stratum+tcp" if not specified
* LHR detection disabled for core only algos
* added no_work_timeout and test_iteration_ms to pool configs
* logs now rotate when BzMiner starts by default (set clear_log_file to true to overwrite log file on startup)
* added new column "%", showing percent of accepted shares
* fixed GPU sort order for pool table
* showing "--" for pool latency when no submitted share response has yet been received

🔴 LIVE stream on the Hiveon YouTube channel 🎬  
with Seth Estrada

🗓 January, 28th
04:00 PM UTC

The webinar will cover educational tips on the topics:
✔️How to connect your GPU rigs and ASIC miners to the dashboard
✔️Common Problems and Simple Solutions in Real-Time.

You can get the answers to these and other questions and issues during the Hiveon Educational Webinar.
Webinar link: https://youtu.be/sK-Q-P9g0ZY

0.6-213@220127 🐧
🇬🇧 What's new?

⛏ BzMiner v7.2.3
* improved CPU usage on ALPH;
* added ability to lock core and memory clocks on 30 series Nvidia GPUs;
* fixed network stability issues;
* improved Alephium hashrate on AMD GPUs;
* fixed Alephium dup shares when pool sends single job;
⛏ SRBMiner-Multi v0.8.9
* added algorithm randoml: LOZZ - Lozzax coin for CPU mining, fee 0.85%;
* improved performance on ghostrider, verushash, scryptn2 algorithms;
* now MSR tweaks allowed for every CPU mineable algorithm;
* reworked dataset creation for autolykos2 algorithm;
* removed support for algorithms: eaglesong, kadena, bl2bsha3, phi5, cryptonight_cache, cryptonight_heavyx;
* minor bug fixes
⛏ XMRig v6.16.3
* fixed READY threads X/X display after algorithm switching;
* GhostRider: updated docs; set correct priority for helper threads; added support for client.reconnect method; fixed for short responses from some Raptoreum pools;
* RandomX: don't restart mining threads when the seed changes;
* KawPow OpenCL: use separate UV loop for building programs.
⛏ XMRig-MO v6.16.3-mo1
* synced with XMRig v6.16.3
⛏ XMRigCC v3.0 as XMRig (new) fork
* full rebase of XMRig 6.16.3-dev;
* reintegrated Yadacoin RandomX variant rx/yada;
* dropped support for panthera for XLA/scala, cn/superfast, cn/cache_hash

Typically it’s not advised to mine directly to an exchange, but as long as the amount deposited is greater than the minimum required by the exchange for deposit and the address stays valid for deposit, it should work fine.

We’re aware of site accessibility issues and we’re working on it. Will be resolved shortly. Do note that this dashboard issue does not impact mining ops.