<<  >> (p.719)
    Author Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1  (Read 5806556 times)
    This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic. (3 posts by 1+ user deleted.)

    • Degolep
    Full Member
    ***
    Offline Offline

    Activity: 210
    Merit: 100


    View Profile
    February 10, 2014, 08:19:07 PM
     #14361
    thx.

    with my ATI 7950 stock(880/1250) I get max 520KH/s which results in 7 hours 1k DOGE.

  • Gandalfs Mentor
    Newbie
    *
    Offline Offline

    Activity: 40
    Merit: 0


    View Profile
    February 11, 2014, 05:15:45 AM
     #14362
    Quote from: Internet151 on February 09, 2014, 07:32:38 PM
    Quote from: ckolivas on February 09, 2014, 04:37:55 PM
    Quote from: Internet151 on February 09, 2014, 04:03:40 PM
    So I recently tried updating cgminer on two of my windows machines from 3.12.0 to 3.12.3 that are connected to multiple hashfast babyjets, and whenever I try running 3.12.3 cgminer just crashes on startup, yet 3.12.0 works...

    Quote from: ckolivas on February 07, 2014, 10:24:43 PM
    I strongly advise people wait till they have new firmware as the new cgminer code is optimised around it and vice versa.

    Sorry keeping up with everything is hard sometimes.

    When's the new firmware being released?
    Greetings masked brother from another mother,

    Take and start 3.12.0 and enter the url, user, and password ~IE get it running...
    Now start 3.12.3 and again enter the url, user and password data ~when it starts, shut down 3.12.0 with Q command.

    This worked on my 2012 Server... it runs for a while then crashes, I'm still poking it with a stick so I can't say much more at the moment.

    I realize this is a horrible hack, forgive me CK

  • coolice
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    February 11, 2014, 01:33:27 PM
     #14363
    Hi, this is newcomer here.

    Does anybody know why I'm getting such screen output on Linux? It seems under debug mode
    It was normal under Windows

    https://i.imgur.com/cr1W2oD.png

    https://i.imgur.com/At0wK9x.png

    Thanks!

  • rgr_rgr
    Member
    **
    Offline Offline

    Activity: 115
    Merit: 10


    View Profile
    February 11, 2014, 03:31:26 PM
     #14364
    I guess you have forgotten to install libncurses5-dev. Or it is a version too old. Check output of ./configure.

  • chek2fire
    Legendary
    *
    Offline Offline

    Activity: 3430
    Merit: 1142


    Intergalactic Conciliator


    View Profile
    February 11, 2014, 05:13:19 PM
     #14365
    The last version of cgminer is the most stable version i ever use. I run it for three days now without any crash. My system is some icarus,some antminer, some bifure some nanofury and a pinch of redfury Tongue
    http://www.bitcoin-gr.org
    4411 804B 0181 F444 ADBD 01D4 0664 00E4 37E7 228E

  • Globalm
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    February 11, 2014, 06:58:38 PM
     #14366
    Hi.  Complete n00b here!

    I have searched but may not be specifying the correct terminology so apologies in advance.

    I am attempting to run cgminer under Windows 7 to mine Maxcoin using my GPU (AMD 6770).

    Cgminer starts for a couple of seconds and then dies.  Log output is as follows

    Quote
    [18:32:45] Log date is now 2014-02-11
     [18:32:45] Started cgminer 3.7.3
     [18:32:45] CL Platform 0 vendor: Intel(R) Corporation
     [18:32:45] CL Platform 0 name: Intel(R) OpenCL
     [18:32:45] CL Platform 0 version: OpenCL 1.1
     [18:32:45] Platform 0 devices: 0
     [18:32:45] CL Platform 1 vendor: Advanced Micro Devices, Inc.
     [18:32:45] CL Platform 1 name: AMD Accelerated Parallel Processing
     [18:32:45] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.5)
     [18:32:45] Platform 1 devices: 1
     [18:32:45]    0   Juniper
     [18:32:45] GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_68BA&SUBSYS_31551682&REV_00_4&B77C4C1&0&0008A iBusNumber 1 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName  AMD Radeon HD 6700 Series
     [18:32:45] GPU 0 AMD Radeon HD 6700 Series hardware monitoring enabled
     [18:32:45] GPU 0 BIOS partno.: 113-HD677AZNF81-113-AC35000-100, version: 012.020.000.055, date: 2011/04/16 01:33
     [18:32:45] Probing for an alive pool
     [18:32:45] Popping work to stage thread

    Output of cgminer -ndevs is as follows

    Quote
    [18:48:46] Log date is now 2014-02-11
     [18:48:46] CL Platform 0 vendor: Intel(R) Corporation
     [18:48:46] CL Platform 0 name: Intel(R) OpenCL
     [18:48:46] CL Platform 0 version: OpenCL 1.1
     [18:48:46] Platform 0 devices: 0
     [18:48:46] CL Platform 1 vendor: Advanced Micro Devices, Inc.

     [18:48:46] CL Platform 1 name: AMD Accelerated Parallel Processing

     [18:48:46] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.5)

     [18:48:46] Platform 1 devices: 1
     [18:48:46]     0       Juniper
     [18:48:46] GPU 0 AMD Radeon HD 6700 Series hardware monitoring enabled

     [18:48:46] GPU 0 BIOS partno.: 113-HD677AZNF81-113-AC35000-100, version: 012.02
    0.000.055, date: 2011/04/16 01:33
     [18:48:46] 1 GPU devices max detected


    Can anyone shed any light on this problem or suggest further diagnostics.  All drivers are up to date.

    Many thanks.

  • Globalm
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    February 11, 2014, 11:14:08 PM
     #14367
    Quote
    MaxCoin uses SHA-3, cgminer does not.

    Thanks for that.

    Cgminer command line reads

    cgminer.exe --keccak --no-submit-stale -o stratum+tcp://maxpool.1gh.com:17333 -u MyPasswordGoesHere -p x -I 9 -D 2>c:\temp\cgminer.log

    I understood that SHA-3 and keccak were, effectively, the same.  If this is wrong then the advice in many places that cgminer 3.7.3 is suitable for Maxcoin mining must be incorrect.  It is often downloadable as a .zip called 'cgminer3.7.3_maxcoin.zip'.

    Seems strange!

    Any recomendations for a suitable GPU miner for Maxcoin?

    Thanks again.

  • kano
    Legendary
    *
    Offline Offline

    Activity: 4732
    Merit: 1906


    Linux since 1997 RedHat 4


    View Profile
    February 11, 2014, 11:20:38 PM
     #14368
    Quote from: Globalm on February 11, 2014, 11:14:08 PM
    Quote
    MaxCoin uses SHA-3, cgminer does not.

    Thanks for that.

    Cgminer command line reads

    cgminer.exe --keccak --no-submit-stale -o stratum+tcp://maxpool.1gh.com:17333 -u MyPasswordGoesHere -p x -I 9 -D 2>c:\temp\cgminer.log

    I understood that SHA-3 and keccak were, effectively, the same.  If this is wrong then the advice in many places that cgminer 3.7.3 is suitable for Maxcoin mining must be incorrect.  It is often downloadable as a .zip called 'cgminer3.7.3_maxcoin.zip'.

    Seems strange!

    Any recomendations for a suitable GPU miner for Maxcoin?

    Thanks again.
    You are not using cgminer.
    There is no --keccak in cgminer.
    You are downloading a version from someone else.
    Who knows what is in that binary .............
    Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee   Bitcointalk thread: Forum
    Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
    The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer

  • Globalm
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    February 11, 2014, 11:24:12 PM
     #14369

    [/quote]
    You are not using cgminer.
    There is no --keccak in cgminer.
    You are downloading a version from someone else.
    Who knows what is in that binary .............
    [/quote]

    Got it.

    I found this in Github (part of README for this)

    "This is a modified cgminer software for Maxcoin stratum mining."

    The author is someone called 'Reorder'.

    I guess I need to seek help elsewhere.

    Thanks.

  • Entropy-uc
    Hero Member
    *****
    Offline Offline

    Activity: 756
    Merit: 501


    View Profile
    February 12, 2014, 02:35:26 AM
     #14370
    Con Kano:

    What is the situation with Cointerra?  Did they provide test hardware arrange for driver development in cgminer? 

    I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    February 12, 2014, 03:01:57 AM
     #14371
    Quote from: Entropy-uc on February 12, 2014, 02:35:26 AM
    Con Kano:

    What is the situation with Cointerra?  Did they provide test hardware arrange for driver development in cgminer?  

    I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.
    Cointerra developed the communication protocol entirely based on my discussions with them and the driver for cgminer I wrote completely. Once hardware is in regular customers' hands I will push the driver to the master cgminer code. They are straight forward USB devices that are connected to a beaglebone black for standalone operation but you can unplug the beaglebone and plug a regular PC into their USB. I personally do not have any hardware yet, as I have only worked on them remotely.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck

  • Entropy-uc
    Hero Member
    *****
    Offline Offline

    Activity: 756
    Merit: 501


    View Profile
    February 12, 2014, 03:27:03 AM
     #14372
    Quote from: ckolivas on February 12, 2014, 03:01:57 AM
    Quote from: Entropy-uc on February 12, 2014, 02:35:26 AM
    Con Kano:

    What is the situation with Cointerra?  Did they provide test hardware arrange for driver development in cgminer?  

    I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.
    Cointerra developed the communication protocol entirely based on my discussions with them and the driver for cgminer I wrote completely. Once hardware is in regular customers' hands I will push the driver to the master cgminer code. They are straight forward USB devices that are connected to a beaglebone black for standalone operation but you can unplug the beaglebone and plug a regular PC into their USB. I personally do not have any hardware yet, as I have only worked on them remotely.

    There are in customer hands at this point.  It looks like there is some work needed on stability at least.

    Let me know if you need access to multiple systems for testing.

  • jimjam1210
    Newbie
    *
    Offline Offline

    Activity: 56
    Merit: 0


    View Profile
    February 12, 2014, 07:42:26 AM
     #14373
    trying to use an older 3.72 version with my imac in built gpu put a srypct server in mining like sha256 where is config how do i change what its doing looked in appsupport nothing please help
    how do i flip to scrypt mining running 10.6.8
    help please

  • jimjam1210
    Newbie
    *
    Offline Offline

    Activity: 56
    Merit: 0


    View Profile
    February 12, 2014, 09:40:50 AM
     #14374
    found config file in a hidden file in users.cgminer/cgminer.config still wont run scrpt can any one send me an example config that will work as i ahve tried what i know and still doin mh in kh weird

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    February 12, 2014, 09:52:08 AM
     #14375
    Quote from: Entropy-uc on February 12, 2014, 03:27:03 AM
    Quote from: ckolivas on February 12, 2014, 03:01:57 AM
    Quote from: Entropy-uc on February 12, 2014, 02:35:26 AM
    Con Kano:

    What is the situation with Cointerra?  Did they provide test hardware arrange for driver development in cgminer?  

    I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.
    Cointerra developed the communication protocol entirely based on my discussions with them and the driver for cgminer I wrote completely. Once hardware is in regular customers' hands I will push the driver to the master cgminer code. They are straight forward USB devices that are connected to a beaglebone black for standalone operation but you can unplug the beaglebone and plug a regular PC into their USB. I personally do not have any hardware yet, as I have only worked on them remotely.

    There are in customer hands at this point.  It looks like there is some work needed on stability at least.

    Let me know if you need access to multiple systems for testing.
    Cointerra driver now merged into the cgminer master code. Numerous generic fixes from cgminer itself likely are in the cgminer master code based on cgminer 3.12.3 that are not in the standalone software released with the hardware in the beaglebone black. Without actual hardware it is distinctly possible there are bugs I have been unable to reproduce and debug so far, so if you wish to give me access to hardware to mine with it to test the software, please pm me.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck

  • jimjam1210
    Newbie
    *
    Offline Offline

    Activity: 56
    Merit: 0


    View Profile
    February 12, 2014, 11:38:34 AM
     #14376
     could anyone  send me a config to mine any script coin

     Invalid config option --scrypt: Invalid value this is the error here is the config where am i going wrong
     {
    "pools" : [
       {
          "url" : "stratum+tcp://euro1.coinhuntr.com:3333",
          "user" : "jimjam1210.jimjam",
          "pass" : ""
       }
    ]
    ,
    "intensity" : "d",
    "vectors" : "2",
    "worksize" : "128",
    "kernel" : "poclbm",
    "lookup-gap" : "0",
    "thread-concurrency" : "0",
    "shaders" : "0",
    "api-mcast-port" : "4028",
    "api-port" : "4028",
    "expiry" : "120",
    "gpu-dyninterval" : "7",
    "gpu-platform" : "0",
    "gpu-threads" : "2",
    "hotplug" : "5",
    "log" : "5",
    "no-pool-disable" : true,
    "queue" : "0",
    "scan-time" : "60",
    "scrypt" : "true",
    "shares" : "0",
    "kernel-path" : "/Users/kcupit/Desktop/cgminer/x86_64/cgminer/bin"

  • kano
    Legendary
    *
    Offline Offline

    Activity: 4732
    Merit: 1906


    Linux since 1997 RedHat 4


    View Profile
    February 12, 2014, 11:46:01 AM
     #14377
    Quote from: jimjam1210 on February 12, 2014, 11:38:34 AM
    could anyone  send me a config to mine any script coin
    ...
    Please take this elsewhere.
    cgminer has no GPU or alt-coin code in it.
    Only old unsupported versions do.
    Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee   Bitcointalk thread: Forum
    Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
    The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer

  • ShiNoDaX
    Newbie
    *
    Offline Offline

    Activity: 8
    Merit: 0


    View Profile
    February 12, 2014, 01:11:27 PM
     #14378
    i have asic blade 10.7 GHS i want mining in site www.cex.io -what do I do ?
    how config menu (ASICMiner Blade Setup)
    http://www3.0zz0.com/2014/02/12/13/555823398.jpg

  • RaTTuS
    Hero Member
    *****
    Offline Offline

    Activity: 792
    Merit: 1000


    Bite me


    View Profile
    February 12, 2014, 01:47:01 PM
     #14379
    Quote from: ShiNoDaX on February 12, 2014, 01:11:27 PM
    i have asic blade 10.7 GHS i want mining in site www.cex.io -what do I do ?
    how config menu (ASICMiner Blade Setup)
    ...
    find a correct thread to post in - this has nothing whatever to do with cgminer
    In the Beginning there was CPU , then GPU , then FPGA then ASIC, what next I hear to ask ....

    1RaTTuSEN7jJUDiW1EGogHwtek7g9BiEn

  • jimjam1210
    Newbie
    *
    Offline Offline

    Activity: 56
    Merit: 0


    View Profile
    February 12, 2014, 10:37:18 PM
     #14380
    Quote from: kano on February 12, 2014, 11:46:01 AM
    Quote from: jimjam1210 on February 12, 2014, 11:38:34 AM
    could anyone  send me a config to mine any script coin
    ...
    Please take this elsewhere.
    cgminer has no GPU or alt-coin code in it.
    Only old unsupported versions do.
    dude when the post was made it said mac osx linux pc

    it might be an older version but thread still relevant who can help me with config ?
    Pages: « 1 ... 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 [719] 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 ... 843 »
      Print  
Page 718
Viewing Page: 719

IRLBTC™ © 2025 IRLBTC.com