hello guys,
I have a problem with my rig ,i have tryed to install hive to a hdd drive but its not booting up .
i have 2 hdd drives 1 with win 10 and 1 with hive,win 10 is booting up just fine no problems but when i boot up hive(hdd win 10 disconect) it starts up the bios.
it has also has made 2 partitions on the drive 1 for the config file(email adres) and the other? hive???

i hope you guys understand me, english is not my native langauge and is a little bit rusty

how did you create hiveos hdd? i guess your disk image corrupted. i tried "hdd raw copy tool" before with smooth. and you are right its 2 partition 1 partition is around 8mb for vpn and certificate files other is linux image. it can not accessible from windows caused by ext file system formatted.

Enable CSM in your BIOS. I had the same problem.

If you can let me know which watchdog you got and how it works for you that would be great as I haven't had much feedback on that.

I was a bit reluctant to use the flash function but it is much much better than using windows and ATIflash (much more stable & faster) my only suggestion is not to push it ie after you flash give it a good minute or two before refreshing and making adjustments but other than that its very easy.

yes, it does

You can easily check it yourself. Just set Red Temp to low level that is easily reached by you rig, find out and report to coomunity.
As of Telegram you can explicitly setup what notifications are sent. It is done from https://hiveos.farm/a/account/#pane-notifications

I assume you are flashing the usb from windows.  It will make 2 partitions on the drive - one is a very small partition readable by windows which lets you configure the rig before booting the stick (optional), the other is a larger linux-formatted partition that windows can't read (thus the message about formatting the usb).  this is expected and can be ignored, the rig should boot from it fine

That is correct sir.
I can see the 20mb disk, and another 7 gb partition.

But nothing happends when i try to boot with it. it goes straigt to windows. I have tried the tip from hive os site for troubleshooting.

1.i dowload the file
2.i unpack it with winrar, or 7zip
3. i use hdd raw copy tool , or win32diskimigar
4. i chooose the file
5. i choose the target

right after it is finished it tells me that i need to format the usb.
dont do that.

i restart the computer, check that bios is set to boot on usb.  goes to windows.
i restart the computer, go to bios and try to force start from usb , nothing happends.

i have downloaded both the torrent, and the normal one, and i cant see what i am doing wrong.

my next move will be to go to the store and buy a new usb stick.

i have tried to mount the img file with windows, just to see. and then i get a error that det file i damaged. but i have dowloaded several, and they all cant be damaged ?

Good idea, tried it, liked it. But sometimes, for some reason, the cards fall off, and we do not understand why.
Well, the main disadvantage is the payment.
If you have one or two rigs, then everything is OK, you can use it, and if 6-10 rigs, it's already expensive.
For on the same windows and allminer we have the same thing, only for free;)

Yepp. It is much more convinient to steal then to earn something, didn't it?
Just remember what you are really doing and thus compare $100 windows license with $3 Hive, not a stolen Windows for free with a product that no one force you to use.