<<  >> (p.46)
    Author Topic: Hiveon. №1 OS for mining  (Read 81388 times)

    • afrik
    Newbie
    *
    Offline

    Activity: 11
    Merit: 0


    View Profile
    May 23, 2018, 11:20:44 AM
     #901
    Looking for HiveOS compatible Motherboard (and CPU combo)

    Hi All,
    Been using HiveOS for over 1/2 year now - great, loving it.

    I have 10 cards running on:
    - unsupported, Dual CPU server MB (using windows as HiveOS/Ubuntu is not supported and does not work - shame, good hardware)
    - 2 very old mini PCs (2 PCI ports only per PC, tried to use splitters - issues with reliability)

     I need new to purchase a new supported MB or two (so I can balance the cards between the two for the purpose of balancing the power supplies)

    Any ideas for economical MB MBs ?

    Thanks

  • ctlst
    Newbie
    *
    Offline

    Activity: 3
    Merit: 0


    View Profile
    May 23, 2018, 10:19:00 PM
     #902
    Quote from: nightfury626 on May 19, 2018, 04:03:24 AM
    can i get some help with configuration for mining cryptonight-heavy algo coins? please. a screenshot or text outline will do.

    in xmr stak add this command to config override :     "currency":"haven" or "currency":"sumokoin" . 

    under wallet onl yinput you wallet address and your rig id goes in the "pass" section

  • joelitoup
    Member
    **
    Offline

    Activity: 227
    Merit: 10


    View Profile
    May 24, 2018, 04:20:58 PM
     #903


    Any can helpme? My d3 under firmware mod Blissz 1.12 and stuck in this error.

  • dimafern (OP)
    Member
    **
    Offline

    Activity: 577
    Merit: 27


    View Profile WWW
    May 24, 2018, 08:42:12 PM
     #904
    0.5-53
    - Accepted Rejected shares stats for most of the miners
    - Added selection xmr-stak forks FireiceUK or IndeedMiners
    - Removed obsolete xmr-stak-cpu
    - Reworked NTFS config partition mounting
    - Improved online detection at boot

  • joelitoup
    Member
    **
    Offline

    Activity: 227
    Merit: 10


    View Profile
    May 24, 2018, 09:23:59 PM
     #905
    HOW TO UPDATE HIVE OS?

  • dimafern (OP)
    Member
    **
    Offline

    Activity: 577
    Merit: 27


    View Profile WWW
    May 24, 2018, 09:25:01 PM
     #906
    Quote from: joelitoup on May 24, 2018, 09:23:59 PM
    HOW TO UPDATE HIVE OS?

    Find orange "Upgrade" arrow icon near the version on your rig page.

  • joelitoup
    Member
    **
    Offline

    Activity: 227
    Merit: 10


    View Profile
    May 24, 2018, 10:07:58 PM
     #907
    Quote from: dimafern on May 24, 2018, 09:25:01 PM
    Quote from: joelitoup on May 24, 2018, 09:23:59 PM
    HOW TO UPDATE HIVE OS?

    Find orange "Upgrade" arrow icon near the version on your rig page.

    You can helpme with my D3 problem to install HIVEOS?

  • alforro
    Copper Member
    Newbie
    *
    Offline

    Activity: 124
    Merit: 0

    I buy/sell crypto worldwide


    View Profile WWW
    May 25, 2018, 03:40:20 AM
     #908
    Quote from: joelitoup on May 24, 2018, 10:07:58 PM
    Quote from: dimafern on May 24, 2018, 09:25:01 PM
    Quote from: joelitoup on May 24, 2018, 09:23:59 PM
    HOW TO UPDATE HIVE OS?

    Find orange "Upgrade" arrow icon near the version on your rig page.

    You can helpme with my D3 problem to install HIVEOS?

    The issue with your D3 is that you get this:

    Code:
    $ASIC_MODEL == "Antminer D3 Blissz v1.12"

    The bash script only recognize the Blissz firmware without the version. You can try with this workaround, I have edited that line on the script and upload it to github. Try with:

    Code:
    cdtmp && curl -L --insecure -s -O https://gist.githubusercontent.com/alforro/c168d856b18c606311db90053a09e65d/raw/b6563626e60f5e4d70f5c448c18c8d660c05ef7f/selfupgrade && sh selfupgrade

    I only changed one line:

    Code:
    elif [ "$ASIC_MODEL" == "Antminer D3 Blissz v1.12" ]; then


    Let me know if this works  Grin

  • ensnameseller
    Newbie
    *
    Offline

    Activity: 5
    Merit: 0


    View Profile
    May 25, 2018, 03:59:04 AM
    Last edit: May 25, 2018, 04:10:22 AM by ensnameseller
     #909
    https://i.imgur.com/Mol7TpD.png
    Can some one help me with this issues of "gpu 0" jumping hashrates all over the place. Its an older R9 290x . Any thoughts?

  • alforro
    Copper Member
    Newbie
    *
    Offline

    Activity: 124
    Merit: 0

    I buy/sell crypto worldwide


    View Profile WWW
    May 25, 2018, 10:06:06 PM
     #910
    Quote from: joelitoup on May 24, 2018, 04:20:58 PM


    Any can helpme? My d3 under firmware mod Blissz 1.12 and stuck in this error.

    We fix this error by editing the fileusr/bin/compile_time using vi.

    Code:
    viusr/bin/compile_time

    Edit the second line from Antminer D3 Blissz v1.12 to Antminer D3 Blissz

    close vi typing :q and Enter

    then you should do this:

    Code:
    rm -rfhive
    rm -rfhive-config
    reboot
    ln -susr/lib/libcurl-gnutls.so.4usr/lib/libcurl.so.5
    cdtmp && curl -L --insecure -s -O https://raw.githubusercontent.com/minershive/hiveos-asic/master/hive/bin/selfupgrade && sh selfupgrade

    I hope this help someone else too.

  • blackenedvoodoo
    Newbie
    *
    Offline

    Activity: 47
    Merit: 0


    View Profile
    May 26, 2018, 10:32:10 AM
     #911
    Quote from: ensnameseller on May 25, 2018, 03:59:04 AM
    https://i.imgur.com/Mol7TpD.png
    Can some one help me with this issues of "gpu 0" jumping hashrates all over the place. Its an older R9 290x . Any thoughts?

    buy a new card

  • tifoz_a
    Newbie
    *
    Offline

    Activity: 12
    Merit: 0


    View Profile
    May 26, 2018, 12:53:45 PM
     #912
    Failed to read claymore stats from localhost:3333


    Please help I have this error in agent screen, farm is not working, what can I do?

    Any solution?

  • kurniawanj
    Newbie
    *
    Offline

    Activity: 141
    Merit: 0


    View Profile
    May 27, 2018, 03:57:28 AM
     #913
    hey just a noob question

    how bout if we use 2.0 usb flashdisk with 2.0 usb port
    like toshiba hayabusha fdisk which write/read speed about 6mb/s

  • alforro
    Copper Member
    Newbie
    *
    Offline

    Activity: 124
    Merit: 0

    I buy/sell crypto worldwide


    View Profile WWW
    May 27, 2018, 06:43:01 PM
     #914
    A friend of mine got hacked, his asics were put to mine to nicehash a few days after he installed hiveos. Someone had a similar issue?  Huh Huh Huh I dont think that hiveos was the cause, probable another malware on his local network as him didnt changed the default password of the asics.

  • superminator
    Newbie
    *
    Offline

    Activity: 82
    Merit: 0


    View Profile
    May 27, 2018, 09:08:13 PM
     #915
    Quote from: dadashali on December 18, 2017, 10:06:46 AM
    Quote from: dadashali on December 16, 2017, 07:03:56 PM
    There is still some matters yet.
    1. For the first time (first run), if i get a rig id and enter it the setup would be completed successfully but if i delete that rig id in the website and make another one and then use "firstrun -f" command to setup a fresh rig once again, it would not be successful while info on "rig.conf" file will be changed to new info that i entered from fresh setup and the rig will stay to works with old rig id that was deleted before!

    2. While i made setup miner software and wallet via video tutorial to mine XMR via nanopool server with claymore dual (i've RX 470), i don't know why the miner start to mine only for Ethereum while i didn't define any eth address at all!! In the Hiveos XMR mining not possible with claymore? I must mention that i'll click on the "rocket" after choosing the miner and wallet but after restart mining it will mine ethereum again ... i'm very confused  Undecided

    3. For failing on memory overclock there is an error like below:
    Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
    Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
    Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
    Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

    I see Hiveos does not show this error on it website or miner console (via ssh or shellinabox) and it will shown on the connected monitor to the rig only! please explain about this matter or fix it on the Hiveos error report.

    Regards

    It would be great if you can resolve this matter for me. @dimafern

    Hi!,

    Have you solved this error? I also have it and I do not know how to solve it:

    Best regards.

  • HaloGenius
    Jr. Member
    *
    Offline

    Activity: 252
    Merit: 4


    View Profile WWW
    May 27, 2018, 11:01:43 PM
     #916
    Quote from: superminator on May 27, 2018, 09:08:13 PM
    Quote from: dadashali on December 18, 2017, 10:06:46 AM
    Quote from: dadashali on December 16, 2017, 07:03:56 PM
    There is still some matters yet.
    1. For the first time (first run), if i get a rig id and enter it the setup would be completed successfully but if i delete that rig id in the website and make another one and then use "firstrun -f" command to setup a fresh rig once again, it would not be successful while info on "rig.conf" file will be changed to new info that i entered from fresh setup and the rig will stay to works with old rig id that was deleted before!

    2. While i made setup miner software and wallet via video tutorial to mine XMR via nanopool server with claymore dual (i've RX 470), i don't know why the miner start to mine only for Ethereum while i didn't define any eth address at all!! In the Hiveos XMR mining not possible with claymore? I must mention that i'll click on the "rocket" after choosing the miner and wallet but after restart mining it will mine ethereum again ... i'm very confused  Undecided

    3. For failing on memory overclock there is an error like below:
    Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
    Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
    Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
    Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

    I see Hiveos does not show this error on it website or miner console (via ssh or shellinabox) and it will shown on the connected monitor to the rig only! please explain about this matter or fix it on the Hiveos error report.

    Regards

    It would be great if you can resolve this matter for me. @dimafern

    Hi!,

    Have you solved this error? I also have it and I do not know how to solve it:

    Best regards.
    It's simplest error. Memory too overclocked or has wrong timings
    Hive OS - mining platform #1. Register with promo code MINING4ALL and get 10$ to your balance

  • superminator
    Newbie
    *
    Offline

    Activity: 82
    Merit: 0


    View Profile
    May 28, 2018, 12:04:02 PM
     #917
    Quote from: HaloGenius on May 27, 2018, 11:01:43 PM
    Quote from: superminator on May 27, 2018, 09:08:13 PM
    Quote from: dadashali on December 18, 2017, 10:06:46 AM
    Quote from: dadashali on December 16, 2017, 07:03:56 PM
    There is still some matters yet.
    1. For the first time (first run), if i get a rig id and enter it the setup would be completed successfully but if i delete that rig id in the website and make another one and then use "firstrun -f" command to setup a fresh rig once again, it would not be successful while info on "rig.conf" file will be changed to new info that i entered from fresh setup and the rig will stay to works with old rig id that was deleted before!

    2. While i made setup miner software and wallet via video tutorial to mine XMR via nanopool server with claymore dual (i've RX 470), i don't know why the miner start to mine only for Ethereum while i didn't define any eth address at all!! In the Hiveos XMR mining not possible with claymore? I must mention that i'll click on the "rocket" after choosing the miner and wallet but after restart mining it will mine ethereum again ... i'm very confused  Undecided

    3. For failing on memory overclock there is an error like below:
    Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
    Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
    Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
    Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

    I see Hiveos does not show this error on it website or miner console (via ssh or shellinabox) and it will shown on the connected monitor to the rig only! please explain about this matter or fix it on the Hiveos error report.

    Regards

    It would be great if you can resolve this matter for me. @dimafern

    Hi!,

    Have you solved this error? I also have it and I do not know how to solve it:

    Best regards.
    It's simplest error. Memory too overclocked or has wrong timings

    I don’t overclocked memory. The default value is set.

  • HaloGenius
    Jr. Member
    *
    Offline

    Activity: 252
    Merit: 4


    View Profile WWW
    May 28, 2018, 05:49:33 PM
     #918
    Quote from: superminator on May 28, 2018, 12:04:02 PM
    I don’t overclocked memory. The default value is set.
    To be honest, I do not believe you ...

    This error in 99% cases = bad memory timings, overclocked memory ... or broken video ram chips
    Hive OS - mining platform #1. Register with promo code MINING4ALL and get 10$ to your balance

  • superminator
    Newbie
    *
    Offline

    Activity: 82
    Merit: 0


    View Profile
    May 28, 2018, 05:55:36 PM
     #919
    Quote from: HaloGenius on May 28, 2018, 05:49:33 PM
    Quote from: superminator on May 28, 2018, 12:04:02 PM
    I don’t overclocked memory. The default value is set.
    To be honest, I do not believe you ...

    This error in 99% cases = bad memory timings, overclocked memory ... or broken video ram chips

    :-), Consciously, I assure you that no.

    I can give you more data, the problem is happening to me with Arch Linux with kernel 4.16 and mesa 18.04.

    But it works properly in Ubuntu 16.04 with kernel 4.13 and mesa 17.3.

    So, I do not know if the problem can be something derived from the kernel, mesa and xorg.

  • HaloGenius
    Jr. Member
    *
    Offline

    Activity: 252
    Merit: 4


    View Profile WWW
    June 01, 2018, 12:14:08 AM
     #920
    v0.5-54
    - IMPORTANT! New AMD undervolting technique, more reliable core voltage states now. Though it's slower to apply.
    - Invalid shares reported by Claymore for each GPU

    Additional notice:
    In version 0.5-54, a new mechanism is used to reduce power consumption. Along with this GPU core voltage,which previously set, may need to be adjusted.
    Hive OS - mining platform #1. Register with promo code MINING4ALL and get 10$ to your balance
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [46] 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 ... 115 »
      Print  
Page 45
Viewing Page: 46

IRLBTC™ © 2026 IRLBTC.com