BSC, BTC yes or nano ! but pool PPS+ is not best for more profit

0.6-217@220428 💙💛

What's new?

MINERS 👷‍♂️
⛏ BzMiner v9.0.0
* added support mining IXI Ixian coin;
* many improvements & fixes for mining Kaspa;
* bug fixes
⛏ miniZ v1.8z
* improved performance and stability for ETH for LHR GPUs;
* improved performance on 125,4 for RTX 30xx;
* added AMD Polaris support for 125,4;
* added FIRO support;
* fixed issues with SERO and 192,7;
* minor bug fixes
⛏ T-Rex v0.25.13 TEST
* extend the new LHR unlock functionality to ETH+ALPH dual mining, and ERGO single mode;
* LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved now;
* Note: Beta version for testing purposes. You can select it manually in miner settings.

0.6-217@220504 💙💛

What's new?

MINERS 👷‍♂️
⛏ TeamBlackMiner v1.63
* added support for SSL mining/anonymous mining;
* reduced GPU memory requirements in copy DAG mode to extend the life of low memory cards;
* new fix for GPU timeout on AMD cards with high intensity;
* some short options changed names

0.6-217@220508 💙💛

What's new?

MINERS 👷‍♂️
⛏ NBMiner v41.0
* Introduced 100% LHR unlocker for ethash
Tested and verified on drivers v510.60. If you run into issues change driver to 510 series using nvidia-driver-update command, set your memclock 100-200 MHz lower that previous LHR partial unlock
⛏ lolMiner v1.49
* Improved performance of Nvidia LHR V2 cards in Ethash to 79 - 79.5% (86.5 - 87 % on RTX 3060 V1 and 460.39 driver). Note that dual mode codes remain unchanged.
* Added an experimental zombie mode for Nvidia Pascal generation 5GB cards, allowing them to continue mining Ethash after epoch 492 (in Linux)
* Reduced fee for LHR unlocker back to 0.7%. Now all Ethash solo codes have only 0.7% fee (again).
* LHR cards that have memory junction temperature sensors will automatically throttle LHR unlock by ~0.4 - 0.5% when hitting 106° C memory clock to prevent unneeded locks
* LHR calibration on startup now taking approx 2 minutes instead of 4.
* Extended CRC table for Ethash up until epoch 550
* Changed default behavior for "." signs in wallet address when Ton or Aleph dual mining. These will now automatically separate the string at the given position, so the thing after a . is treated as worker name.
⛏ TeamRedMiner v0.9.4.6 Public Beta Test
* Introduced R-mode: applicable for Vegas/VIIs/Navi10/Big Navi, see separate miner documentation
* Smooth power transitions for ethash family algos
To test the new R-mode you need the latest Stable Image with OpenCL 21.40+, select the miner version manually in miner settings and  follow the official manual or use the following command:

0.6-217@220510-2 💙💛

What's new?

MINERS 👷‍♂️
⛏ miniZ v1.8z2
* added support for 144,5 and ethash for AMD Polaris and gfx1071 RX 6700 XT;
* fixed issues with AMD support 125,4 (Flux)
⛏ TeamRedMiner v0.9.4.7 BETA
* fixed issues with hashrate drop on Navi GPUs in R-mode
Notes:
* Beta version for testing purposes you should select version manually in miner settings
⛏ NBMiner v41.4 TEST
* experemental ethash LHR unlocker ONLY for RTX 3080 12G and RTX 3050, expected hashrate: 3080 12G - 100MH/s, 3050 - 27MH/s;
Notes:
* 510 series driver required to work correctly - tested on v510.60.02 and v510.68.02 drivers
* Beta version for testing purposes you should select version manually in miner settings

0.6-217@220512 💙💛

What's new?

MINERS 👷‍♂️
⛏ NBMiner v41.5
* added ethash 90% LHR unlocker for 3080 12G & 3050;
* added ergo LHR unlocker support;
* improved ethash LHR unlocker stability
⛏ GMiner v2.93
* fixed performance degradation on FHR cards, appeared in v2.92

📝 Notes:
* latest miner releases for Nvidia LHR unlocker require Nvidia driver 510 series

0.6-217@220515 💙💛

What's new?

MINERS 👷‍♂️
⛏ lolMiner v1.50 RELEASE
* 100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs
* Added experimental LHR v3 unlock to ~90% (3050) and ~92% on 3080 12G, enable by default, use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock
* If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established
* Fixed a bug in v1.49 causing Ergo mining not to start on Nvidia GPUs
⛏ BzMiner v9.1.3
* Much more stable 100% LHR Unlock v1, supported on drivers 465+
* LHR Unlock stability adjuster with option --lhr_stability, lower value is more stable

0.6-217@220518 💙💛

What's new?

MINERS 👷‍♂️
⛏ GMiner v2.96
* LHR unlock for older drivers: fixed "LHR unlock failed" error on old drivers.
⛏ TeamRedMiner v0.10.0
* Introduced R-mode: applicable for Vegas/VIIs/Navi10/Big Navi.
see separate miner documentation for details
* Smooth power transitions for ethash family algos.
* Added argument --gpu_sdma=on|off for special situations, e.g. BC-250 needs --gpu_sdma=off.
⛏ T-Rex v0.26.3 BETA
* Improved LHR unlocker stability.
📝 Notes:
* This is a beta version, to test it you need to manually select this version in miner settings.

Why do I have to login to my HIVEON portal every day now on my web browser instead of every 30 days? It's annoying after the huge downtime a few days ago and this change was made.