Bitcointalk Mobile Browser presented by IRLBTC™

Quote from: kkmonte on January 18, 2024, 10:43:00 PM

January 18, 2024, 10:54:58 PM
Last edit: January 19, 2024, 01:32:51 PM by willi9974

#41

Thanks, maybe 2024 will be our lucky year! have you done any block parties lately?

I run the Blockparty runs every one two weeks. The last was done yesterday and we start organizing the next one this or latest beginning next week.

~~I can post the link here or have a look at the cksolo pool topic.~~

UPDATE: here is the next Blockparty number 57 https://bt.irlbtc.com/view/5237323.msg63523593#msg63523593

Best regards,
Willi

################

new Firmware Version

https://github.com/skot/ESP-Miner/releases

v2.0.6 Latest
What's Changed
revert the order of mining.configure and mining.subscribe by @skot in #81
Full Changelog: v2.0.5...v2.0.6

Known Issues
Some pools complain about the ordering of mining.configure and mining.subscribe but should still work. We are still investigating this issue in #80

Quelle: https://github.com/skot/ESP-Miner/releases

Best regards
Willi

░░░░▄▄████████████▄
░▄████████████████▀
▄████████████████▀▄█▄
▄███████▀▀░░▄███▀▄████▄
▄██████▀░░░▄███▀░▀██████▄
██████▀░░▄████▄░░░▀██████
██████░░▀▀▀▀░▄▄▄▄░░██████
██████▄░░░▀████▀░░▄██████
▀██████▄░▄███▀░░░▄██████▀
▀████▀▄████░░▄▄███████▀
▀█▀▄████████████████▀
▄████████████████▀░
▀████████████▀▀░░░░

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

100knot2dae

Member

Activity: 100
Merit: 29

January 19, 2024, 10:07:57 PM

#42

Hello Willi, nice idea with the miner race!

I just configured my 4 NewPacs to mine to your willipool address:

Username: 100knot2dae
Device type: 4x NewPac
Normal speed: 352 GH/s

se7en6301

Newbie

Activity: 1
Merit: 0

January 21, 2024, 04:10:30 PM

#43

Hello everyone!
I want too join too i just point my miner to solo ck pool

username : se7en6301
Miner : r909 gekko
Hash avg : 1.7 t or more

Good luck TO US !

willi9974 (OP)

Legendary

Activity: 4284
Merit: 4163

♻️ Automatic Exchange

Quote from: se7en6301 on January 21, 2024, 04:10:30 PM

January 21, 2024, 07:43:09 PM

#44

Hello everyone!
I want too join too i just point my miner to solo ck pool

username : se7en6301
Miner : r909 gekko
Hash avg : 1.7 t or more

Good luck TO US !

Quote from: 100knot2dae on January 19, 2024, 10:07:57 PM

Hello Willi, nice idea with the miner race!

I just configured my 4 NewPacs to mine to your willipool address:

Username: 100knot2dae
Device type: 4x NewPac
Normal speed: 352 GH/s

Welcome and cross our fingers for a big big bestshare to crack maybe a block in the future

Amazing how many miner come inter the small idea from me. It makes fun and if you have time, take photo and share it with us how your mining setup looks like. I love that Kinde of pics

Best regards,
Willi

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

kkmonte

Newbie

Activity: 29
Merit: 4

January 21, 2024, 08:41:18 PM

#45

Hey Willi, here are two pics of my setup. The S9's were old and the previous person who owned them ran them hot and didn't clean them, they were so dirty when i got them, I had to task them all apart, and the control boards won't work with more than 1 hashboard connected so as you see on the left i had to use 3 control boards to control each hashboard. But having them in one enclosure saves me on the number of fans being run (control board 2 and 3 are set up in immersion mode) and I just let one control board run the fan at 8% speed (that is enough). I also am using two modular 1000w power supplies that I had, that are completely silent. Both of these miners don't make hardly any sound, but produce a little bit of heat. They are only pulling about 680 watts at the wall.

https://i.postimg.cc/FHggZSmS/20240121-153149.jpg

https://i.postimg.cc/nhtGB28Z/20240121-153215.jpg

willi9974 (OP)

Legendary

Activity: 4284
Merit: 4163

♻️ Automatic Exchange

January 22, 2024, 11:05:41 AM

#46

There is a new firmware for the small Bitaxe

v2.0.7 Latest
Power management will now use the board version to distinguish capabilities
New Stratum password field
Version rolling now properly configured by stratum server

I have updated the list of miners and added a few pictures I got from one or the other miner here in the topic.

Happy Mining
Willi

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

Teraz08

Newbie

Activity: 3
Merit: 0

January 25, 2024, 12:22:46 AM

#47

Good day! I would like to join the pool

I just setup my device and so don't have 7 days in CKpool yet, but I understand the payout rules. I've pointed my miner at the address as of today!

Username: Teraz08_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 400 GH/s

willi9974 (OP)

Legendary

Activity: 4284
Merit: 4163

♻️ Automatic Exchange

Quote from: Teraz08 on January 25, 2024, 12:22:46 AM

January 25, 2024, 06:02:35 AM

#48

Good day! I would like to join the pool

Welcome on our small pool.
Cross our fingers to find a block.

With the statistic link you can see your and all the other miner and also have a look to the 7day rule.

https://solorun.lima.zone/ (simple overview)

Best regards,
Willi

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

Marslander

Newbie

Activity: 11
Merit: 0

January 25, 2024, 05:16:50 PM

#49

hello, I am new, I have just acquired: mars lander (bitcoin merch) with 3 gekko science key (BM 1397)

I should provide between 925 and 960 GH/s.

I will have a question, as I participate if there is a gain (I would see it on the PI zero Wh which manages the mining software has an oled)

how I would be paid, because the mining address is that of our team (I have a personal BTC address). Thank you for your answers .

Sledge0001

Full Member

Activity: 691
Merit: 166

Quote from: Marslander on January 25, 2024, 05:16:50 PM

January 25, 2024, 06:29:25 PM

#50

You will need to mine to the BTC address listed bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c as seen in his example on the first page of this thread:

https://bt.irlbtc.com/view/5478927.0
Example:

User "Willi9974" with 2 miners

configure the first miner with: bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.willi9974_1
configure the second miner with: bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.willi9974_2

I can personally attest to Willii9974's honesty and trust.

https://www.SoloPool.com/
https://x.com/SoloPoolBTC

Marslander

Newbie

Activity: 11
Merit: 0

January 25, 2024, 06:57:49 PM

#51

thank you for your return, I have correctly put the BTC address provided (I currently provide 941 GH/s) it is necessary to leave a few hours for stability (GH/s)

willi9974 (OP)

Legendary

Activity: 4284
Merit: 4163

♻️ Automatic Exchange

Quote from: Marslander on January 25, 2024, 06:57:49 PM

January 25, 2024, 07:02:05 PM

#52

thank you for your return, I have correctly put the BTC address provided (I currently provide 941 GH/s) it is necessary to leave a few hours for stability (GH/s)

Welcome Marslander,

i have nothing to add, Sledge0001 has all explained, thanks for that.
But i have one wish, we would collect some pictures of our miner here. if you have time take a picture and link it in a posting, so i can add it on our first page.

Thanks and best regards,
Willi

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

Marslander

Newbie

Activity: 11
Merit: 0

January 25, 2024, 07:16:16 PM

#53

I have a picture, but I don't know how to publish it (the picture is on my PC).

kkmonte

Newbie

Activity: 29
Merit: 4

January 26, 2024, 10:44:31 PM

#54

I whispered to all of my miners today, that I only want them to submit work that results in at least 1T+ best shares, so we'll see if they listen...

paid2

Legendary

Activity: 1162
Merit: 3772

Quote from: Marslander on January 25, 2024, 07:16:16 PM

January 26, 2024, 10:46:28 PM

#55

I have a picture, but I don't know how to publish it (the picture is on my PC).

You can use this service: https://www.talkimg.com/

You just need to copy/paste the link provided in your reply

0id1d

Newbie

Activity: 15
Merit: 7

January 27, 2024, 10:13:56 AM

#56

Hi @willi8874, my Compac F has been having some problems so I'm pointing this at the pool for now until I get it running again:

Device: Apollo BTC
Speed: 2 TH/s

Danke!

willi9974 (OP)

Legendary

Activity: 4284
Merit: 4163

♻️ Automatic Exchange

Quote from: 0id1d on January 27, 2024, 10:13:56 AM

January 27, 2024, 12:54:43 PM

#57

Hi @willi8874, my Compac F has been having some problems so I'm pointing this at the pool for now until I get it running again:

Device: Apollo BTC
Speed: 2 TH/s

Danke!

Hi 0id1d

thanks for the information, if it is only for some days, i let the old device in the table. is it for longer or ever, i can edit your device type, no problem.

i have also update the miner list on page one and nice to the the new miner and the new bestshares in the top 10 list...

very nice and a block would be even nicer Grin

Best regards and a nice weekend, happy mining.
Willi

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

Marslander

Newbie

Activity: 11
Merit: 0

January 27, 2024, 02:01:38 PM
Last edit: January 27, 2024, 02:25:03 PM by Marslander

#58

hello thanks for help ( for picture )

https://www.talkimg.com/images/2024/01/27/kf5Zd.jpeg

950 GH/s currently, live monitoring via web interface (ip address)

https://www.talkimg.com/images/2024/01/27/kfgd2.jpeg

my usb keys also have another name: compact F 1397 asic chip (350 GH/s per key) provided they have 3 Amperes under 5 Volts. my keys are under 480 MH/z in terms of internal frequency from 490MH/z it becomes unstable because of not enough current. my usb hub supplied 12V for 10 A: supplied under 5.2 V 2.4 A *16 port. the hub is used to power the PI ZERO WH + all the fans. everything works perfectly without problems!

willi9974 (OP)

Legendary

Activity: 4284
Merit: 4163

♻️ Automatic Exchange

January 27, 2024, 04:47:45 PM

#59

Thanks for the cool Picture, i have add it on the first page

INSTANT CRYPTO EXCHANGE
^{BTC │ ETH │ TRX │ BNB │ XMR │ SOL │ LTC │ etc.}

kkmonte

Newbie

Activity: 29
Merit: 4