Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.660)

	Author	Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1 (Read 5806553 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic. (3 posts by 1+ user deleted.)

-ck (OP)

Legendary

Offline

Activity: 4578
Merit: 1695

Ruu \o/

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 10:25:14 AM

#13181

Quote from: pooler on November 04, 2013, 10:12:10 AM

Quote from: ckolivas on November 04, 2013, 09:56:38 AM

Quote from: pooler on November 04, 2013, 09:54:43 AM

Did you commit the fix? I cannot find it in the commit history.
I have tried the latest master (tag v3.7.0) from the git repo, and the bug is still there.

Well, no one confirmed whether I had fixed it or not, so I had to run blind. Therefore the bug is still there.

Sorry for the misunderstanding. When I posted my report, it was referred to the latest git master (that's why I suggested users to revert to v3.6.6 instead of just pulling the latest commits). Since no related commit appeared after my post, I thought you were working on a fix and you still had to push it to the git repo. My bad, I should probably have been more explicit.

In that case I suggest scrypt miners stick to 3.6.6 (not 3.6.6-1 or later).

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck

nitrox

Member

Offline

Activity: 136
Merit: 10

tester

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 10:50:42 AM

#13182

cgminer will officially supports HEH16A form technobit.eu ?

https://cex.io/r/0/ejko/0/

kano

Legendary

Offline

Activity: 4732
Merit: 1905

Linux since 1997 RedHat 4

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 11:31:59 AM

#13183

Quote from: nitrox on November 04, 2013, 10:50:42 AM

cgminer will officially supports HEH16A form technobit.eu ?

Looking at their web site they have a collection of all sorts of low hashing devices and one 40GH/s device.
The 40GH/s device has it's own miner in it so obviously that one isn't relevant.
The others, no idea coz we haven't seen any of them and no one has sent them to us.

Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee Bitcointalk thread: Forum
Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer

jmc1517

Newbie

Offline

Activity: 56
Merit: 0

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 11:41:15 AM

#13184

Quote from: ckolivas on November 04, 2013, 05:56:06 AM

Quote from: ckolivas on November 04, 2013, 01:33:14 AM

Next step after LOL has to be:

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rofl.exe

Skip that and go straight to

http://ck.kolivas.org/apps/cgminer/temp/cgminer-lmfao.exe

I'm getting itchy here with too much accumulated for a new release, so consider lmfao as the release candidate.

EDIT: Never mind, v3.7.0 is out which is basically the same as lmfao. Just try that one.

Thank you for the generous comments in the changelog *blush*

Ran 3.5.1 overnight, no problems. Skipped "lol", "lmfao" etc as suggested and started 3.7.0 this morning, without logging.
Unfortunately got a zombie after no more than a minute. Re-plugged it and went off for breakfast. Came back to find a new zombie.

I've now made a clean start with 3.7.0 with logging. Broadband has been up and down, which it has coped with, so I'll just let it run and see what happens. I assume it's of no benefit to go back and test "lol" etc.?

-ck (OP)

Legendary

Offline

Activity: 4578
Merit: 1695

Ruu \o/

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 11:43:41 AM

#13185

Quote from: jmc1517 on November 04, 2013, 11:41:15 AM

Quote from: ckolivas on November 04, 2013, 05:56:06 AM

Quote from: ckolivas on November 04, 2013, 01:33:14 AM

Next step after LOL has to be:

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rofl.exe

No point testing any of those earlier ones. Yours looks more resistant to being fixed than aigeezer's too. You have lots of problems... and I have nothing new for you to test at this time.

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck

Illutian

Full Member

Offline

Activity: 128
Merit: 100

...The Shadow knows.

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 01:35:55 PM

#13186

Is there anyway to change the layout.

Currently my 18 erupters show up like this:
(Marked and pasted from the command prompt; no formatting changes made, except for adding a '.' in the brackets to avoid a forum post formatting issue)

Quote

But all 18 are crunching away:

Quote

(5s):5.942G (avg):5.883Gh/s | A:252 R:0 HW:4 WU:76.0/m

-Redacted-

Hero Member

Offline

Activity: 574
Merit: 501

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 02:15:49 PM

#13187

Try the up and down arrows...

Illutian

Full Member

Offline

Activity: 128
Merit: 100

...The Shadow knows.

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 03:13:58 PM

#13188

Quote from: -Redacted- on November 04, 2013, 02:15:49 PM

Try the up and down arrows...

That does nothing. Doesn't even most the blinking prompt line.

I should also mention that because of the formatting I can't see any of the 'Settings', 'Pool Management', or 'Display options' messages.

jmc1517

Newbie

Offline

Activity: 56
Merit: 0

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 03:36:37 PM
Last edit: November 04, 2013, 05:01:06 PM by jmc1517

#13189

Quote from: ckolivas on November 04, 2013, 11:43:41 AM

No point testing any of those earlier ones. Yours looks more resistant to being fixed than aigeezer's too. You have lots of problems... and I have nothing new for you to test at this time.

Well I could suggest going back to the code in 3.5.1 - which seems to work flawlessly for me - but I'm not good at dodging flying objects...!!! Seriously, I do appreciate all the time and effort you've been putting into this, and if a solution is not forthcoming, then I can happily stay with 3.5.1 or even 3.3.1 for my particular setup.

Last run of 3.7.0 produced one zombie after 2 hours. I came back after 4 hours, so just the one. Logfile here if required:
https://dl.dropboxusercontent.com/u/44240170/logfile-3.7.0.txt

Edited to correct formatting.

dlasher

Sr. Member

Offline

Activity: 467
Merit: 250

Re: Pool 'stall' issue in 3.6.6

November 04, 2013, 04:22:48 PM

#13190

[snip comments about 'waiting for pool issue']

Quote from: ckolivas on November 03, 2013, 09:17:58 PM

On further investigation, I've found how this can happen, and have committed a fix for this into git so it should go into the next version. The actual issue goes back quite a way so backtracking versions will not avoid it.

Thanks, heard more comments about people running into it over the weekend from KNC users, who, of course in 0.98 firmware, went to cgminer 3.6.6.

by the way, is this the fix:

Quote

- Use a non blocking connect with a 1 second select timeout when initiating
stratum to allow us to iterate over all IPs returned by getaddrinfo in round
robin DNS pools.

I know I haven't said it for at least 1-2 versions, but thank you again for your continued commitment to CGMINER. It only seems to get better and better over time.

It's a pity you didn't write a secret "send 0.1% to the author" into cgminer.. you'd be filthy rich by now from all of us mining with it. In all seriousness, perhaps you should put in a command-line switch.. don't make it default, but make it explicit, like --donate-author %

-Redacted-

Hero Member

Offline

Activity: 574
Merit: 501

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 04:27:56 PM

#13191

Checkbox to do that, yes. I'd check that.
Secretly do that - once discovered, that would be the end of cgminer.

ksenter

Member

Offline

Activity: 90
Merit: 10

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 04:34:23 PM

#13192

Could something that changed in 3.7.0 have broken mining on p2pool? I just tried upgrading and it just closed immediately after I ran it.

Edit: forgot to add log..

[2013-11-04 11:29:34] Started cgminer 3.7.0
[2013-11-04 11:29:36] Probing for an alive pool
[2013-11-04 11:29:36] Switching pool 0 http://127.0.0.1:9332 to stratum+tcp://127.0.0.1:9332
[2013-11-04 11:29:36] Pool 0 difficulty changed to 7.328747
[2013-11-04 11:29:36] Network diff set to 391M
[2013-11-04 11:29:36] Stratum from pool 0 requested work restart

Then it closed...

Askit2

Hero Member

Offline

Activity: 981
Merit: 500

DIV - Your "Virtual Life" Secured and Decentralize

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 05:37:33 PM

#13193

Started 3.7.0 when it was released. I hadn't turned logging on so this won't likely be of much help. Plus it was already reported. Still here is what I came back to.

Code:

cgminer version 3.7.0 - Started: [2013-11-04 05:15:39]
--------------------------------------------------------------------------------
(5s):0.000 (avg):7.981Gh/s | A:32182 R:32 HW:276 WU:111.6/m
ST: 0 SS: 0 NB: 4 LW: 33213 GF: 0 RF: 0
Connected to multiple pools with block change notify
Block: 7ac0fe1f... Diff:391M Started: [05:42:01] Best share: 36.2K
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
BAJ 0: max 32C 3.43V | 4.862G/439.6Mh/s | A:1880 R:0 HW: 0 WU: 6.2/m
BAJ 1: max 32C 3.73V | 5.329G/466.7Mh/s | A:1990 R:0 HW: 0 WU: 6.4/m
BAJ 2: max 31C 3.65V | 5.354G/474.4Mh/s | A:1465 R:0 HW: 0 WU: 6.8/m
BAJ 3: max 33C 3.32V | 4.867G/433.3Mh/s | A:1922 R:0 HW: 7 WU: 6.0/m
BAJ 4: max 30C 4.04V | 5.874G/523.7Mh/s | A:2130 R:0 HW: 0 WU: 7.2/m
BAJ 5: max 30C 3.15V | 4.980G/435.7Mh/s | A:1753 R:0 HW: 52 WU: 5.7/m
BAJ 6: max 32C 3.33V | 5.078G/448.7Mh/s | A:1756 R:0 HW: 1 WU: 6.5/m
BAJ 7: max 31C 3.46V | 5.665G/501.1Mh/s | A:2073 R:0 HW: 0 WU: 7.1/m
BAJ 8: max 29C 3.86V | 5.552G/487.4Mh/s | A:1921 R:0 HW: 0 WU: 6.9/m
BAJ 9: max 31C 2.28V | 5.619G/502.1Mh/s | A:2042 R:0 HW: 0 WU: 6.8/m
BAJ 10: max 31C 3.73V | 5.661G/481.6Mh/s | A:2094 R:0 HW: 0 WU: 7.0/m
BAJ 11: max 26C 3.51V | 4.810G/426.9Mh/s | A:1601 R:0 HW: 40 WU: 5.9/m
BAJ 12: max 29C 3.52V | 5.086G/453.8Mh/s | A:1759 R:0 HW: 0 WU: 6.5/m
BAJ 13: max 30C 3.96V | 5.118G/455.7Mh/s | A:1984 R:0 HW: 0 WU: 6.4/m
BAJ 14: max 29C 2.99V | 5.246G/462.7Mh/s | A:2211 R:0 HW: 0 WU: 6.6/m
BAJ 15: max 30C 3.83V | 5.579G/497.3Mh/s | A:1949 R:0 HW:111 WU: 6.8/m
BAJ 16: max 29C 3.71V | 5.448G/490.8Mh/s | A:1653 R:0 HW: 65 WU: 6.7/m
--------------------------------------------------------------------------------

[2013-11-04 05:41:10] Accepted 03a19249 Diff 71/37 BAJ 3 pool 2
[2013-11-04 05:41:17] Accepted 038254a8 Diff 73/37 BAJ 13 pool 2
[2013-11-04 05:41:21] Accepted 063654e9 Diff 41/32 BAJ 5 pool 3
[2013-11-04 05:41:21] Accepted 01895d09 Diff 167/32 BAJ 12 pool 3
[2013-11-04 05:41:23] Accepted ca03713b Diff 324/37 BAJ 12 pool 2
[2013-11-04 05:41:25] Accepted 062fe1a4 Diff 41/32 BAJ 7 pool 3
[2013-11-04 05:41:28] Accepted 0424011a Diff 62/37 BAJ 12 pool 2
[2013-11-04 05:41:29] Accepted 06de4660 Diff 37/32 BAJ 4 pool 3
[2013-11-04 05:41:30] Accepted 01a3620a Diff 156/32 BAJ 9 pool 3
[2013-11-04 05:41:30] Accepted 05815bc9 Diff 46/37 BAJ 5 pool 2
[2013-11-04 05:41:33] Accepted 03489a3f Diff 78/37 BAJ 3 pool 2
[2013-11-04 05:41:35] Accepted 0473473c Diff 58/37 BAJ 7 pool 2
[2013-11-04 05:41:39] Accepted 01c0d4f4 Diff 146/37 BAJ 12 pool 2
[2013-11-04 05:41:40] Accepted 0557207a Diff 48/37 BAJ 16 pool 2
[2013-11-04 05:41:42] Accepted 736fe14f Diff 568/32 BAJ 1 pool 3
[2013-11-04 05:41:44] Accepted 014c91dc Diff 197/32 BAJ 4 pool 3
[2013-11-04 05:41:44] Accepted 06bad42c Diff 38/32 BAJ 8 pool 3
[2013-11-04 05:41:45] Accepted 02a756e8 Diff 96/32 BAJ 9 pool 3
[2013-11-04 05:41:45] Accepted 069b8966 Diff 39/37 BAJ 11 pool 2
[2013-11-04 05:41:47] Accepted 041775b3 Diff 63/32 BAJ 4 pool 3
[2013-11-04 05:41:51] Accepted 04419a6b Diff 60/37 BAJ 11 pool 2
[2013-11-04 05:41:53] Accepted 052bc753 Diff 50/37 BAJ 9 pool 2
[2013-11-04 05:41:58] Accepted 5d6981d9 Diff 702/37 BAJ 15 pool 2
[2013-11-04 05:41:59] Accepted 848fab84 Diff 494/32 BAJ 1 pool 3
[2013-11-04 05:42:01] New block detected on network before longpoll
[2013-11-04 05:42:01] Pool 3 stale share detected, submitting as user requested
[2013-11-04 05:42:01] Accepted 0724f753 Diff 36/32 BAJ 4 pool 3
[2013-11-04 05:42:04] Stratum from pool 1 requested work restart
[2013-11-04 05:42:06] Stratum from pool 0 requested work restart
[2013-11-04 05:42:06] Pool 2 difficulty changed to 32.949399
[2013-11-04 05:42:06] Stratum from pool 2 requested work restart

I came back at 10:08 or really close to that. Odd that it stopped on a restart. Well a series of restarts.

Raspberry pi running arch and quotas to split hashing to 3 pools. Do the quota numbers matter? Failover only is also enabled so that the two backups should only work as backups.

▄▄ ▄█▀▀█▄ ▄█▀ ▄▄ ▀█▄ ▀ ▄████▄ ▀ ▄▀ ▄ ▀████▀ ▄ ▀▄ ▄▀ ▄███▄ ▀▀ ▄███▄ ▀▄ █ ███████ ███████ █ ▀▄ ▀███▀ ▄▄ ▀███▀ ▄▀ ▀▄ ▀ ▄████▄ ▀ ▄▀ ▄ ▀████▀ ▄ ▀█▄ ▀▀ ▄█▀ ▀█▄▄█▀ ▀▀ ███████████████████████████████████████████████████████████████████ ██████▀▀▀▀▀▀▀▀▀▀▀██████████▀▀▀▀▀████▀▀▀▀▀█████▀▀▀▀█████▀▀▀▀▀███████ ██████ ▀████████ ████ █████ █████ ███████ ██████ ▄▄▄▄▄ ▀██████ █████ ████ ████ ████████ ██████ ██████▄ █████ █████ ▀██▀ ▄▄ ▀██▀ ████████ ██████ ███████ █████ ██████ ██ ██ ██ █████████ ██████ ███████ █████ ██████ ██ ██ ██ █████████ ██████ ███████ █████ ██████ █ ██ █ █████████ ██████ █████▀ ██████ ███████ ████ ██████████ ██████ ▀▀▀▀▀ ▄██████ ████████ ██████ ███████████ ██████ ▄████████ ████████ ██████ ███████████ ██████▄▄▄▄▄▄▄▄▄▄▄██████████▄▄▄▄▄█████████▄▄▄▄██████▄▄▄▄████████████ ███████████████████████████████████████████████████████████████████ .DIWtoken.com. ▄██████████████████▄ ███ ▄█▀███████ ███ ██████████ ███ ██████████ ███ ██████████ ███ ███ ███ ▄▄▄▄▄▄▄▄ ███ ███ ▄▄▄▄▄▄▄▄ ███ ███ ███ ███▄▄▄▄▄▄▄▄▄▄▄▄▄▄███ ▀██████████████████▀ ▄██████████████████▄ ███████████▀ ███████ █████████▀ ███████ ███████▀ ██▀ ███ ███ ▀▀ █▄▄████ ███ █▀▀▀▀██ ███ ▄▄ ███████ ███████▄ █▄ ▀███ █████████▄ ███▄███ ███████████▄ ███████ ▀██████████████████▀ ▄██████████████████▄ ████████████████████ ███████████████▀▀ ██ █████████▀▀ ▄ ███ ████▀▀ ▄█▀ ███ ███▄ ▄██ ███ █████████▀ ▄███ ██████████▄ ████ █████████████▄ ▄████ ████████████████████ ▀██████████████████▀ ......SECURITY DECENTRALIZED...

LB72

Newbie

Offline

Activity: 19
Merit: 0

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 06:57:41 PM

#13194

HI

I use cgminer 3.7 and the message :

KnC spi: Can not open SPI devicedev/spidev1.0: No such file or directory

I don't use KNC Miner. How can I disable that ?

OS : Archlinux

Thank you

centove

Full Member

Offline

Activity: 194
Merit: 100

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 07:16:43 PM

#13195

Quote from: Illutian on November 04, 2013, 03:13:58 PM

Quote from: -Redacted- on November 04, 2013, 02:15:49 PM

Try the up and down arrows...

That only works with bfgminer, cgminer don't appear to do any sort of keyboard control.

Give me Btc: 1BRkf5bwSVdGCyvu4SyYBiJjEjbNiAQoYd Mine on my node: http://ask.gxsnmp.org:9332/

Taugeran

Hero Member

Offline

Activity: 658
Merit: 500

CCNA: There i fixed the internet.

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 07:18:37 PM

#13196

Quote from: LB72 on November 04, 2013, 06:57:41 PM

HI

I use cgminer 3.7 and the message :

KnC spi: Can not open SPI devicedev/spidev1.0: No such file or directory

I don't use KNC Miner. How can I disable that ?

OS : Archlinux

Thank you

did you compile from scratch?

Bitfury HW & Habañero : 1.625Th/s
tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1
Come join Coinbase

loshia

Legendary

Offline

Activity: 1610
Merit: 1000

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 08:09:21 PM

#13197

I have noticed that 3.7 problems during start are caused by
Make calls to flush queue and flush work asynchronous wrt to the maincomit
What happens is that flush_queue is using qlock which might be not initialized from hotplug when there are more USB miners connected
Simple if(cgpu) check is solving that issue for me

Please help the Led Boy aka Bicknellski to make us a nice Christmas led tree and pay WASP membership fee here:
https://bt.irlbtc.com/view/643999.msg7191563#msg7191563
And remember Bicknellski is not collecting money from community;D

-ck (OP)

Legendary

Offline

Activity: 4578
Merit: 1695

Ruu \o/

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 08:56:55 PM

#13198

Quote from: Illutian on November 04, 2013, 01:35:55 PM

Quote

(5s):5.942G (avg):5.883Gh/s | A:252 R:0 HW:4 WU:76.0/m

I assume you're on windows if you can't resize your command prompt window. There is compact mode which summarises them only, and you can change your command prompt window by right clicking on the window frame and choosing settings and change the default to more rows.

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck

-ck (OP)

Legendary

Offline

Activity: 4578
Merit: 1695

Ruu \o/

Re: Pool 'stall' issue in 3.6.6

November 04, 2013, 08:58:09 PM

#13199

Quote from: dlasher on November 04, 2013, 04:22:48 PM

[snip comments about 'waiting for pool issue']

Quote from: ckolivas on November 03, 2013, 09:17:58 PM

Thanks, heard more comments about people running into it over the weekend from KNC users, who, of course in 0.98 firmware, went to cgminer 3.6.6.

by the way, is this the fix:

Quote

- Use a non blocking connect with a 1 second select timeout when initiating
stratum to allow us to iterate over all IPs returned by getaddrinfo in round
robin DNS pools.

Thanks. No that wasn't the change and it looks like I didn't fix it anyway and it's a separate issue based on post release bug reports. More coming soon...

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck

-ck (OP)

Legendary

Offline

Activity: 4578
Merit: 1695

Ruu \o/

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.6.6

November 04, 2013, 08:59:07 PM

#13200

Quote from: LB72 on November 04, 2013, 06:57:41 PM

HI

I use cgminer 3.7 and the message :

KnC spi: Can not open SPI devicedev/spidev1.0: No such file or directory

I don't use KNC Miner. How can I disable that ?

OS : Archlinux

Thank you

You built it yourself with knc support. Don't do that.

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck

Pages: « 1 ... 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 [660] 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 ... 843 »

Page 659

Viewing Page: 660