Anyone had luck with Raspberry Pi wheezy?

Great, i am looking for it 

Anyone managed to get the latest bfgminer to compile on FreeBSD 9.2-RELEASE?

The configure script can't seem to find libusb for some reason which is in the standard location  /usr/lib/libusb.a

I got bfgminer to compile on my Mac with Snow Leopard, but it gives a segfault when I try and mine. No luck on either platform.

I tried Debian linux and the bfgminer configure can't find hidapi even though it's compiled and installed.

This is pissing me off, I just want to run the NF1 I don't have a spare windows machine to put it on, only Mac, FreeBSD, or Linux.

Did you try cgminer ?

With Gentoo, you can just emerge bfgminer with the nanofury USE flag.

I've tested another HID miner on Debian with no problems, so I would be surprised if NanoFury didn't work as well.

Note the README's FAQ entry "Q: Why can't BFGMiner find lib<something> even after I installed it from source code?" for actually running, after you get it built...

# ./bfgminer -S NFY:all -d? -D
 [2013-11-20 09:17:05] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096)                    
 [2013-11-20 09:17:05] Started bfgminer 3.6.0                    
 [2013-11-20 09:17:05] hidapi_try_lib: Couldn't load libhidapi.so: libhidapi.so: cannot open shared object file: No such file or directory                    
 [2013-11-20 09:17:05] hidapi_try_lib: Couldn't load libhidapi-0.so: libhidapi-0.so: cannot open shared object file: No such file or directory                    
 [2013-11-20 09:17:05] hidapi_try_lib: Successfully loaded libhidapi-hidraw.so                    
 [2013-11-20 09:17:05] hid_devinfo_scan: Found "NanoFury NF1 v0.6" serial "0000073625"                    
 [2013-11-20 09:17:05] lowlevel_scan: Found usb device at usb:002:004 (path=(null), vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1 v0.6, serial=0000073625)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found usb device at usb:005:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 2.6.32-23-pve uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.3)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found usb device at usb:004:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 2.6.32-23-pve uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.2)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found usb device at usb:003:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 2.6.32-23-pve uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.1)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found usb device at usb:002:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 2.6.32-23-pve uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.0)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=1d6b, pid=0002, manuf=Linux 2.6.32-23-pve ehci_hcd, prod=EHCI Host Controller, serial=0000:00:1d.7)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found hid device at hid:/dev/hidraw0 (path=/dev/hidraw0, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1 v0.6, serial=0000073625)                    
 [2013-11-20 09:17:05] lowlevel_scan: Found mcp2210 device at hid:/dev/hidraw0 (path=/dev/hidraw0, vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1 v0.6, serial=0000073625)                    
 [2013-11-20 09:17:05] mcp2210_get_configs: Failed to get current SPI config                    
 [2013-11-20 09:17:05] nanofury_foundlowl: Matched "NanoFury NF1 v0.6" serial "0000073625", but mcp2210 lowlevel driver failed to open it                    
 [2013-11-20 09:17:05] Devices detected:                    
 [2013-11-20 09:17:05] Timers: Using clock_gettime(CLOCK_MONOTONIC_RAW)                    
0 devices listed